imperii Power Outlet with 2 USB Instruction Manual
- June 7, 2024
- imperii electronics
Table of Contents
imperii Power Outlet with 2 USB
Notice:
- The product need Professional electrician to install.
- The Above picture only show the dimension of the stent is 86 MM, there are other size of stent and different types module for your choose. The way of install and remove are the same
Installation Instruction
This product should be installed by professional electrician
- Unscrew the shell screw, take off the shell
- Unscrew the null line, live line, ground wire three connection screw.
- Connected corresponding line to the terminal.
- Tighten the mounting screws.
- Assemble the shell according picture, tighten screw.
NOTE
-
To ensure the correct use of this product, only professional electricians can install or remove.
-
When install or remove, must disconnect the main power supply.
-
Please according to the electrical installation procedures, correct
selection of product rated current of the voltage, make the product can be used in rated working conditions. -
Do not be used in short circuit or overload conditions, otherwise it will breakdown.
-
Do not be used in a serious damp environment.
-
To ensure safety, please read the instructions carefully before usage.
EU Socket
Product Size: 454539 mm
Installation Size: 45,2*45,2mm
Faceplate Material: PC
Way of installation: Concealed installation
Copper: QSnS.6-0.1 H62
Specification:
Rated Current: 16A
Rated Voltage: 220-2S0V 50/60HZ
Mechanical Lifetime: > 5000
Heat-Resistant: 100 /1 h
Insulation Resistance: 25M
Damp Resistance: 48>5M
Temperature Raise: <45K
Earthing Provision: <0.05M
Electric Strength: 2000V-1 Min
TECHNICAL SERVICE :http://imperiielectronics.com/index.php?controller=contact
imperii Power Outlet with 2 USB Instruction Manual – Download
[optimized]
imperii Power Outlet with 2 USB Instruction Manual –
Download
imperii Power Outlet with 2 USB Instruction Manual – OCR
PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>