thermaltake Core P3TG PRO Case User Manual
- June 3, 2024
- thermaltake
Table of Contents
thermaltake Core P3TG PRO Case
Specification
| Case Type | Mid Tower |
|---|---|
| Dimension (HWD) | 535 x 268 x 500 mm (21.06 x 10.55 x 19.69 inch) |
| Side Panel | Tempered Glass x 1 |
| Material | SPCC |
| Cooling System | – |
| Drive Bays | 2 x 3.5” or 3 x 2.5” |
4 x 3.5” or 5 x 2.5” (With HDD bracket)
Expansion Slots| 8 (Rotatable Patented Design)
** Motherboards| 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX),
2” x 9.6” (ATX), 12” x 10.5” (E-ATX)
I/O Port| USB 3.2 (Gen 2) Type C x 1, USB 3.0 x 2, HD Audio x 1
PSU| Standard PS2 PSU (optional)
Fan Support| Right (M/B Side): 3 x 120 mm, 2 x 120 mm, 1 x 120 mm
3 x 140 mm, 2 x 140 mm, 1 x 140 mm
Bracket (Front or Top): 3 x 120 mm, 2 x 120 mm, 1 x 120 mm 3 x 140 mm, 2
x 140 mm, 1 x 140 mm
Radiator Support| Right (M/B Side): 1 x 360 mm, 1 x 240 mm, 1 x 120 mm
1 x 420 mm, 1 x 280 mm, 1 x 140 mm Bracket (Front or Top):** 1 x 360 mm, 1 x
240 mm, 1 x 120 mm
1 x 420 mm, 1 x 280 mm, 1 x 140 mm
Clearance| CPU cooler height limitation: 180mm
VGA length limitation: 330mm (With Reservoir)
450mm (Without Reservoir) PSU length limitation: 200mm
Accessory
| Figure | Part Name | Q ` ty | Use For |
|---|---|---|---|
| Screw-off #6-32 x 6 mm | 11 | Motherboard | |
| Screw #6-32 x 6 mm | **** |
32
| PSU / PSU Brackets / HDD Bracket / Vertical VGA Bracket / PCI-e Bracket /
Pump Bracket
| Screw #6-32 x 6 mm| 2| Stand-off Pole #6-32
| Net setter| | Motherboard Stand-off
| Cable Ties| 10| Cable Management
| Buzzer| 1| Motherboard Alarm
| Screw M3 x 6.5 mm| 20| 2.5” SSD
| HDD Rubber|
16
| 3.5”/ 2.5” HDD/SSD
| Rubber M5|
4
| Tempered Glass Panel
| Rubber M5 x 1.5|
4
| Tempered Glass Panel
| Rubber Foot| ****
4
| Horizontal Case Placement
**| Stand – off Pole #6 – 32| 1| Vertical VGA Bracket
| Screw #5 x 10 mm| 12| Fans
**| Screw #6-32 x 6 mm| 30| Motherboard/ 3.5” HDD/ Riser Cable
| ****
Thumb Screw #6-32 x 6 mm
| ****
5
| ****
Riser Cable Bracket/ VGA Holder
| Screw M4 x 10 mm| 2| Foot for Vertical Case Placement
| Screw #6-32 x 10 mm| 4| Rubber Feet for Horizontal Case Placement
| | |
Warning and Notice
