ELMAG WIN TIG DC 180 M Professional TIG DC Welding Inverter Owner’s Manual

ELMAG WIN TIG DC 180 M Professional TIG DC Welding Inverter

TECHNICAL FACTS

PROFESSIONAL TIG DC WELDING INVERTER ‘PFC’ CEBORA WIN TIG ‘DC’ 180 M PLUG PLAY-SET

including 20 lt. argon steel cylinder consisting of:
1 pc. welding inv. WIN TIG DC 180 M
Art. no.: 56903
1 pc. Tig hose p. SR 26/4 m
Art. no.: 55920
1 pc. pressure reducer for steel cyl.
Art. no.: 54122
1 pc. earth cable complete
25 sqmm, 3 m, plug 35/50
Art. no.: 55282
1 pc. Multi Safe Vario “PREMIUM-TC”
Art. no.: 58380
1 pc. steel cylinder ARGON
20 l / 200 bar, filled with UN 1006 argon, compressed, Class 2, ADR *Carriage without exceeding the exemption limits specified in subsection 1.1.3.6., art. no. 54242

APPLY NOW FOR UP TO 24 MONTHS WARRANTY!

Simply register at https://welding.cebora.it/de/assistance/register-your- product within 15 days of purchase.

CEBORA serial no.:
Article Number: 00336
EAN Code: 9004853003363

Now included for a short time free of charge:

59140 | 5-finger welding gloves WELDAS 10-1004 XL 00082 | TIG wear parts set 12 pcs. SR 18/26

PRODUCT HIGHLIGHTS

1. Ignition type selection
   • MMA electric manual welding
   • LIFT TIG – gentle contact ignition without HF
   • TIG HF – High frequency
2. Operating mode selection
   • TIG 4-STROKE – automatic/long seams
   • TIG 2-STROKE – manual operation/short seams
3. Welding current controller
4. SLOPE DOWN: current reduction time controller
5. POST GAS: gas post-flow time controller
6. Operating/temperature control lamp
7. Minus pole socket
   • TIG: torch connection
   • MMA rutile electrodes: torch connection
8. Plus pole socket
   • TIG: earth connection
   • MMA rutile electrodes: earth connection
   • MMA base electrodes: torch connection
9. 10-pin connection for hose package / optional remote control
10. Inert gas connection

WIN TIG DC 180 M – Carbora high-end welding inverter

The WIN TIG DC 180 M inverter offers advanced functions for TIG welding of steel, stainless steel, copper etc. & is an ideal entry-level unit for precision welding with non-contact high-frequency ignition. Optional up-down hose package or foot pedal available.

Thanks to the latest PFC technology, even more energy-saving and resistant to current fluctuations +15%/-20%. Also ideal for construction sites & generator operation (min. 8 kVA).

Possible applications

• Production, repair & assembly companies
• Pipeline construction
• Metal, railing construction
• Machinery, plant & container construction
• Service & customer service

Materials

• Steel
• CrNi
• Copper

Included in the set

• WIN TIG DC 180 M
• TIG hose package SR 26 HF
• Earth cable
• Pressure regulator
• Filled steel cylinder
• Automatic welding helmet

SPECIFICATIONS

SPECIFICATIONS

welding electrodes diameter| min: 1.6 / max: 3.2 mm
welding current setting| WIG 5-180 / MMA 10-140 A
100 % welding power source (10 min at 40 °C) at welding current|

WIG 110 / MMA 95 A

welding power source (10 min. at 40 °C) at welding current| WIG 135 / MMA 115 A
welding power source (10 min at 40 °C) at welding current| TIG 35/180 / MMA 30/140 % / A
Open circuit voltage| WIG 99 / MMA 75 V
voltage / phases| 230 / 1 V / ~
Mains frequency| 50 Hz
power tolerance| +15 / -20 %
anti-surge fuse| 16 AT
thermal overload protection| Yes
insulation class| H
Degree of protection (IP)| 23 S
input power l1 max. / l1 eff.| WIG 17/10 / MMA 20/12,5 A
ground connection plug / cross-section| 13 / 25 O / mm2
connector| Schuck 16 A
Width| 171 mm
Depth| 420 mm
Height| 340 mm
Weight| 10.3 kg

START UP SERVICE – ELMAG – QUALITY

Including ELMAG8 -Quality Check

Including ELMAG8 -Quality Check

• DE preservation, degreasing and de-securing
• Assembly until ready for use
• Oil filling of gearboxes, oil baths and central lubrication systems
• Testing of electrics, safety components and devices
• Test run on all shift and power levels
• 30-minute test run at the highest power level
• Checking and, if necessary, adjustment of machine tolerances,
• e.g. V-belt tension and spindle concentricity
• Testing of all machine functions

For lathes, in addition:

• Lathe chuck reassembly with marking of minimum tolerance
• Measurement of the spindle nose to tolerance< 0.01 mm
• Measurement of the lathe chuck
• Setting the tailstock parallelism

For MIG/MAG/MMA/WIG welding, plasma cutting & induction heating equipment (depending on the type of equipment)

• Assembly of the unit, chassis assembly
• Intermediate hose assembly
• Mains plug assembly and gas hose assembly
• Connection preparation for gas or compressed air
• Contra I cable plug Assembly on hose assembly
• Installation & activation of water cooling unit for modular systems
• Filling with cooling liquid for liquid-cooled units
• Short test run or test welding

COMPRESSED AIR TECHNOLOGY
WELDING TECHNOLOGY
METAL WORKING
STONE CUTTING TECHNOLOGY
WORKSHOP TECHNOLOGY
POWER GENERATORS

References

• Registrieren Sie Ihr Produkt und verlängern Sie die Garantiezeit von 12 auf 24 Monate! — Deutsch

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>