Geevon SWV-02 Bluetooth Sprinkler Timer User Manual
- June 14, 2024
- Geevon
Table of Contents
SWV-02 Bluetooth Sprinkler Timer
User Manual
Product Overview
- Product Appearance
Product Specifications
| Working Pressure | 0.5bar-8bar (7.25 psi-116 psi) |
|---|---|
| Flow Rate | 1.3Gal/Min-9.2Gal/Min (5L/Min-35L/Min) |
| Working Temperature | 37~122℉（ 3~50 ℃） |
| Waterproof | IP54 |
| Inlet | NH(US) for 3/4″faucet/hose BSP (EU) for 1″or 3/4″ faucet/hose |
| Outlet | For 3/4″ standard garden hose |
| Battery Status | Voltage ＞2.8V:100% 2.6V<Voltage<2.8V:50% 2.4V<Voltage<2.6V:10% |
(low battery) Voltage<2.4V:0%
Bluetooth Type| BLE 4.2
Battery Life| ≥12 months
Transmission Distance| ≥60m
Main Function
- Set and check irrigation schedule through smart phone APP, connecting with Bluetooth water timer or Bluetooth-WIFI hub.
- Manually ON/OFF the water timer.
- With 2 schedule types: Normal Schedule, and Cycle & Soak mode.
- Max 10 plans in each schedule type.
- Weather delay 24/48/72 hours.
- Irrigation history track to avoid operation error.
- Low power indicator.
- Set non-irrigation time according to local water restriction policy.
- Built-in filter of inlet.
Installations
-
Download the Geevon Life App
Scan the QR code and download the free Android or IOS app, then install the APP.
Follow the prompts to register account or log in with an existing account. If you have already installed the Geodon Life APP, go to step 2.
https://a.smart321.com/zxypzxyp
-
Power the Bluetooth Water Timer
Remove the back case pull out battery cover of Bluetooth water timer and load 2xAA batteries (not included). Press and hold the button until the green LED flashes rapidly, which means the devices is ready to connect.
-
Add a Device
Launch APP, tap “ ” button on the top right corner, or tap “Add Device” directly, the App will search for nearby device, tap “Add” when the devices are discovered. Then follow the instructions on the App page to complete pairing.
Press the “Add ” button on the right of the found device and
tap “Done” button after connection finished.
Once the connection is complete, the
paired devices will be shown on the home page.
Click the Bluetooth Water Timer and get into main page of the device.
-
Basic information of Home Screen
Press the button on the top right corner to enter device information page.
Click the Smart Watering Timer to enter the device details pages. This page displays the following information: date, battery status, device status, weather information, irrigation time, last run timer, next run time.
At the bottom, there is an operation panel with several options: Remote Control, Weather Delay, Timer Schedule, Events Tracking, None Irrigation Setting.
Remote control button for
instant watering.
Weather delay for 24/48/72hours.
Schedule Setting with normal schedule and cycle & soak schedule for options.
Irrigation history for irrigation events track and avoid false operation.
To set no-irrigation time. Once this setting is done and enabled, the smart watering timer will skip the preset irrigation schedule. -
Manual Operation
Manual mode: Click the “ ” to manually turn ON the water timer to start watering. The default time is 10 mins.
Click the “ ” to manually turn off water timer.
Tap the central circle to set manual watering time, from 1min to 24 hours.
-
Weather Delay
Tap the “Weather Delay” to enable the rain delay function. The weather delay can set with 24H,48H,72H and cancel.
- Schedule and settings
Click and choose the schedule type you need and confirm the watering start time, duration, weekdays to water, and save all settings.
The soak & Cycle type have different setting options. It needs to set the start time, end time of irrigation, the cycle duration and soak duration.
- Schedule and settings
Schedule Type
On the schedule page, after select button, there are two types for selection:
Normal type and Cycle & Soak type.
Normal Schedule: means device watering at a particular period in a day.
a. Select Start Time: when you want the device to start watering.
b. Select Irrigation Duration: how long you want to irrigate.
c. Select Weekdays: which days you want to water.
Cycle & Soak: means the
device will run the watering schedule repeatedly in this period.
a. Select Start Time for the time you want the device to start watering and
select End Time to stop watering.
b. Select days of the week to decide which day or days you want watering.
c. Cycle Duration: Determine how long to water.
d. Soak Duration: Set the pause time.*Tips**
a. The minimum period cannot be greater than the total time period.
b. There will be time conflict notice when the time schedule overlap, causing plans fail of setting.
c. When all plans are set up, they will be displayed on the timer list. There is shortcut button behind each group of plans to quick start or stop the plan directly.
Irrigation History
Every irrigation plan will be recorded. It’s convenient for users to track the implementation of irrigation plans.
Non-irrigation time setting
Once this setting is done and enabled, the smart watering timer will skip the
preset irrigation schedule.
Timer Reset & Restore
Press and hold the ON/OFF button of the Bluetooth water timer more than 5
seconds. LED light will fast blink in Green light, the water timer is now in
pairing mode, and reconnect to your smart device. All preset settings are
still saved.
Press and hold the ON/OFF button of the Bluetooth water timer for more than 10
seconds after re-install batteries. The LED light type from blink to stay on
for 3 seconds. The device will be restored to the factory setting, and all
data will be wiped out. Now try to add the water timer device via App again.
Warranty & Warnings
- Please make sure the smart phone is near the Bluetooth water timer when connecting or setting the watering plan. The best range for connection and operation is within 60 meters in the open area.
- The watering timer will follow and perform the preset watering schedule after application set successfully, even if the phone is out of the best connecting range.
TECHNICAL SUPPORT
Please contact us [email protected]