Kemper 58607 ProfiMaster Mobile Welding Fume Extractor Owner’s Manual
- June 1, 2024
- KEMPER
Table of Contents
Kemper 58607 ProfiMaster Mobile Welding Fume Extractor Owner’s Manual
TECHNICAL FACTS
- Robust quality with powerful filter for regular use in the repair or maintenance sector
- 360° rotating and swivelling extraction hood
- Special design of the hood means less tracking of the extraction arm required
- Increased safety through acoustic filter monitoring
- W3/IFA-tested
- Two-stage filter (filter surface approx. 17 m2)
- Push handle and cable holder
- Safe operation due to rotary field detection
- Convenient filter change due to maintenance door
- Suction arm 4 m in pipe version
- Can optionally be equipped with automatic start/stop function
PRODUCT HIGHLIGHTS
General selection criteria as guidance for your application
Approval adequate for standard welding fumes (without carcinogenic substances)
Austria: W3/IFA approval
Germany: W3/IFA approval
Required approval for carcinogenic substances (e.g. welding fumes from
stainless steel or brass welding work)
Austria : H13 AT edition (particulate filter according to GKV 2011, § 15)
Germany: W3/IFA approval
You will find the filter class of this extraction system under “Technical facts” below
SPECIFICATIONS
Filter area| 17 m2
Connection| 400 V
fan power| 1800 m3/h
suction power with arm| 1100 m3/h
motor power| 1100 W
Noise level (peak)| 70 dB(A)
suction tube-Ø| 150 mm
measurements without arm| 780x730x950 mm
arm length| 4 m
Weight| 106 kg
