TeqHome LD-5702 Luggage Rack Crossbar Instructions
- June 1, 2024
- Teqhome
Table of Contents
TeqHome LD-5702 Luggage Rack Crossbar
Suitable for vehicles with no longitudinal roof rails, no reserved fixing points, T-rails and no rain gutter. The luggage rack is fixed to this type of roof by means of metal hooks on the door frame area. When the fixings are fully tightened, it provides a safe and secure base.
Specifications
| Packing List | Quantity | Description |
|---|---|---|
| 2 x Cross bar | 2 | Bars for the base of the luggage rack |
| 4 x Tower feet | 4 | Supports that connect to the vehicle |
| 4 x Knob | 4 | Knobs for adjusting and securing the rack |
| 4 x End cap | 4 | Caps for the ends of the cross bars |
| 4 x Gasket | 4 | Gaskets for cushioning between the rack and vehicle roof |
| 4 x Mounting brackets 30mm | 4 | Brackets to mount the rack to the vehicle |
| 4 x Mounting brackets 65mm | 4 | Larger brackets for mounting |
| 4 x Mounting brackets 85mm | 4 | Largest brackets for mounting |
| 4 x Rubber for bottom of the tube | 4 | Rubber padding for the bottom of the |
cross bars
4 x Rubber for tower feet| 4| Rubber padding for the tower feet
4 x Nut cover| 4| Covers for the nuts
4 x Silver bolt| 4| Metal bolts
Installation Steps
- Loosen the screws and install the Tower feet to the crossbars. Choose the corrected one from 3 different sizes of mounting brackets for your vehicle.
- Cover the end caps.
- Attach the rubber pad to the feet. Place the crossbar onto the roof, taking care that the feet are placed near the rain gutter.
- Open the door and hook the hook into the door frame. Fit the screws and gaskets.
- Put the nut into the knob and fit it to the screw!
- After closing the doors on both sides and catching the hooks, you can adjust the crossbar to the right position.
- Open one side of the door, lift up the crossbar side and use a spanner to fully torque the base screws!
- Twist the knob tightly on both sides.
- Please make sure that the crossbar has been firmly installed and will not wobble. The installation is complete.
Attention Points
- Please do not twist the screws tightly.
- The screws on both sides crossbars needs to be fully torqued.
- The knobs on both sides crossbars needs to be fully torqued.
- Check regularly if the luggage rack crossbar is firmly installed!
- Make sure that the crossbar has been firmly installed and will not wobble. The installation is complete.
FAQ
- How do I choose the correct size of mounting brackets?
- Choose one of the three different sizes of mounting brackets provided, according to your vehicle’s specifications.
- What should I do if the crossbar is wobbling?
- Ensure that the crossbar has been firmly installed and that the knobs and screws are fully torqued. If it continues to wobble, recheck the installation steps to ensure everything is correctly in place.
- How often should I check the installation?
- It is recommended to check regularly to ensure that the luggage rack crossbar remains firmly installed and secure.
- What is the purpose of the rubber pads?
- The rubber pads are used to cushion the contact between the feet of the rack and the vehicle’s roof, preventing damage and ensuring a secure fit.
- Can I over-tighten the screws?
- No, you should not over-tighten the screws as it may damage the components. However, ensure that all knobs and screws are fully torqued for a secure installation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>