PHILIPS RS771B Luxspace Accent RPO Adjustable Ceiling Light Instruction Manual
- June 4, 2024
- Philips
Table of Contents
PHILIPS RS771B Luxspace Accent RPO Adjustable Ceiling Light
introduction
Model | Lumen package | Color Temperature [K] |
---|---|---|
RS771B | LED17S | 827/830/840/930/CH/FR |
RS771B/RS781B | LED19S | FMT/ROSE |
RS771B | LED20S | 827/830/840/930/CH/FR/PC930/PW930 |
LED27S | 827/830/840//930/CH/FR/FMT/PW930/PC930/ROSE | |
RS771B/RS781B | LED39S | 827/830/840/930/CH/FR/PW930/PC930 |
LED49S | 827/830/840/930/PW930 | |
RS781B | LED60S | 827/830/840 |
features
Attention
- LUMINAIRES MUST BE INSTALLED OUT OF ARM DISTANCE/HEIGHT!
- THE POTHEAD CAN BE PERCEIVED AS HOT
- ADJUST THE POTHEAD AFTER THE LUMINAIRES IS COOLED DOWN OR USE HEAT-INSULATING GLOVES.
- THE LUMINAIRE SHALL BE INSTALLED BY A QUALIFIED ELECTRICIAN AND WIRED IN ACCORDANCE WITH THE LATEST IEE ELECTRICAL REGULATIONS OR THE NATIONAL REQUIREMENTS.
- CAUTION: RISK OF ELECTRIC SHOCK. THE LIGHT SOURCE CONTAINED IN THIS LUMINAIRE IS NON-USER REPLACEABLE, IT SHALL ONLY BE REPLACED BY THE MANUFACTURER OR HIS SERVICE AGENT OR A SIMILAR QUALIFIED PERSON.
- THE DRIVER SHALL BE ONLY REPLACED BY INSTALLER, THE MANUFACTURER OR HIS SERVICE AGENT OR A SIMILAR QUALIFIED PERSON.
Electric installation
MCB
16A type B
| Driver| Lampfam| CRI or CCT| Opt
---|---|---|---|---
≤84pcs| PSU-E| 17S| |
≤65pcs| PSU-E| 19S| ROSE|
≤65pcs| PSU-E| 20S| |
≤65pcs| PSU-E| 27S| 830,840,827,CH| RPO-M
≤52pcs| PSU-E| 27S| 930,PW930,PC930| RPO-P
≤50pcs| PSU-E| 19S| FMT|
≤50pcs| PSU-E| 27S| 830,840,827,CH| RPO-P
≤50pcs| PSU-E| 27S| 930,PW930,PC930| RPO-M
≤49pcs| PSU-E| 27S| ROSE/FR|
≤49pcs| PSU-E| 39S| 830,840,827,CH|
≤43pcs| PSU-E| 27S| FMT|
≤43pcs| PSU-E| 39S| 930,PW930,PC930| NOT NB/HNB
≤30pcs| PSU-E| 49S| 930,PW930,PC930|
≤31pcs| PSU-E| 60S| |
≤24pcs| PSU-E| 39S| FR|
≤24pcs| PSU-E| 39S| 930,PW930,PC930| NB/HNB
≤24pcs| PSU-E| 49S| 830,840,827,CH|
≤40pcs| PSD-E| | |
≤34pcs| DIA-E| | |
≤27pcs| DIA-VLC-E| 49S/60S| |
≤24pcs| DIA-VLC-E| 17S/19S/20S/27S/39S| |
≤24pcs| WIA-E| | |
over view
Disconnect before servicing
- Luminaire has basic insulation between Low Voltage supply and control conductors.
- The control gear and/or the external flexible cable contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person. The light source contained in this luminaire is not replaceable, in case of damage replace the luminaire.
- Storage, installation, use, operation and maintenance of the products needs to be performed exactly according the instructions in this manual and/or other instructions as may be provided by us to guarantee safe use of the product over its entire lifetime. Failure to adhere to these instructions will invalidate your entitlement to warranty. Bolts with indication of torque strength on the drawing need to be tightened using a calibrated torque wrench. Pre-assembled bolts need to be retightened again to the required torque specification to assure maximum strength over lifetime.
- This product contains a light source of energy efficiency class: see table or label.
©2021 Signify Holding
All rights reserved. Reproduction in whole or in part is prohibited without
the prior written consent of the copyright owner. The information presented in
this document does not form part of any quotation or contract, is believed to
be accurate and reliable and may be changed without notice. No liability will
be accepted by the publisher for any consequence of its use.
Publication thereof does not convey nor imply any license under patent- or
other industrial or intellectual property rights. Signify Holding The
Netherlands
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>