WANTJOIN Insulated Beverage Dispenser Instructions
- June 16, 2024
- Wantjoin
Table of Contents
WANTJOIN Insulated Beverage Dispenser
Product Information
Specifications:
- Insulated layers for keeping beverages warm or cool
- Ability to preheat or precool for extended insulation time
- Heat preservation time is affected by the amount of liquid added
- Cool preservation time is affected by the amount of ice added
- Preservation time is influenced by the temperature of the environment
- A thermometer requires some time to accurately sense temperature changes after adding ice or hot liquid suddenly
Product Usage Instructions
1. Preparing for Use:
Before using the insulation beverage, it is recommended to preheat or precool the container to help extend the insulation time. This can be done by filling it with hot water or cold water, depending on your desired usage.
2. Heat Preservation:
To achieve longer heat preservation time, add more liquid to the container. The insulation layers will work more effectively with a higher liquid volume. Follow the tested parameter reference trend below:
Time | Temperature (°F) | Temperature (°C) |
---|---|---|
1 Hour | 152.8 | 67.1 |
2 Hours | 146.1 | 63.4 |
3 Hours | 138.4 | 59.1 |
4 Hours | 133 | 56.1 |
5 Hours | 129 | 53.9 |
6 Hours | 125 | 51.7 |
7 Hours | 124 | 51.2 |
8 Hours | 122 | 50 |
3. Cool Preservation:
To achieve longer cool preservation time, add more ice to the container. The insulation layers will work more effectively with ahigher ice volume. Follow the tested parameter reference trendbelow:
Time | Temperature (°F) | Temperature (°C) |
---|---|---|
1 Hour | 56.8 | 13.8 |
2 Hours | 58 | 14.4 |
3 Hours | 58.8 | 14.9 |
4 Hours | 59.4 | 15.2 |
5 Hours | 60 | 15.6 |
6 Hours | 61 | 16.1 |
7 Hours | 61.5 | 16.4 |
8 Hours | 62 | 16.7 |
4. Ice Water Preservation
To preserve ice water, it is recommended to use a 1:1 ratio of ice to water in the container. Follow the tested parameter reference trend below:
Time | Temperature (°F) | Temperature (°C) |
---|---|---|
2 Hours | 39.6 | 4.2 |
4 Hours | 40.6 | 4.8 |
8 Hours | 41.1 | 5.1 |
12 Hours | 41.5 | 5.3 |
16 Hours | 42 | 5.6 |
20 Hours | 42.3 | 5.7 |
24 Hours | 46.6 | 8.1 |
28 Hours | 51.4 | 10.8 |
FAQ
1. How should I open the lid of the dispenser?
To open the lid of the dispenser, turn on the tap and let some water out first. This will make it easier to open the lid. Do not fill the dispenser completely with liquid as it may affect the insulation effect.
2. When should I replace the battery?
You should replace the button cell battery when the display panel shows errors or when the data displayed is inaccurate.
- The insulation beverage is physically kept warm by the insulated layers. Any preheating or precooling helps extend the insulation time.
- The more liquid added, the longer the heat preservation time will be.
- The more ice added the longer cool preservation time will be.
- The temperature of the environment will either lengthen or shorten the preservation time.
- The thermometer needs a certain time to sense accurately after adding extra ice or hot liquid suddenly.
- Below is the tested parameter reference trend according to different scenarios
HALF USING PARAMETER
WARNING
- spiral interface of dispenser.
- Turn on the tap and let some water out which will be easier to open lid.
- DO NOT open the lid and fill the dispenser full with the liquid you need to achieve an insulation effect
BATTERY REPLACEMENT
Exchange the button cell battery when the display panel error or inaccurate data.