Hoggar HOFN 2.3m2 Metal Shed Sky User Manual
- June 12, 2024
- Hoggar
Table of Contents
Hoggar HOFN 2.3m2 Metal Shed Sky
Dearest customer:
Thank you for choosing one of our products
Product Information
The product is a shed designed for storage purposes. It is made with high- quality materials and undergoes strict quality controls and standards. The shed is intended to be assembled by two people and the assembly process can take between 2 and 3 hours. The product should be installed on a level and firm base, such as a wooden platform, flat cement floor, or cemented brick or block. It is important to fix the shed to the ground for stability. The shed should be located in a place sheltered from the wind and with good drainage. It is recommended to avoid placing it very close to areas with trees to prevent branches and leaves from falling on it. Regular cleaning of the shed is necessary, and snow should be removed from the metal shed after each snowfall. It is important to note that the shed is only intended for storing objects, and residence or other effects are prohibited.
Product Usage Instructions
- Ensure you have all the necessary parts for assembly and remove the protective plastic before starting.
- Assemble the shed with the help of another person.
- Follow the instruction manual step by step for correct assembly.
- Choose a dry and windless day for installation to avoid product damage or personal injury.
- Install the shed on a level and firm base, such as a wooden platform, flat cement floor, or cemented brick or block.
- Fix the shed to the ground using appropriate screws or anchorage parts (not included).
- If making a cement base, ensure it leans towards the edges to prevent water ingress.
- Do not concentrate your body weight on the ceiling.
- Regularly clean the shed with a soft damp cloth. Avoid using abrasive solutions or detergents.
- Maintain clean shed drains to prevent dirt accumulation on the roof.
- Contact customer service in case of any inconvenience or issues with the purchased product.
Please refer to the back cover of the instruction manual for customer service contact details.
PARTS
BEFORE YOU START YOU SHOULD KNOW
- We advise you to carefully follow this instruction manual step by step for a correct assembly of the product.
- Make sure you have all the necessary parts for assembly and remove the protective plastic before starting to assemble.
- Do not assemble the shed near children or pets.
- Plan to install the product on a dry, windless day. Avoid assembly on adverse weather days to avoid product damage or personal injury. The shed is not designed to be built directly on the lawn.
- Mounting on a level, firm base of wood, a flat cement floor, or cemented brick or block is recommended. It is very important to fix the shed to the ground. It does not include screws or other necessary parts for its anchorage.
- If a cement base is made, it is important to lean towards the edges to prevent water ingress
- The product should be located in a place sheltered from the wind and with good drainage.
- Avoid placing it very close to areas with trees, since it will be necessary to regularly clean branches and leaves that may fall.
- We recommend removing snow from the metal shed after each snowfall.
- You should never focus your body weight on the ceiling.
- It is recommended for its correct conservation to keep the house clean with a soft cloth and to keep the door track clean for its correct sliding.
- The sheds are only intended to store objects, residence or other effects are prohibited.
TOOLS NEEDED FOR ASSEMBLY
CLEANING AND MAINTENANCE
- It is recommended for its correct conservation to keep the product clean, its cleaning can be done with a soft damp cloth.
- Never use abrasive solutions or detergents on the product.
- It is important to always keep the shed drains clean so that dirt does not accumulate on the roof.
WARRANTY
This shed is made with the highest quality materials and under strict quality controls and standards. In the event of any inconvenience in the purchased product, please contact customer service by phone and email, which are described on the back cover of this instruction manual. The guarantee is valid from the date of purchase that appears on the ticket or invoice, which must be presented to use the guarantee. The warranty period for this product is 10 years against any inconvenience or failure resulting from a structural defect or discoloration.
THE WARRANTY IS EXCLUDED:
- Non conformity with transportation. It must be communicated to the transport agency within the period indicated on the delivery note once the product is received.
- Breakage, damage caused by inclement weather such as strong winds, hail, floods etc …
- The bad assembly, incorrect use and consequences derived from it.
- Non-maintenance and wear parts such as shock absorbers, cylinder, handle and hinges
- The plastic pieces.
- Cleaning or maintenance with abrasive products.
- Damage due to corrosion in parts or sheets in intermittent areas, indirectly damaged areas or due to being exposed to marine areas with salinity causing corrosion. Damage due to corrosion on parts edges or corners is excluded from the guarantee.
- Discoloration caused by the passage of time.
- Scratches in the paint.
- Knocks or dents in the sheet metal.
- Failure to present the invoice or sales ticket and failure to notify in due time and form.
- The costs generated by the treatment of defective or damaged parts, as well as the responsibility for indirect damages that may occur.
- Commercial use or for a purpose other than personal or domestic.
- Modifications, paintings or assembly not carried out in accordance with the law of guarantees and explanations of the instruction manual, as well as the damages caused by exceeding the storage capacity of the product.
ASSEMBLY
DIMENSION
OKORU GLOBAL S.L. // Pol. Ind. Barros nº 29. 39408 Barros. Cantabria – España
(+34) 942 842 170 · info@okoru.es // MADE IN P.R.C.
hoggargarden.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>