WANTJOIN 8001JX Professional Grade Blender User Manual

WANTJOIN 8001JX Professional Grade Blender User Manual

WARNING

Please follow and read carefully to the following safety notice before

using the product:

1. NEVER unplug by grasping and pulling the flexible cord after using the
2. Wash all parts that may contact food before Please follow the washing instructions in the manual.
3. DO NOT submerge the appliance or place the power cord near any
4. Keep the appliance and its cord out of reach of
5. DO NOT allow the cord to hang over the edges of tables or counters avoid
6. DO NOT allow the unit or cords to contact hot surfaces to avoid
7. CLEAN the device before each time using the
8. ALWAYS use the appliance on a clean, dry, level
9. DO NOT operate the appliance with an empty
10. DO NOT fill containers past the max fill or max liquid
11. DO NOT microwave any containers or accessories with the
12. ENSURE all utensils are removed from containers to avoid damages or

• NEVER operate the appliance without lids and caps in
• DO NOT attempt to defeat the interlock mechanism and install the container and lid

15. NEVER leave the appliance unattended while in
16. The thermal switch will activate and lb Unplug the appliance and allow it to cool for 15 minutes before using again.

HOW TO USE

Load softer, water-dense ingredients on the bottom, and ice or frozen ingredients on top. This creates a vortex in the pitcher that leads to a smoother breakdown of frozen ingredients.

REMIND

For best results, cut ingredients in 2.5 cm chunks. Do not place frozen ingredients first in the pitcher.

FUNCTION FEATURES

bounces back if you release the switch.

Adjusting Button

| ****

Function key, intelligent function selection in the left half circle, and right half circle for manual speed adiustment.

Manual speed control operation

| ****

Before starting, turn the knob to the MIN key to start START. By rotating clockwise, SPEED will go from MIN-MAX to STOP key when the machine is shut down.

REMIND

When the knob is at the STOP button, and pressing START will not turn on the blender

TROUBLESHOOTING

sales team for exhange the blade.

Water leaking

| Broken cup during cold and hot enviroment| Contact the after-sales team to exhange the blade/pc cups.
Broken knife inner bearing
Machine Not Working| Emergency protection activate after blend hard stuff| Switch off and press the reset button after 20 mins

Rough grinding

| Pluse the ice before blending| ****

Follow the correct food adding order and pulse the hard food before blending

Need extra liquid to reduce
Over sized or overload food.
Noisy Machine| Blade is a cosumable goods, must replace when hear werid noise.| Exchange a new blade to avoid machine broken
Machine is smoking| Over sized/overload food leads the moto broken.| Switch off the power and restart after 20 mins.

CLEANING AND MAINTANCE

Cleaning Tips

1. Use 【Pluse】button/plastic knife to clean/blend with water in the cup。
2. Never use hand to clean the cup without taking off the blade。
3. Never put the blender cup to wash in dish
4. Use sponge or dry towel to clean the
5. Never immerse in water to avoid machine damaged.
6. Only use pluse and soap water to clean the

Machine Maintance

1. Place the cup upside down to let the water flow
2. Wash properly to avoid moulding
3. Never blender without things or grinding things to break the blade
4. Must cool down the machine after machine working for a period of

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>