EDGEWOOD EBSK-S Wireless Earbuds and Speaker User Manual

2-IN-1 WIRELESS

EARBUDS & SPEAKER

USER MANUAL

Product specifications:

• BT: 5.0

• Support: L2CAP/A2DP(AVCTP/AVDTP/ AVRCP), can receive AUDIO signal and control the AUDIO device. support HSP/ HFP(Handsfree profile), Built-in Mic for hands-free phone call

• Working distance: 10M

• SNR: ≥95db

• Battery: 3.7V 500mAh

• Normal volume playing time: 1H

• Speaker driver: Ø 52 mm

• Power: 3Ω/5W

• Frequency response: 120 Hz-20KHz

• Unit size: L98W98H38mm

• Unit weight: 0.43 lb/0.196 kg

• Charging: 5V/500mA

• Earbuds BT ID: D051448
  Earbuds FCC ID. 2AANZEBSK-E

• Speaker BT ID: D046366
  Speaker FCC ID. 2AANZEBSK-S

Product Feature:

1. Built-in Low-freq radiators, Super dynamic low-frequency sound pressure gain, listening transparent and flexible.
2. International advanced BT chip and circuit design techniques, support all BT device; play music after pairing with BT device. for example mobile/MID/TV, the working distance is more than 10M.
3. With Mic for hands-free phone call function.
4. Built-in MP3 decoding, can directly play TF card, U disk, mobile and other USB storage devices stored MP3 format music files.
5. Build-in the FM radio module, convenient to auto scan and save radio channels.
6. Support AUX IN audio input
7. Support TWS
8. Case can support power for earbud

key & slot function:

1                                       2

3                                         4

5                    6                  7                   8

1. AUX: it can play audio via 3.5mm AUX cable to audio device
2. USB slot: it can decode and play MP3 format audio when put USB card into the slot
3. TF slot: it can decode and play MP3 format audio when put TF card into the slot
4. DC 5V charging slot: use the standard mini USB TYPE-C charging cable for power charging.
5. Power switch/Switch mode long press for “on/off”. When play music (USB card/ TF card/FM/BT), press short to switch USB/TF/FM/BT. (switch to “line in” if via AUX cable to audio device).
6. When play music, press short for last song, press long to turn down the volume.
7. When play music (USB card/ TF card/LINE IN/BT), press short for “play/pause”. under BT mode with mobile paired, when coming call, press short to answer a call, press again to hand up. (in FM mode, press short to search station automatically, press again to stop searching). Keep the TWS speaker under BT mode without pairing, long press the “play/pause” key for 4 seconds either of the speaker until hear a hint and meantime the button light stop flashing, now is in TWS mode, then can paire the mobile.
8. When play music, press short for next song, press long to turn up the volume.

Note: Under FM mode, put in the AUX cable to get better FM radio station

1. Indicator light
2. Touch button

• Technical parameters

1. BT version: V5.0
2. RF transmit: class 2
3. Transmission Range(HZ): 2.402GHZ-2.480GHZ
4. Transmission distance: 10M
5. Working Voltage: 3.0V-4.2V
6. MIC sensitivity: -42dB
7. Frequency (HZ): 50HZ-20KHZ
8. Support profile: HFP, A2DP, AVRCP
9. Standby time: about 120 hours
10. playing time: 4-5 hours
11. Talking time: 4 hours
12. SNR: >95dB
13. Battery capacity: the earphone [40mAh]

• Power on/off
  Power on when pick out the BT earphone from the charging case. Power off and start charging when put the BT earphone back to the case.

• BT Pairing
  Earbuds will turn on automatically and connected with another one, when it with voice prompt “power on “, and the device will be pairing mode when “connected” prompt tone with the LED indicator flashes red and blue.
  Note: You have 3mins to paired with your device, or the devices will close the pairing mode. Put them in the case to wake them back up.
  Turn on the BT on your device, go to BT menu, select for [TG], pair and connect. You will hear “Connected” when pairing is complete.
  Note: The left and right earbud may also be used as a mono earbud.

• Best fit & Best sound
  Try all the ear tips to find the best fit and the best sound. The fit is right when you get a complete seal the ear tips feel comfortable, and you get the best quality and loudest sound.

• function keys
  1. Long press the key 5 seconds to power on or power off.
  2. No connection status: double-click to pairing the left and right devices.
  3. The connection status: short press the key to play / pause, double-click the left one will switch to the previous music, double-click the right one will switch to the next music, Three-click to startup SIRI.
  4. hands-free call: short press the key to answer/hand-up calls, long press the key 2 seconds to reject the coming call.

• Charge the earbuds
  Put the earbuds into the case. The earbud indicator light is red when it is charging, the red light goes out when it is fully charged!

• Safety instructions for use
  To avoid hearing damage, keep the Volume at a moderate level. Avoid listening to music at loud volume levels for prolonged periods of time as this may cause permanent hearing damage or hearing loss. Do one use earbuds when it is unsafe todo so. For example, while operating a vehicle, cycling, crossing a road, or any activity which requires your attention and ability to hear.
  Note: if you are watching video while using your earbuds, your audio may be slightly out of sync with your device.
  Please disconnect the USB cable after charging finish, to avoid the device be charging in a long time.

• FCC STATEMENT

NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guaran-tee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>