AliExpress P1S Watch Wireless Charger Power Bank User Manual
- June 13, 2024
- AliExpress
Table of Contents
AliExpress P1S Watch Wireless Charger Power Bank
Product Information
| Product Name | Watch Wireless Charger Power Bank |
|---|---|
| User Manual | Available |
| Specifications | Capacity: 1200 mAh |
Input: DC 5V 2A
Output: 3W (MAX)
Charging Port: Type-C
Conversion Efficiency: 73%
Adapter Selection: QC2.0/QC3.0/5W
Compatibility| P1A: Apple Watch Series Ultra/8/SE 2nd
Generation/7/6/SE/5/4/3/2
P1S: Samsung Galaxy Watch 5 Pro/Watch 5/Watch 4/Watch 4
Classic/Watch 3/Active 2
Safety Compliance| FCC RF radiation exposure limits
Product Usage Instructions
- Ensure the power bank is fully charged before use.
- Connect the power bank to a power source using the provided Type-C cable.
- Place your Apple Watch (compatible with P1A) or Samsung Galaxy Watch (compatible with P1S) on the wireless charging area of the power bank.
- The power bank will automatically start charging the smartwatch. The indicator light will turn blue to indicate the charging process.
- When the smartwatch is fully charged, the indicator light will turn sky blue and then extinguish after one minute.
- If the battery capacity of the power bank falls below 5%, the indicator light will turn red to alert you to recharge it.
- If foreign objects are detected in the wireless charging area, the indicator light will flash continuously.
- To turn off the power bank, press the power bank switch twice. The indicator light will turn off.
Thank you for using our products, please read the instruction card carefully before use
Specifications
- Capacity: 1200 mAh
- Input: DC 5V 2A
- Output: 3W (MAX)
- Charging Port: Type-C
- Conversion Efficiency: ≥73%
- Adapter Selection: QC2.0/QC3.0/5W
Compatibility
- P1A: Apple Watch Series Ultra/ 8/ SE 2nd Generation/ 7/ 6/ SE/ 5/ 4/ 3/ 2
- P1S: Samsung Galaxy Watch 5 Pro/ Watch 5/ Watch 4/ Watch 4 Classic/ Watch 3/ Active 2
Notice: P1 for Apple and Samsung watches have 2 devices, P1A and P1S, they are not universal.
Product Detail
Description
This product has an adsorption function, which can accurately align the charging position of the smartwatch.
Safety warning
- Do not put this product into fire or water to avoid short circuit leakage or damage to the product.
- Please check the product, data cable, and other accessories before use. Immediately stop using the product if you notice any damage.
- Do not use this product in a high temperature, humid or corrosive environment, so as not to damage the circuit and prevent charging or other
- Do not contact the product with corrosive liquids, otherwise, it will cause serious damage and the product will not be guaranteed.
- Do not disassemble or modify this product for any reason, so as to avoid secondary failure and burning, which is not covered by the warranty
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. During the operation of device a distance of 0 cm surrounding the device and 0 cm above the top surface of the device must be respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>