SUN GLOW W1 2C Remotes Stealth Automation Remotes User Manual
- May 15, 2024
- SUN GLOW
Table of Contents
SUN GLOW W1 2C Remotes Stealth Automation Remotes
Specifications
- Product: Stealth Automation Remotes
- Channels: 16
- Controller Types: Wall-Mounted LCD Remote, Hand-held LCD Remote
Product Information:
- The Stealth Automation Remotes are sophisticated 16-channel controllers available in both wall-mounted and hand-held LCD remote versions.
- These remotes provide users with convenient control over various automation systems.
Usage Instructions
Wall-Mounted 16-channel LCD Remote Controller
- Mount the remote on a suitable wall location for easy access.
- Short press the buttons to control individual channels.
- Channel 0 acts as a group control for all channels.
- Follow the on-screen prompts to include or exclude channels from the group.
Hand-held 16-channel LCD Remote Controller
- Hold the remote comfortably in your hand. Use the buttons to adjust settings for different channels.
- Similar to the wall-mounted remote, Channel 0 serves as a group control for all channels.
- Utilize the LCD screen for clear visibility of channel statuses.
FAQ
- Q: What should I do if the remote control distance is reduced or less sensitive?
- A: Check whether the battery needs replacement. Low battery voltage can affect the remote’s performance.
- Q: How do I dispose of used batteries from the remote?
- A: Please follow local garbage classification and recycling policies for proper disposal of used batteries.
Product Info
- Hand-held 16-channel LCD Remote Controller
- Wall-Mounted 16-channel LCD Remote Controller
Buttons
FRONT
- Hand-held 16-channel LCD Remote Controller
- Wall-Mounted 16-channel LCD Remote Controller
BACK
- Hand-held 16-channel LCD Remote Controller
- Wall-Mounted 16-channel LCD Remote Controller
Models & Parameters
Models & Parameters (more info please refer to the nameplate)
Caution!
- The remote controller should not be exposed to moisture or impact, so as not to affect its life.
- During use, when the remote control distance is significantly shorter or less sensitive, please check whether the battery needs to be replaced.
- When the battery voltage is too low, the LCD screen will show a low voltage prompt, prompting to replace the battery.
- Please properly dispose of used batteries according to the local garbage classification and recycling policy.
Instructions
Channels & Groups Toggling
Note: Channel 0 is the group control for all the channels.
Number of Channels Setting
Note: Max&Min number is 16&1 when it’s set under channels 1-16.
Number of Groups Setting
Note: Max&Min number is 6&0 when it’s set under channel 0.
Channel in Group Setting
Note: Channel in groups setting is under GROUP 1-6.
Check the Channels in Groups
Note: LCD will show “EC” if there is no detailed channel.
Prohibit Dual-key Operation
Note: When dual-key operation is prohibited, these programming setting functions are not allowed, such as limits setting.
Position Percent Setting
Note: All the shades under same group will run to same position after percent setting.
For other operations, please refer to the motor operation instruction