amika hair 2.0 Blow Dryer Brush Instruction Manual
- June 4, 2024
- amika
Table of Contents
hair 2.0
Blow Dryer Brush
Instruction Manual
Important Safety Precautions
When using electrical appliances, especially when children are present, basic
safety precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING. KEEP AWAY FROM WATER.
DANGER
As with most electrical appliances, electrical parts are electrically live
even when the switch is off. To reduce the risk of death by electric shock:
- Always unplug it immediately after using it.
- Do not use it while bathing.
- Do not place or store appliances where they can fall or be pulled into a tub or sink.
- Do not place in or drop into water or other liquid.
- If an appliance falls into water, unplug it immediately. Do not reach into the water.
- Do not use it if the plug is loose in the outlet, as there may be a risk of fire, electric shock, electrical shortage, and burning.
- The appliance should not be operated with wet hands.
POSSIBLE ELECTRIC SHOCK
WARNING: Do not use this appliance near bathtubs, showers, basins, or
other vessels containing water.
WARNING: To reduce the risk of burns, electrocution, fire, or injury to persons:
- Store out of reach of children in a safe dry location. Allow the appliance to cool before storing.
- An appliance should never be left unattended when plugged in.
- Close supervision is necessary when this appliance is used by, on, or near children or individuals.
- Use this appliance only for its intended use. Do not use attachments not recommended by the manufacturer.
- Do not jerk or strain the cord at plug connections.
- Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged, or dropped into water. Return the appliance to a service center for examination and repair.
- Keep the cord away from heated surfaces. Do not wrap the cord around the appliance.
- Never block the air openings of the appliance or place it on a soft surface such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
- Keep heated surfaces clean and free from dust, dirt, and hair spray. If cleaning becomes necessary, disconnect the appliance from the power source and wipe the exterior with a damp cloth.
- Never use it while sleeping.
- Never drop or insert any object into any opening or hose.
- Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
- Do not direct hot air towards the eyes or other heat-sensitive areas.
- Attachments may be hot during use. Allow them to cool before handling.
- Do not place the appliance on any surface while it is operating.
- While using the appliance, keep your hair away from the air inlets.
- Do not use an extension cord with this appliance.
- Do not touch the hot surfaces of the appliances. Use the handles or knobs.
SAVE THESE INSTRUCTIONS
Operating Instructions – the US only
- This appliance is intended for household use.
- Use on Alternate Current (60 Hertz) only.
- Before storing in a safe, dry location, allow the appliance to cool.
- This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
CHECK ALSO EVERY TIME YOU USE THIS HAIR DRYER:
Allow the appliance to cool before storing. When not in use, disconnect the
appliance and store it in a safe, dry location. Keep out of the reach of
children. Do not wrap the cord around the appliance. Fold the cord in the same
way as it was first delivered in its packaging.
- Plug in the hair dryer and press the test button on the plug.
- A hair dryer will stop working. There will be an audible click and the reset button will pop out.
- To reset ALCI with a Reset button: Unplug the unit. Then push the Reset button in, and reinsert the plug into an outlet.
- Be sure to repeat the test every time you use this hair dryer to confirm the ALCI is operational.
- If ALCI is not functioning properly, return the hair dryer to a service center.
- If a water immersion occurs, bring this unit into a service center. Do not try to reset.
Should the dryer go off and the Reset button pop out during use, this could
indicate a malfunction in the dryer. Remove the plug from the outlet and allow
the dryer to cool.
Reset the ALCI. Reinsert the plug into the outlet. The dryer should function
normally. If not, return it to a service center for examination and repair.
Maintenance Instructions
- This appliance is virtually maintenance-free. It contains no serviceable parts.
- Keep free of dust and dirt by wiping with a dry cloth when unplugged and cool.
- Before storing in a safe, dry location, allow the appliance to cool.
- Do not wrap the cord around the appliance. If the cord becomes twisted, untwist prior to use.
- Do not attempt to repair the appliance.
- This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
- Do not attempt to defeat this safety feature.
STORAGE:
Allow the appliance to cool before storing. When not in use, disconnect the
appliance and store it in a safe, dry location. Keep out of the reach of
children. Do not wrap the
cord around the appliance. Fold the cord in the same way as it was first
delivered in its packaging.
Ground Fault Circuit Interrupters (GFCI) – the US only
IF YOU MUST USE YOUR HAIR DRYER IN THE BATHROOM, INSTALL A GFCI NOW!
Your local electrician can help you decide which type is best for you—a
portable unit that plugs into the electrical outlet or a permanent unit
installed by your electrician. The
National Electrical Code now requires GFCIs in the bathrooms, garages, and
outdoor outlets of all new homes.
WHY DO YOU NEED A GFCI?
Electricity and water don’t mix. If your hair dryer falls into water while
it’s plugged in, the electric shock can kill you…even if the switch is “off.”
A regular fuse or circuit breaker won’t protect you under these circumstances.
A GFCI offers you far greater protection. A GFCI can save your life! Compared
to that, the price is small!
Don’t wait… install one now!
***** GFCI is a sensitive device that reacts immediately to a small electric
current leak by stopping the electricity flow.
US & CA|
---|---
EU|
UK|
hair 2.0 blow dryer brush
Efficiency, meet beauty. The style-maximizing design of the hair 2.0 blow dryer brush combines the best features of a round brush and blow dryer to create the perfect, bouncy blowout. Its tourmaline-coated barrel generates negative ions to defy frizz, while its tapered curve creates high volume at the root and sleekness along the shaft. Made with two types of bristles for less breakage, pulling and snarling resulting in a voluminous and shiny look, all with less complication. A range of heat and speed settings deliver even more customized styling. High temperature and speed are ideal for thick and coarse hair, medium temperature and low speed are best for fine hair and detail work, and low temperature with high speed gives any type of hair a sleek finish.
- 3 adjustable heat/speed settings create volume and smoothness on every type of hair.
- Tourmaline-coated barrel generates negative ions and far-infrared heat to smooth hair and minimize frizz.
- The oval barrel is designed to deliver extra root lift and increase overall volume.
- Long nylon ball tip bristles detangle and are smooth.
- Short bristles increase bounce, shine, and polish.
- 9ft/3m swivel cord won’t tangle or trip you up.
- 1.16Ib/530-gram design with a DC Motor makes styling strain-free.
- US: 60Hz/1000W/125V
- EU/UK: 50Hz/1000W/220-240V
- 1000 Watts delivers all the power you need with maximum efficiency.
Directions
To turn it on, rotate the temperature control dial clockwise to the desired
setting.
| = Low heat, High speed
---|---
| = Medium heat, Low speed
| = High heat, High speed
****www.loveamika.com
info@loveamika.com
@amika