Geevon GN-228708-US-T Wireless Digital Rain Gauge User Manual

Geevon GN-228708-US-T Wireless Digital Rain Gauge

Specifications:

• Model: W208708
• Power Source: Display Unit – 3xAA batteries, Wireless Rain Gauge – 2xAA batteries, Outdoor Sensor – 2xAAA batteries
• Default Settings: Default time – 12:00 (12H format), Default date – 01/01/2021 (D/M format), Default week – FRI, Rainfall unit – IN
• Alarm Settings: ALARM1 at 6:00 AM, ALARM2 at 8:00 AM, default snooze time – 5min

Product Usage Instructions

Getting Started:

1. Place 3xAA batteries into the display unit.
2. Place 2xAA batteries into the wireless rain gauge.
3. Place 2xAAA batteries into the outdoor sensor.

Low Battery Indicator:
If the low battery indicator is displayed on the LCD for either the outdoor sensor or the display unit, immediately install new batteries to prevent disruptions.

Rainfall Function Operation:
The rainfall function operates in the order of NOW > HOUR> DAY > WEEK > MONTH

YEAR > TOTAL. The reading resets to zero after 30 minutes of no rain.

Outdoor Temperature and Rainfall Reception:
The device will automatically receive signals for outdoor temperature, humidity, and rainfall. If no signal is received, the RF reception will be turned on for 3 minutes every hour.

Week Display:
The week display feature shows the current day of the week.

FAQ:

Can the rain gauge remain outdoors in freezing temperatures?
The rain gauge is designed to withstand outdoor conditions,including freezing temperatures. However, it’s recommended to take precautions to prevent damage to batteries in extreme cold weather.

Troubleshooting:

2. Reinstall batteries.
3. Placeunits close together for a strong connection.
Display screen not working| Check power source and connections. Replace batteries if necessary.
Outdoor temperature and/or humidity flashing or showing dashes| Possible wireless interference. Bring units closer together and ensure proper battery installation.

GEEVON Rain Gauge
Item No.W208708
User Manual

Thank you for purchasing W208708 Rain Gauge.

Please take a moment to read this guide and store it for future reference

Controls and displays

1. Time display
2. Calendar
3. Indoor temperature
4. Outdoor sensor low battery displayicon
5. Outdoor temperature
6. Rainfall history display
7. Rainfall display
8. Main unit low battery display
9. Alarm icon
10. Weekday
11. Temperature/humidity MAX/MIN records
12. Indoor humidity
13. Rainfall alert
14. LIGHT/SNZ button
    • In normal mode, press this button to turn on/off the backlight for 5 seconds.
    • In the setting mode, press this button to exit the settings.
    • Press this button to enter the snooze mode when the Alarm rings.
15. MODE button
    • In normal mode, press this button to switch time format 12H/24H.
    • In ALARM or ALERT display mode, press this button to turn on/off ALARM/ ALERT.
    • In normal mode, press and hold this button to enter time setting mode.
    • In the setting mode, press this button to confirm the selection.
16. ALERT button
    • In normal mode, press this button to select ALARM1, ALARM2, rainfall ALERT.
    • In the alert mode, press and hold this button to set ALARM1, ALARM2, rainfall ALERT.
17. UP button
    • In normal mode, press this button to view the rainfall history (except NOW, TOTAL).
    • In the setting mode, press this button to increase in value.
    • In the setting mode, press and hold this button to increase in value quickly.
18. DOWN button
    • In normal mode, press this button to switch to display MAX/MIN temperature and humidity record.
    • In MAX/MIN display mode, press and hold this button to clear MAX/MIN memory.
    • In normal mode, press and hold this button to receive RF.
    • In the setting mode, press this button to increase in value.
    • In the setting mode, press and hold this button to increase in value quickly.
19. RAIN button
    • In normal mode, press this button to switch rainfall display mode(NOW, HOUR,DAY, WEEK, MONTH, YEAR, TOTAL).
    • In the current display mode, press and hold this button to clear this group of data (RESET).
20. Battery Compartment 3xAA (batteries not included)
21. Wireless signal indicator (Flashes when data is being sent to the display unit)
22. Compartment 2xAA batteries (batteries not included)
23. Wireless signal indicator(Flashes when data is being sent to the display unit)
24. Integrated hang hole
25. Compartment 2xAAA batteries (batteries not included)

Package Contents

1. Display Unit
2. Outdoor Sensor
3. Wireless rain gauge
4. Instructions Manual

Getting started

1. Place 3xAA batteries into the display unit.
2. Place 2xAA batteries into the wireless rain gauge.
3. Place 2xAAA batteries into the outdoor sensor.

Note:

• The range is 200 ft. (60m) unobstructed. The wireless range may be reduced by trees, walls, windows, etc.

Installing or Replacing Batteries

• We recommend using high quality alkaline batteries for the best product performance.
• Heavy duty or rechargeable batteries are not recommended.
• The outdoor sensor requires high quality alkaline batteries in low temperature conditions. Cold temperatures could cause other batteries to function improperly.
• Do not mix old and new batteries. Do not mix alkaline, standard, and/or rechargeable batteries.

Low Battery Indicator:

If the low battery indicator is displayed on the LCD for either the outdoor sensor or the display unit, please immediately install the new batteries to prevent disruptions in communications of the devices.

Default settings:

1. Default time: 12:00 (Time form: 12H)
2. Default date: 01/01 (Year: 2021, date form: D/M- unchangeable)
3. Default week: FRI (Language: EN, 7 languages can be selected)
4. Default temperature: °F
5. Rainfall unit: IN
6. Default alarm: AM 6:00(ALARM1), AM 8:00(ALARM2), default: off, default snooze time: 5min.

Operation

Manually Setting the Time, Date & Units:

• Press and hold the MODE button for 3 seconds until the display begins to flash.
• Set the following information in the order listed:
• BEEP(button sound)
• Rainfall unit
• Temperature unit
• Year
• Month
• Date
• Hour
• Minute
• Day of the week language: English, German, French, Italian, Spanish, Dutch and Swedish(Display the first 6 letters of the word).
• To select individual values, press UP button or DOWN button and confirm each selection by pressing the MODE button.

Note:
The dispaly unit will automatically exit settings mode if no buttons are pressed for 20 seconds.

Setting the alarm

• In standard mode, press ALERT button to enter the alarm mode. The setting order is ALARM1 > ALARM2 > ALERT > Exit.
• In “ALARM1/ALARM2” mode, press MODE button to turn on/off ALARM1/ALARM2. The alarm icon or will appear or disappear. Press and hold the ALERT button to enter the alarm setting mode, the setting order is Hour > Minute > Exit. Use the UP and DOWN button to set the required hour and minute.
• Press ALERT to exit and save the setting.
• To select individual values, press UP button or DOWN button and confirm each selection by pressing the ALERT button.
• The automatically exit settings mode if no buttons are pressed for 20 seconds. Stopping the alarm/snooze function
• When the alarm is triggered, the alarm symbol or alarm sounds.
• The alarm will stop ringing by pressing any button (except the LIGHT/SNOOZE button).

Note:
While the alarm is sounding, press the LIGHT/SNOOZE button to activate the snooze function. The alarm will sound again after 5 minutes. In snooze mode, the backlight will be on for 5 seconds.

Setting the rainfall alert

• In standard mode, press ALERT button to enter the alarm mode. The setting order is ALARM1 > ALARM2 > ALERT > Exit.
• In “ALERT” mode, press MODE button to turn on/off ALERT. The alert icon will appear or disappear. Use the UP and DOWN button to set the required rainfall alert value.
• The rainfall alert refers to 24-hour rainfall alert, not affected by other modes.
• The rainfall alert will sound for 5 seconds every minute, until the conditions for stopping the alert are met, the alert will stop. Pressing any key will stop the rainfall alert beeping. The alert icon flash until the data of the alert rainfall is cleared or the alert function is turned off.
• During the rainfall alert, if the alarm sounds, the rainfall alert will be suspended and will continue after the alarm is over; entering the SNZ mode does not affect the rainfall alert.

Temperatue and humidity

Temperature

• Indoor temperature -9.9°C ~ 50°C (49.82°F ~ 122°F), display LL.L when below -9.9°C and display HH.H when higher than 50°C.
• Outdoor temperature -40°C ~ 60°C (-104°F ~ 140°F)
• Temperature resolution: 0.1°C

Humidity

• Indoor humidity range: 20%-95%, display 20% when below 20% and display 95% when higher than 95%.
• Humidity resolution: 1 %RH
• When alarm rings, temperature and humidity test will be stopped.

Note:

Accuracy

• Indoor temperature accuracy:
  0°C – -40°C: + 1°C
  -9.9°С ~ 0°С, 40°C ~ 50°C : + 1.5°C
• Outdoor temperature accuracy:
  -40°C ~ 0°C, +40°C ~ +60°C: ‡ 2°C
  0°C ~ 40°C : + 1°C

Setting the Temperature Units:
To switch the temperature unit between °C and °F, press and hold the MODE button for 3 seconds, the BEEP will flash, press the Mode button, the temperature units will flash. Press the UP and DOWN button to select °C or °F.

Remote sensor transmission:

• Power the wireless rain gauge, outdoor sensor and the display by installing new batteries, the data will be automatically transmitted.

Notes:

• Place the wireless rain gauge away from equipment that generates magnetic fields such as mobile phones, televisions etc.
• In case of no receipt of the signal, “–” will be displayed on the screen. Press and hold the DOWN button for 3 seconds to receive RF signal.

Rainfall function operation

• In standard mode, press RAIN button to enter rainfall display mode. The setting order is NOW > HOUR > DAY > WEEK > MONTH > YEAR > TOTAL (Whichever mode you switch to, this mode will always be displayed).
• NOW: The amount of rainfall from the time it started raining to the time it rained f or 30 minutes. The reading will be reset to zero after 30 minutes of no rain. At the start of rain, the raindrop icon will flash until the rain reaches zero, but there will be no sound. The icon flashes dynamically until the rainfall has now dropped to zero.
• HOUR: The amount of rainfall in the current hour, for example, it starts at 5:50, and the data will be the amount of the rainfall of the time after 6:00. A total of 24hours. Press the UP button to view -1 ~ -24 hours in the past, hourly rainfall records.
• DAY: The amount of rainfall of the current day (0:00-23:59), press the UP button to view -1 ~ -31days in the past, the daily rainfall record.
• WEEK: The amount of rainfall from Sunday to Saturday.press the UP button to view -1 ~ -52 weeks in the past, the weekly rainfall record.
• MONTH:The amount of rainfall of the current month, press the UP button to view -1 ~ -12 months in the past, the monthly rainfall records.
• YEAR: The amount of rainfall of the current year.Press the UP button to view -1 ~ -5 years in the past, the annual total rainfall record.
• TOTAL: The total amount of rainfall since the product is powered on.

Outdoor temperature and rainfall reception:

• After power-on, the product will automatically enter RF reception to detect temperature and humidity. (This process will last for 3 minutes.) It will exit RF reception immediately after successful reception of outdoor temperature, humidity and rainfall.

• The data of temperature and rainfall will be displayed within 3-minute RF reception after being disconnected for 1 hour.If the signal is still not received, “–.-” will be displayed, and the original ,
  the RF reception will still be turned on for 3 minutes every hour.

• If the receiver does not receive a signal within 3 minutes after power-on, it will not automatically receive the signal unless it is powered on again, reset or manually forced to receive.

• In the normal time display mode, press and hold the DOWN button for 5 seconds to start RF reception, and the RF icon will flash. If no signal is received, the icon will be displayed.

• The RF reception interval is 57 seconds.

Care and maintenance

Placement of the Device
Proper placement of both the display unit and the outdoor sensor are critical to the accuracy and performance of this product.

Display unit placement
Place the display unit in a dry area free of dirt and dust. The display unit is suitable for use on the desktop/countertop.

Important Placement Guidelines

• Display unit and outdoor sensor must be within 150 ft. (50m) of each other.
• To maximize wireless range, place units away from large metallic items, thick walls, metal surfaces, or other objects that may limit wireless communication.
• To prevent wireless interference, place both units at least 3ft (1 m) away from electronic devices (TV, computer, microwave, radio, etc.

Week display;

TROUBLESHOOTING

No wireless sensor or rain gauge reception

| If the wireless signal indicator shows no bars:

•  Relocate the display and/or the rain gauge.

The units must be within 200 ft (60 m) of each other.

•  Make sure both units are placed at least 3 feet(.9 m) away from electronics that may interfere with

the wireless communication (such as TVs, microwaves,computers, etc).

•  Use standard alkaline batteries (or lithium batteries in sensor when temperature is below -4ºF/-20ºC). Do not use heavy duty or recharge- able batteries.

NOTE: It may take a few minutes for display and sensor to synchronize after batteries are replaced.

Display screen not working| •  Check if the batteries are installed correctly or if the battery power is sufficient.

Outdoor temperature and/or humidity flashing or showing dashes

| Flashing of the outdoor temperature and/or humidity is generally an indication of wireless interference.

1.  Bring the rain gauge and display indoors.

2.  Reinstall the battery in the rain gauge.

3.  Reinstall the battery in the display.

4.  Place the units within a couple feet of each other for a few minutes to gain a strong connection.

Can the rain gauge

remain outdoors in freezing temperatures?

| No, the rain gauge should be brought indoors when there is a possibili- ty of freezing temperatures.When the surrounding environment reaches freezing temperature, water vapor will enter the interior of the equip- ment, causing it to malfunction. And the freezing temperature may also cause crack the plastic casing of the rain gauge.

Made In China
Web: www.geevon.com
E-mail:support@geevon.com
Prolinx GmbH
REP
Brehmstr.56,40239 Duessldorf
Germany
Prolinx Global LTD
UK
REP
27 Old Gloucester Stree
London, WC1N 3AX, UK

Manufacture: Fuzhou Smartwell Electronics Technology Co., Ltd
Address: Room 19, Building G3, Sunshine Plaza, Cangshan,Fuzhou, Fujian, China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>