DELL P5524Q Display Control User Guide

DELL P5524Q Display Control

Copyright © 2023 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.

Product Information

Specifications

• Product Name: Dell P5524Q
• Product Type: Display Control
• Model Number: Rev. A00

Product Usage Instructions

Dell Display Control
Find the monitor’s IP address from OSD menu (Others->IP Address).

Open a web browser and enter the monitor’s IP address (e.g. http://10.0.50.100) in the address bar. The Home page opens and click Crestron for the control interface.

The Main window  as shown below is  displayed.

You can open a window by clicking the corresponding tab at the top right of the window.

Finding the Monitor’s IP Address

1. Press the OSD menu button on the monitor.
2. Navigate to Others -> IP Address.
3. Note down the IP address displayed on the screen.

Accessing the Control Interface

1. Open a web browser.
2. Enter the monitor’s IP address (e.g. http://10.0.50.100) in the address bar.
3. Press Enter.
4. The Home page will open.
5. Click on “Crestron” for the control interface.

Main Window

The Main window is displayed and provides basic controls for the monitor.

1. Click on the desired button to perform the following actions:
   • Power: Turns the power on/off
   • Vol -/ Vol +: Adjusts the volume settings
   • Mute: Toggles Mute on/off
   • Sources List: Switches the input channel
   • Contrast/Brightness/Sharpness: Adjusts the respective settings
   • Menu/Enter/Exit Menu: Perform corresponding operations

You can operate the basic controls of the monitor on this screen.

• Click a button and operate as follows.

• Sources List

You can click a button to switch the input channel. The cursor will move according to the currently selected input port.

• Click a button and operate as follows. To show the hidden buttons, click the icons if applicable at the left and right ends.

• Click the button and operate in the same way as the remote control.

Tools Window

Configures the settings between the monitor and Crestron® control system. Click the [Exit] button to return to the Main window.
The Tools window provides additional configuration options for the Dell P5524Q monitor.

Crestron Control:
Configures the settings of Crestron® control system devices

• IP Address: Configures the IP address of the control system
• IP ID Port: Configures the IP ID and port number used for communication
• Click the [Send] button to apply the settings

To apply the settings, click the [Send] button.

Monitor:
Configures the monitor settings.

• Monitor Name: Configures the name of the monitor  The length of the Monitor Name can be up to 22 alphanumeric characters.
• Location: Specifies the location of the monitor Configures the location name of the monitor. You can specify a Location name up to 22 alphanumeric characters.
• Assigned To: Assigns the monitor to a specific user or room Configures the user name for the monitor. You can specify a user name up to 22 alphanumeric characters.

The usable symbols are space and the following: !”#$%&’()*+,-./:;<=>?@[\]^_`{|}~ To apply the settings, click the [Send] button.

Network Setting
Configures the network settings of the monitor.

To apply the settings, click the [Send] button.

User Password
Configures the User Password. To prompt the entry of User Password before starting Display control, select the checkbox.

alphanumeric characters. The usable symbols are space and the following: !”#$%&’()*+,-./:;<=> @[\]^_`{|}~
Confirm| Re-enter the above password for verification. If the password is incorrect, an error message is displayed.

To apply the settings, click the [Send] button.

Admin Password
Configures the Admin Password. To prompt the entry of Admin Password before displaying the Tools window, select the checkbox.

alphanumeric characters. The usable symbols are space and the following: !”#$%&’()*+,-./:;<=>?@[\]^_`{|}~
Confirm| Re-enter the above password for verification. If the password is incorrect, an error message is displayed.

To apply the settings, click the [Send] button.

Info window

Displays the settings and status of the monitor. Click the [Exit] button to return to the Main window.

Monitor Information

Monitor Status

NOTE: Monitor Name, Location and the user name for Assigned To may appear truncated if they are too long.

Help Desk window

Sends/receives messages to/from the administrator for Crestron RoomView® Express.

Emergency Alert

When the administrator for Crestron RoomView® Express sends out an alert message, it will be displayed on the screen.

FAQ (Frequently Asked Questions)

1. Q: How do I find the monitor’s IP address?
   A: Press the OSD menu button on the monitor, navigate to Others -> IP Address, and note down the displayed IP address.

2. Q: How do I access the control interface?
   A: Open a web browser, enter the monitor’s IP address (e.g. http://10.0.50.100) in the address bar, and press Enter. Click on “Crestron” for the control interface.

3. Q: What can I control from the Main window?
   A: The Main window allows you to control power, volume, input sources, contrast/brightness/sharpness settings, and perform menu operations.

4. Q: What options are available in the Tools window?
   A: The Tools window provides options for configuring the control system’s IP address, IP ID, port number, monitor name, location, and assigned user/room.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>