KEMPER 65330EL Electric Hot Air Generator Instruction Manual

: June 9, 2024
: KEMPER

Table of Contents

SAFETY WARNINGS
DESCRIPTION
MAINTENANCE
TROUBLE SHOOTING:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KEMPER 65330EL Electric Hot Air Generator Instruction Manual

SAFETY WARNINGS

Read the following instruction before use.
Warning: to reduce the risk of fire, keep textiles, curtains, or any other flammable material a minimum distance of 1 m from the air outlet.
Never insert any objects in the opening of the appliance, it may cause fire, electric shock or damage to the appliance.
The safe use of this appliance requires the respect of some basic rules such as: never touch the appliance with wet or damp feet or hands; do not expose the appliance to humidity or water; never expose the appliance to atmospheric conditions; do not pull the power cord or the appliance itself to remove the plug.
When the appliance is not used and before any maintenance operation, the appliance must always be unplugged.
Do not use the appliance in bathroom or in the immediate surroundings of showers, bath-tubs or swimming pools.
If the power cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid any risks.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
This appliance is exclusively designed for indoor uses.
Do not place the appliance directly below a power socket.
Do not use this heater if it has been dropper or if there are visible signs of damage.
Use this heater on a horizontal and stable surface.
This equipment should not be operating without monitoring.
WARNING: some parts of this product can become very hot and cause burn. Particular attention has to be given where children and vulnerable people are present.
WARNING: in order to avoid overheating, never cover the heater.
Warning: do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.

GENERAL WARNINGS

Remove all the packaging material and make sure that the appliance is in good condition. If you have any doubt, do not use the appliance and contact our After-Sales Service. Keep the packaging material (staples, nylon bags, etc.) out of the reach of children. Before turning the appliance on, check that the voltage and frequency of the power socket are compatible with those indicated in the product technical plate.
This appliance must be connected to an approved mains socket that complies with the safety regulations on electrical systems for civil purposes. The electrical system must be specific for the appliance rated voltage and must be equipped with an earth cable.
The appliance must be used only for its intended use, that is, as a heater for domestic heating. Any use other than its intended purpose shall be deemed to be improper and hazardous.
The manufacturer shall not be held responsible for damages derived from misuse of this appliance, do not assuming any responsibility in case of incorrect use that will decline any warranty.
Always place the appliance on a flat and even surface, it should not be exposed to vibration or mechanical stress.
The appliance has dangerous components that must be kept out of the reach of children.
Never connect the power cord to extensions or triple plugs. Do not pull or damage the power cord. Before any maintenance operations, disconnect the plug from the mains socket.
The power cord must never be in contact with the hot surfaces of the appliance.
Do not lay the power cord under a carpet. Pay attention not to place the power cable where it is likely to get into people’s way.
If the appliance does not work properly, immediately turn off the appliance and disconnect it from the mains socket. For repairs, contact a technical support center authorized by the manufacturer, and require that original spare parts be used. Using parts that do not conform to the product may seriously compromise its correct operation. The device must not be opened, processed or modified out by unqualified personnel.

DESCRIPTION

This heater is an electric heater with ventilator/fan motor. It can beused in households, warehouse, workshop or greenhouses. It incorporates a thermostat and a self-resetting thermal cut-out to control the heating elements. The thermostat measures the air temperature in the room and it will switch off the heating element in the heater when the room temperature reaches the set temperature. The self-resetting thermal cut-out will switch off the heater to ensure the safety when overheating. The appliance is also equipped with a practical LED light, controlled by the LED switch. The LED light can be adjusted with a 90° inclination vertically and horizontally. When use the heater for the first time, you may notice a slight smoke. This is normal. The smoke will disappear in a very short period. It is because the heating element is made of stainless steel and is coated with protection oil during the production. The smoke appears because the oil is heated.

INSTRUCTIONS FOR USE

Make sure that the appliance is in good condition and position it so that it stands upright on a firm surface and at a safe distance from wet environments and flammable objects.
After having securely positioned it, plug in the power cord.
During operation, the appliance must be at a minimum distance of 50 cm from walls or other objects. Direct the air flow towards such a point so that room heating is optimized. Do not direct the heat flow towards corners or reduced spaces, or towards the floor or ceiling.
Turn the thermostat knob to the MAX position and let the heater operate with full power.
Turn the power setting knob to the power required: the switch can be set to 4 different positions: Off, Fan, Low heat (2200W) and High heat (3300W).
Wait for the environment to reach the desired temperature.
Slowly turn the thermostat knob until turning off the thermostat, which is indicated through the thermostat tripping.
Once the room reaches the required temperature, heating element will stop working. In this way, the temperature will be automatically adjusted and kept constant along time by the thermostat, which will automatically activate the appliance when the ambient temperature falls below the desired temperature.
Before turn off the appliance, turn the thermostat knob to the MAX position and turn the power setting knob to the “Fan” position and let the appliance cool down for a few minutes.
After cooling down, switch off the appliance by turning the power setting knob to the “O” position.
When the appliance is completely cool, unplug it from the power socket.

USE OF SUMMER VENTILATION MODE
Set the selector to the Summer Ventilation mode to turn the appliance into a practical fan that can also be used during summer.

SAFETY MEASURES
To avoid damages and dangerous situations caused by overheating, the appliance is equipped with a safety device that stops the heating element functioning in case of overheating, for example, due to a total or partial obstruction of the grills. In this case the ventilation for cooling the appliance is maintained. Once cooled, disconnect the appliance from the power outlet and remove the object that is obstructing the grilles. At this point, it is possible to start the appliance again, as described above. The appliance should operate correctly. Should the problem come up again, contact the nearest support centre.

MAINTENANCE

This appliance requires no maintenance except cleaning of its external surface.
Before cleaning the appliance, disconnect it from the mains socket and wait for it to cool down.
Dust the intake grill regularly, removing rope yarn, down or any other foreign matter that might limit regular air circulation.
To clean external surfaces, use only a soft moistened cloth. Do not use solvents.
Be careful not to let the water enter the appliance inner. Don’t splash water onto the heater, never use solvent like gasoline etc.
Don’t splash water onto the heater, never use solvent like gasoline etc. to clean the heater in order to protect the enclosure.
Non gettare la scatola, utilizzarla per conservare l’apparecchio.
Quando non utilizzate l’apparecchio, riponetelo nella sua confezione originale e conservatelo in un luogo asciutto.

TROUBLE SHOOTING:

You can solve many common problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the service Centre.

Problem	Possible cause	Treatment

The heater does not operate, even when it is plugged in and the switch and the thermostat are switched on.| The plug is loose, bad connection| Pull out the plug, check the connection of the plug and socket. Then connect again.
No power in socket outlet| Insert the plug in a proper socket
The heating element glowing| The input voltage is too high or too low| Use power supply according to the rating on the label
| The air inlet grill is blocked| Keep the heater far away from articles like curtain, plastic bag, paper and other things which can cover the air inlet.
---|---|---

The appliance didn’t heat up,or only ventilator worked

| The switch was not put at heating setting.| Turn the switch to heat setting

The thermostat operated

| Turn the thermostat and listen if there is open/close voice. If there is no click and the thermostat is not damaged, the heater will automatic switch on when the appliance cooled down
The self-resetting cut-out operated| Turn the heater off and inspect the blockage of inlet or outlet. Disconnect the plug and wait at least 10 minutes for the protection system to reset before attempting to restart the heater.
Abnormal noise| The appliance is not standing upright| Put the heater on a level surface

INSTRUCTIONS FOR DISPOSAL
Disposal of this product shall be governed by the European ommunity Directive 2012/19/UE on Waste Electrical and lectronic Equipment (WEEE). According to this regulation, the consumer has the obligation NOT to dispose of this product as household waste but through separate channels of collection (WEEE). In the case of purchasing a similar new product, this product can be disposed free of charge from the distributor. The disposal is free, no purchase required, for WEEE small size (external dimensions below 25 cm). Comply with local regulations in the ields of waste disposal. It is always possible to dispose of this product at a WEEE collection center predisposed by the public dministration. The incorrect disposal of this article could have otential adverse effects on the environment and human health. This symbol indicates the consumer’s duty to dispose of this article as WEEE and NOT as household waste. Improper disposal of the product by the consumer involves the application of administrative sanctions provided by law