PRO-4 1800 Lumen Flashlight Instruction Manual
- June 6, 2024
- PRO-4
Table of Contents
PRO-4 1800 Lumen Flashlight
Instructions
• Installing 9 AA Batteries
• Turning ON / OFF – Switching-Modes
• Zoom In / Out
• Maintenance
• Warnings
• Troubleshooting
Installing 9 AA Batteries
- Unscrew tail cap. Remove battery pack
- Insert 9 AA batteries according to polarity (+/-) as indicated on battery pack
- Insert battery pack into flashlight. Replace tail cap
FRESH ALKALINE BATTERIES ARE STRONGLY RECOMMENDED. DO NOT MIX OLD AND NEW, OR DIFFERENT TYPES OF BATTERIES
Turning ON / OFF – Switching Modes
To turn flashlight ON / OFF, firmly press the ON / OFF button. You will hear a
“click,” and the light will turn ON. Firmly press again, and the flashlight
will turn OFF.
Note: The next time the button is pressed, the light will advance to the
next mode.
To cycle through light modes (without turning the flashlight off), press button in halfway. The button will not click, and the light will advance to the next mode.
5 LIGHT MODES:
- High Power Light
- Medium Power Light
- Low Power Light
- Flash
- S.O.S.
Auto High Mode: Turn OFF from any mode. Wait 10 seconds. Turn flashlight back ON, and it will automatically turn ON in “High Power Light” mode.
Zoom In / Out
-
Zoom In
For a long, narrow, focused light beam, push Flashlight head to the front end of Flashlight, as shown -
Zoom Out
For a broader light beam, push Flashlight head toward the back end of the Flashlight, as shown
Maintenance
- Remove and store batteries when not in use for 90 days or longer
- Clean Flashlight with a clean, dry cloth as needed
- Lubricate screw threads and moving parts with standard consumer lubricant as needed
Warnings
- High Intensity Beam. Extremely bright 1800 lumen light
- Flashlight should be used for the intended purpose of providing illumination only
- Do not look directly into light; may cause vision damage
- Follow City Ordinance Guidelines for proper disposal of dry cell batteries
- Recommended for Ages 14+
Troubleshooting
If the Flashlight does not turn on; works intermittently; or has a weak light:
- Remove and replace batteries
- Be sure tail cap is screwed on tightly, and batteries are inserted properly in battery pack
- Be sure battery pack is properly inserted. If problem persists, contact Pro-4 Tactical for technical advice
- See www.Pro-4Tactical.com for Warranty and Replacement Information
WARNING: This product can expose you to chemicals including Benzene and Ethylbenzene which are known to the State of California to cause cancer. For more information, go to www.p65Warnings.ca.gov
1 Year Warranty
No Questions Asked!
Pro-4 Tactical will repair or replace your nonworking unit FREE of charge within one year of purchase. To register your Pro-4 Tactical product so it becomes eligible for coverage under our 1-Year, No Questions Asked Warranty, please complete product registration by mail or on our website.
Send warranty slip to: Pro-4 Marketing, 32411 Industrial Drive, Madison
Heights, MI 48071
– OR –
Register your unit online: www.Pro-4Tactical.com/warranty-
registration
Once you have registered your new product, you can make a claim to have your
Pro-4 Tactical item replaced. You MUST send in the following: Proof of
purchase (store receipt), your contact information, a description of the
problem, and your nonworking product.
NOTE: You MUST register your product before requesting service.
Registration must take place within 2 weeks of purchase. You may also complete
registration and send with the above items (within 2 weeks of purchase). If
you do not have a store receipt, indicate where and when you purchased your
product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>