SUN GLOW Fabric Valance Chainless Woven Roller Shade Instruction Manual
- June 3, 2024
- SUN GLOW
Table of Contents
SUN GLOW Fabric Valance Chainless Woven Roller Shade
The instructions below are ceiling mounting the fabric valance with a PVC angle.
INSTALL THE PVC ANGLE
Fasten the PVC angle to the ceiling in the appropriate position with the mounting screws. Make sure the Velcro strip side faces the room interior. Leave enough space for the shade to operate without interfering with the valance.
ATTACHING THE FABRIC VALANCE
Align the velcro strip on the fabric valance with the velcro strip on the
front of the plastic mounting angle. Start at one end and press the velcro
together. Continue this process for the entire length of the valance to ensure
a secure hold.
FABRIC VALANCE – WALL MOUNT
Installation Instructions
The following instructions are for wall mounting the fabric valance with snap- in wall brackets.
PREPARE THE MOUNTING BRACKETS
Attach plastic valance clips to all mounting brackets.
INSTALL THE MOUNTING BRACKETS
Mount each bracket to the wall using mounting screws.
INSTALL THE VELCRO MOUNTING STRIP
NOTE: IF RETURNS ARE REQUIRED, BEND THE ALUMINUM MOUNTING STRIP INTO SHAPE
BEFORE SNAPPING IT ONTO VALANCE CLIPS. (Fig 1)
Beginning at one end, snap the velcro mounting strip into the valance clips.
ATTACHING THE VALANCE
Align the velcro strip on the fabric valance with the velcro mounting strip. Start at one end and press the velcro together. Continue this process for the entire length of the valance to ensure a secure hold.