Westinghouse PWEXT Extension Wand for Pressure Washers User Manual

June 1, 2024
Westinghouse

User ManualWestinghouse PWEXT Extension Wand for Pressure
Washers PWEXT
PRESSURE WASHER EXTENSION WAND

PWEXT Extension Wand for Pressure Washers

DO NOT RETURN THIS PRODUCT TO THE STORE
If you have questions or need assistance, please call customer service at 855-944-3571.

INTRODUCTION

WARNING
This product and other substances that may become airborne from its use may contain chemicals, including lead, known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands after handling. For more information go to www.P65warnings.ca.gov.
DISCLAIMERS
All information, illustrations, and specifications in this man-ual were in effect at the time of publishing. The illustrations used in this manual are intended as representative reference views only. We reserve the right to make any specification or design change without notice.
ALL RIGHTS RESERVED
All rights reserved. No reproduction allowed in any form without written permission from Westinghouse Outdoor Power Equipment.
DANGER
Read this manual before using or performing maintenance on this product. Failure to follow the instructions and safety precautions in this manual can result in serious injury or death.

UPDATES
The latest User Manual for your Westinghouse products can be found under our support tab. wpowereq.com/pages/manuals Or scan the following QR code with your smartphone camera to be directed to the link.

https://westinghouseoutdoorpower.com/pages/manuals

PRODUCT REGISTRATION
For trouble-free warranty coverage, it is important to register your Westinghouse product.

https://westinghouseoutdoorpower.com/pages/warranty-registration

You can register by:

  • Completing and mailing the product registration card included in the carton.

  • Registering your product on-line at: wpowereq.com/pages/warranty-registration

  • Scanning the above QR code with your smartphone camera to be directed to the mobile registration link.
    For Your Records
    Date of Purchase:
    Model Number:
    Place of Purchase:

  • Sending the following product information to:
    Westinghouse Outdoor Power
    Warranty registration
    777 Manor Park Drive
    Columbus, OH 43228
    IMPORTANT: Keep your purchase receipt for trouble-free warranty coverage.

APPLICATIONS

  • The extension spray wand is a heavy-duty system that positions the extension pole at the desired length for cleaning.
  • Wand length is adjustable from 6 to 9 feet
  • Two lance segments and the ergonomic trigger gun seg-ment offer two extension lengths
  • The nozzle holder accepts standard quick couple-spray nozzles 1/4 in. quick connection.

WARNING
NEVER spray directly at a person, animal, electrical device, or the unit itself. Failure to heed this warning could result in serious injury, electric shock, or death.

  • The spray gun inlet is 3/8 Quick Plug and the package also includes two types of M22 male screw type brass fittings.

SPECIFICATIONS
Length…………………………………………………………..6 to 9 ft.
Material ………………. Alluminum alloy, Engineering plastics
Maximum pressure ……………………………1800 to 4000 PSI
Outlet …………………………………… 1/4 in. Quick Connection
Inlet……………………………………………………..M22 – 14 Male

NOTICE
Thank you for choosing Westinghouse!
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY REASON.
If you have a question or experience a problem with your Westinghouse purchase, call us at 1-855-944-3571 to speak with an agent.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
HAVE QUESTIONS?
Email us at service@wpowereq.com
or call 1-855-944-3571

SAFETY

SAFETY DEFINITIONS
The words DANGER, WARNING, CAUTION, and NOTICE are used throughout this manual to highlight important information. Make sure that the meanings of this safety information is known to all who operate, perform maintenance on, or are near the pressure washer.
** This safety alert symbol appears with most safety statements. It means at- tention, become alert, your safety is involved! Please read and abide by the message that follows the safety alerts symbol.
DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious in-jury.
WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION Indicates a hazardous situation which, if not avoided, could result in minor or moder-ate injury.
NOTICE
Indicates a situation which can cause damage to the pressure washer, personal property, and/or the environment, or cause the equipment to operate improperly.
NOTE:** Indicates a procedure, practice or condition that should be followed for the pressure washer to function in the manner intended.

SAFETY SYMBOLS
Follow all safety information contained in this user’s manual as well as the information on the product labeling.

SYMBOL DESCRIPTION
Safety Alert Symbol
Risk of Injection.
Double-insulated construction
Electric Shock
Risk of Explosion. Never spray flammable liquids. Flammable liquids and

their vapors can be explosive.
| Do Not Operate in Wet Conditions
| Read Manufacturer’s Instructions
| Kickback.
| Wear eye and ear protection

IMPORTANT SAFETY INFORMATION

PERSONAL SAFETY
WARNING Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use the tool while you are tired or under the influence of drugs, alcohol, or medication. A mo-ment of inattention while operating the tool may result in serious personal injury.
WARNING Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing and gloves away from moving parts.
Loose clothes, jewelry, or long hair can be caught in moving parts. Air vents on the tool often cover moving parts and should be avoided.
WARNING Wear the proper personal pro-tective equipment when necessary. Use a ANSI Z87.1 compliant safety goggles (not safety glasses) with side shields, or when needed, a face shield. Use a dust mask in dusty work conditions. Also use non-skid safe-ty shoes, hardhat, gloves, dust collection systems, and hearing protection when appropriate. This applies to all persons in the work area.
WARNING Do not over reach. Keep proper footing in balance at all times.

WAND USE AND CARE
CAUTION Do not force the product. Prod-ucts are safer and do a better job when used in the manner for which they are designed. Plan your work, and use the correct product for the job.
CAUTION Check for damaged parts before each use. Carefully check that the wand will operate properly and perform its intended function. Replace damaged or worn parts immediately. Never operate the preduct with a damaged part.
CAUTION Do not use a product with a mal-functioning switch. Any power tool that cannot be con-trolled with the power switch is dangerous and must be repaired by an authorized service representative before using.

  • Disconnect the power/air supply from the produt and place the switch in the locked or off position before making any adjustments, changing accessories, or storing the tool.
    Such preventative safety measures reduce the risk of starting the tool accidentally.

  • Store the product when it is not in use. Store it in a dry, secure place out of the reach of children.

  • Inspect the tool for good working condition prior to storage and before re-use.

  • Keep guards in place and in working order. Never operate the product without the guards in place. Do not leave the tool running unattended.

PACKAGING CONTENTS

Westinghouse PWEXT Extension Wand for Pressure Washers -
PACKAGING

ASSEMBLY

WARNING Be sure to use thread seal tape on fitting threads.
All accessories require some final assembly. To complete the assembly, attach the fittings as illustrated below.
REMOVING CARTON CONTENTS
WARNING
This product requires assembly.
Do not attempt to operate this product if any of the in-cluded items in the Packaging Contents are already assembled when you remove the carton contents.
These items are not assembled by the manufactur-er and should require customer assembly. Using an improperly assembled product can be hazardous and could result in serious personal injury.

  • Inspect the carton contents. Verify that all the items in the INCLUDED LIST are present and undamaged.
  • Recycle or dispose of the packaging materials properly.

INCLUDED LIST
Extension Spray Wand, 30 Degree Angle Wand, Gutter Cleaner Attachment, 5 Spray Nozzle Tips, Thread Seal Tape, User Manual
If any parts are missing, contact our service team at service@wpowereq.com or call 1-855-944-3571.Westinghouse PWEXT
Extension Wand for Pressure Washers - ASSEMBLY

OPERATION

WARNING Never use near power lines.
WARNING Never extend or retract the wand while spraying or while under pressure. Stop the equipment and relieve the pressure before making any adjustments to the wand.
WARNING Never change nozzles or acces-sories while under pressure. Stop the equipment and relieve pressure before making any changes.
WARNING Never use while on ladders or scaffolding.
WARNING Never use with unapproved ac-cessories.
WARNING Never exceed rated pressure or volume.
WARNING Never use high-pressure to clean persons or animals.
WARNING Never remove or alter warning labels or identification tags.
WARNING Never use wand if damaged.
WARNING Always read, understand, and follow instructions.
WARNING Always maintain proper ballance and control of extension wand.

BEFORE EACH USE

  • Read, understand, and follow ALL safety guidelines and operation instructions prior to use.
  • DO NOT bypass, disable, or remove the trigger gun.
  • DO NOT use pliers, pipe wrenches, etc., to tighten. HAND TIGHTEN ONLY!

CAUTION Caution must be used when the wand is extended as the reaction force of the nozzle spraying will cause the wand to flex. Make absolute-ly certain that there are no power lines or sources of electrical power within 10 feet of the lance at any time.
WARNING Be sure all fittings are tight.
WARNING Do not use wand in the vicinity of a power line. Contact with power transmission lines can cause fatal electrocution!
CAUTION Do not extend or retract your wand while spraying or while under pressure. Stop the equipment and relieve any pressure before making adjustments to the extension wand or changing nozzles.
TO USE THE WAND
Connect the outlet of your pressure washer to the inlet port of the trigger gun of the wand using appropriate fittings rated to handle high pressure. The wand may be used with one or two lance segments. Make sure there is a nozzle in the wand outlet before using.
TO BEGIN SPRAYING
Start the pressure washer. Raise the wand and keep the nozzle at least ten feet away from the surface to be cleaned.
Squeeze the trigger to begin spraying. Maintain stable footing, and move the wand in to the surface to be cleaned.
CAUTION In cases of emergency, do not re-lease the trigger near any surfaces.

TO STOP SPRAYING
Before releasing the trigger gun, move the nozzle at least ten feet away from the surface being cleaned and make sure you have solid footing. The wand will rebound when the trigger is released or if pressure is lost. When you are clear of the work surface and in a safe area, release the trigger.
CAUTION USE EXTREME CAUTION when working on or near fragile surfaces as there may be enough force to damage surfaces or break windows. Keep clear of power lines.
AFTER EACH USE
WARNING Relieve pressure before discon- necting gun from pump hose.

  • Clear the wand of water, fully retract and store in a safe place.

MAINTENANCE

WARNING Relieve pressure before perform-ing any maintenance on gun or wand.

  • Maintain the product by adopting a program of consci-entious repair and maintenance. It is recommended that the general condition of any tool be examined before it is used. Keep your wand in good repair. Keep handles, dry, clean and free from oil and grease.

TROUBLESHOOTING

WARNING Work in a clean, uncluttered area.

PROBLEM POSSIBLE CAUSE CORRECTION
The gun leaks. The fitting of the inlet is not tight. Use thread seal tape

on inlet.
Over-pressurization| Check that the pressure washer’s PSI doesn’t exceed the manufacturer’s specifications.
The lance segment leaks.| The connection is not tight.| Tighten the lance segment.
Unit won’t spray.| Unit is clogged.| Reverse flush the unit with water.
Not connected to a nozzle.| Connect an appropriate nozzle.

NOTE: Be sure to use enough thread seal tape on inlet fitting threads.
and Westinghouse are trademarks of Westinghouse Electric Corporation.
Used under license by Westinghouse Outdoor Power Equipment.
© 2023 MWE Investments, LLC All Rights Reserved.

www.WestinghouseOutdoorPower.com
Service Hotline 855-944-3571
777 Manor Park Drive, Columbus, OH 43228
PWEXTMANUAL 11/22/23
PWEXT Rev 02

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Westinghouse User Manuals

Related Manuals