KEMPER 104997 Smart Barbecue

KEMPER 104997 Smart

INSTRUCTIONS FOR THE ASSEMBLY, THE USE, AND THE MAINTENANCE

Important: read carefully the following instructions to familiarize with the appliance before the connection to the gas bottle. Keep these instructions for further consult.

Attention: the use of this appliance produces carbon dioxide emission and its accumulation may be dangerous. This product must be used only outdoors.
To be used ONLY with KEMPER art. 577/577LCL WOODSON butane cartridge, it can be dangerous to try to use any other type cartridges.
THE USE IS PROHIBITED IN DWELLINGS.

Safety information

1.  Use the appliance only outdoors at a safety distance from any heat source, flame or sparks and far from dirt (accumulation) and inflammable material.
2.  Place the hot plate on the ground or on the floor always horizontally. Never put the hot plate on wood or plastic surfaces or on inflammable materials.
3.  Never modify your hot plate and absolutely never disassemble the appliance and its components. Repaitions on the appliance must be made only by qualified personnel.
4.  Check that the appliance is not damaged. Never use a damaged appliance.
5.  Note: This device is intended only for direct cooking of food. It is NOT allowed to use pots.
6.  Do not use the hot plate other purposes than cooking.
7.  Make sure that the seals are in a good state before connecting the gas cartridge (see figure at right).
8.  Never use the appliance with damaged or worn seals.
9.  Never use the appliance if it leaks, is deteriorated or malfunctioning.
10.  Do not let domestic animals near the hot plate.
11.  Never leave the hot plate going and unguarded.
12.  Do not modify the equipment.
13.  Do not place flammable objects less than 1 m from the stove, both above and laterally.
14.  ATTENTION: very high-temperature parts are easily accessible. Keep the appliance away from children.
15.  This appliance is equipped with a cartridge disconnection device in case of overpressure: if the gas pressure in the cartridge exceeds the security level, the device disconnects the cartridge and its connecting lever returns to position “UNLOCK”. In this case, remove the cartridge and let it cool (for example under water) before using it again or using a new cartridge by following instructions mentioned on the “Replacing the cartridge” section. DO NOT force restarting without cooling or replacing the cartridge.

Information on the use of cartridges

1.  Use exclusively KEMPER butane cartridges art. 577/577LCL WOODSUN. It may be dangerous to adapt other gas containers.
2.  All operations of assembly and change of cartridges must be done in well-aired places and far from flames, inflammable materials and other peoples.
3.  Read carefully the instructions on the wrapping of the cartridge before using.
4.  Never try to refill a disposable cartridge.
5.  Remove the cartridge after each use in order to avoid overheating the appliance.
6.  Never expose cartridges at temperatures over 50°C.
7.  Always keep the appliance away from children.
8.  Never breathe in the gas coming from the cartridge or the smoke produced while using the appliance.
9.  Never smoke while handling cartridges.

IN CASE OF LEAKAGE (SMELL OF GAS) BRING YOUR APPLIANCE IMMEDIATELY OUTDOORS, IN A VENTILATED PLACE WITH NO INFLAMABLE SOURCES, AND THERE YOU CAN LOOK FOR LEAK AND STOP IT. IF YOU WANT TO CHECK THE Seal OF YOUR APPLIANCE, DO IT OUTDOORS AND NEVER LOOK FOR A LEAKAGE WITH A FLAME BUT USE SOAPY WATER.

USE INSTRUCTIONS

Starting the appliance

1.  Put the hot plate on a stable and horizontal surface. Do not alongside two or more burners.
2.  Put the hot plate far from inflammables substances or things that could be damaged by heat.
3.  Turn up side down the pot holder plate paying attention that the 90° angles are turned towards the cartridge holder slot (see figure at right).
4.  Make sure that the hot plate tap is CLOSED – Tap on position OFF (clockwise rotation).
5.  Place the lever connecting the cartridge on the “LOCK” position.
6.  Turn anticlockwise all the way the tap until it is positioned on “IGNITION” position; continue the rotation until ignition occurs.
7.  Regulate the flame according to your needs.
8.  Caution: The device is not equipped with a security system for the automatic closing of the gas.

Shutting down the appliance

1.  To turn off the fire, rotate completely clockwise the tap to the “OFF” position.
2.  Position the cartridge-connecting lever on the “UNLOCK” position.
3.  Wait for the plate to cool before storing it.
4.  In case of long periods of non-use of the product, it is compulsory to take the cartridge out of the appliance.
5.  This unit can be kept inside only if the cartridge has been disconnected and removed from the appliance. If you expect that the

Changing the cartridge

1.  Ensure that the cartridge is empty before replacing it (shake it in order to hear the sound produced by the liquid).
2.  Replace the cartridge outside and away from other people.
3.  Ensure that the appliance is switched off before you remove the cartridge.
4.  Make sure that the tap of the hot plate is CLOSED. Tap on OFF position (clockwise rotation).
5.  Check that the cartridge connection lever is on the “UNLOCK” position.
6.  Open the cartridge holder lid and take out the cartridge.
7.  Check that the seals are in a good state of maintenance.
8.  Put the cartridge in its housing placing the cut on the cartridge’s neck in correspondence to the safety stop.
9.  Position the connecting lever on the “LOCK” position.

CLEANING AND MAINTENANCE

Clean your equipment after EVERY USE. Do not use abrasive or flammable detergents, which may damage the components of the unit and may cause a fire. Clean with a solution of warm water and soap.
NEVER USE THE PRODUCTS FOR OVEN CLEANING. CAUTION: All cleaning and maintenance operations, should be made when the unit is cold and after removing the cartridge.

• EXTERNAL SURFACE: wash with a soft cloth and a solution of warm water and soap. Rinse with water. Do not use abrasive cleaners, degreasers or concentrated products for cleaning of barbecues. Use a solution of gentle detergent or baking soda and hot water. In case of stubborn stains, use a non-abrasive detergent powder and then rinse with water.
• BOTTOM OF THE BARBECUE DRIP: the tray should be cleaned after each use in order to prevent the accumulation of grease can ignite causing a flash fire. Remove residuals with a brush, a scraper and/or a sponge and then wash with a solution of water and soap. Rinse with water and let dry.
• PLASTIC SURFACES: wash with a soft cloth and a solution of warm water and soap. Rinse with water. Do not use on plastic surfaces abrasive cleaners, degreasers or concentrated products for barbecue cleaning.
• WIRE RACK: use a mild solution of soap and water. In case of stubborn stains, use a non-abrasive detergent powder and then wash with water. The producer will not answer for damages to things or persons coming from the non-correct use or non-correspondent to these instructions. The guarantee is of two years from the date of purchase of the goods and only in the case in which the product has not tampered, has not been damaged and has not fallen. The product must be accompanied by the buying receipt showing the date of purchase. In case of damages due to an incorrect use of the product, the warranty will not be valid.

References

• Kemper Group

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>