ETi C011784XXX Ceiling Lamp Instruction Manual
- June 26, 2024
- eti
Table of Contents
ETi C011784XXX Ceiling Lamp
Product Information
Specifications
- Dimension: 330*64.5mm
- Lamp plate : SPCC+PC+PP
- Samsung LED-2835
Product Features
Product Characteristics
This flush mount ceiling lamp allows customization of the motion sensor hold time with settings of 2min, 10min, or disabled.
A toggle switch on the middle of the fixture is used to select the hold time before activating the fixture.
Specifications
Item/Parameter | Value |
---|---|
Rated Power/W | 21W |
Rated Input Voltage/V | AC120V |
Light Distribution
Lumen Output : 1300lm
Illuminance at 1.5m : 80 Lux
CCT: 3000K/4000K/5000K + 2000K
Product Usage Instructions
Installation Instructions
- Open the diffusion cover of the lamp.
- Connect wires: Black to black, white to white, green to green.
- Fix the lighting fixtures.
- Install diffusion cover.
- Restore power to the electrical box and turn on the light switch to activate the fixture.
Maintenance Instructions
- Do not use volatile solvents such as alcohol to clean the troffer.
- Use a soft cotton cloth with suds for cleaning.
- Do not attempt to disassemble or repair the troffer if not a professional.
FAQ
- Q: How do I customize the motion sensor hold time?
- A: Use the toggle switch on the middle of the fixture to select from 2min, 10min, or disable settings before activating the fixture.
Product Name : ceiling lamp
Model No.: C011784XXX
Product Introduction
Product Description
- Dimension: Ф330*64.5mm
- Lamp plate :SPCC+PC+PP;
- Samsung LED‐2835
Product schematic diagram
Product Features
Product characteristics
- a. Long lifetime (above 50,000hrs), 8 times of lifetime of fluorescent lamp:
- b. High efficiency, energy saving, environmentally friendly (A 21W led lamp can replace a 100 w electric incandescent lamp , saving 80% of energy )
- c. Impact resistant, shock resistant, no UV and IR radiation: high conversion rate and adaptability to severe environments, universal application to offices,hotel , supermarkets,school and libraries,etc
- d. Green Initiative, no harmful gas is emitted, low heat is generated while used, safe and reliable .
- e. Authentic and pure light colour, no flicker, protecting your eyes while providing better visual enjoyment.
Specification
Sensor Description
This flush mount allows you to customize the hold time of the motion sensor
using 3 settings: 2min, 10min, and Disable.
Move the toggle switch on the middle of the fixture to make your selection
before activating the fixture
Installation Instructions
Open the diffusion cover of the lamp, as shown in the diagram;
a; Connect the black wire on the lamp to the black wire on the socket box
b, Connect the white wire on the lamp to the white wire on the socket box
C. Connect the green wire on the lamp to the green wire on the socket box
Fixed lighting fixtures
Install diffusion cover
- Restore power to the electrical box.
- Turn the light switch on to activate the fixture.
Maintenance instruction
Do Not use volatile solvents such as alcohol to clean the troffer.
Use a soft cotton cloth with suds to clean the troffer.
Non-professionals Do not attempt to take apart and repair the troffer.
FCC statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
- Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co‐located or operating
in conjunction with any other antenna or transmitter.
This device must operate with a minimum distance of 20 cm between the radiator
and user body.
Environment requirement
Operating temperature :-20~25℃; Storage temperature :-40~60℃。
The product carried standard UL-1598 UL-8750
Documents / Resources
| ETi
C011784XXX Ceiling
Lamp
[pdf] Instruction Manual
C011784XXX Ceiling Lamp, C011784XXX, Ceiling Lamp, Lamp
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>