Westinghouse WKHBEP01WH Simple Life Hand Blender Instruction Manual

Westinghouse WKHBEP01WH Simple Life Hand Blender

Product Information

Specifications:

• Model: WKHBEP01WH
• Review: 12/23
• Intended Use: Immersion Hand Blender
• Usage: Home use only, not for commercial use

Product Usage Instructions

Important Safeguards:

1. Read all instructions carefully before using the immersion hand blender.
2. Avoid use by physically impaired individuals or those lacking relevant experience.
3. Keep out of reach of children.
4. Check voltage compatibility before connecting to power supply.
5. Avoid damage to plug, power cord, or product.
6. Do not submerge power cord in water.
7. Avoid letting cord hang over edges or touch hot surfaces.
8. Unplug if appliance malfunctions during use.
9. Do not immerse main body in water.
10. Use appliance for intended purpose only as described in the manual.
11. Allow product to cool before cleaning.
12. Handle and clean blades with care as they are sharp.

Using Your Immersion Hand Blender:

1. Insert attachment first before plugging cord into outlet.000000000000
2. To disconnect, switch off the appliance, then remove the plug from the wall outlet.
3.  Unplug the appliance from the power supply when leaving it unattended.
4. Do not immerse the main body in water to prevent electrical shock.
5. Use the appliance indoors only, not intended for outdoor use.

Cleaning and Maintenance:

Quick Cleaning: Wipe the blender with a damp cloth after each use. Do not immerse in water.

Troubleshooting:

If you encounter any issues with the blender, refer to the troubleshooting section in the manual for guidance.

FAQ

Q: Can I use the immersion hand blender for commercial purposes?

A: No, the product is intended for home use only and not for commercial applications.

Q: How should I clean the blades of the blender?

A: Be careful when handling and cleaning the sharp blades. Wipe them gently with a damp cloth and avoid submerging them in water.

Important safeguards

Like any electrical appliance, the Immersion Hand Blender must be handled with care at all times. To ensure your own safety, the following precautions should be followed.

1. BEFORE USING YOUR IMMERSION HAND BLENDER, READ ALL INSTRUCTIONS CAREFULLY.
2. This product is not intended for people (including children) who are physically impaired, have sensory or mental disabilities, or lack relevant experience and knowledge, unless someone responsible for their safety supervises or directs their use of the product.
3. Keep the product and its cables out of the reach of children.
4. The product is intended for home use. It is not intended for commercial use.
5. Please check if the voltage marked on the product matches the local power supply voltage, before connecting the product to the power supply.
6. Keep power cord away from hot surfaces, sharp objects, or open fire.
7. Do not use this product if the plug, power cord, or product is damaged.
8. Do not submerge the power cord in water.
9. Do not let cord hang over the edge of a table or counter, touch hot surfaces, or become knotted, trapped or pinched.
10. Pulling or stumbling over the power cord can result in tilting over or falling of the appliance, causing serious injury.
11. If this appliance begins to malfunction during use, immediately unplug the cord.
12. Always insert the attachment first, then plug cord into the outlet. To disconnect , switch the appliance off , then remove plug from the wall outlet
13. Always unplug the appliance from power supply if you leave it unattended. After use and before cleaning , always switch off the appliance and disconnect it from power supply by taking the power cord connector out of the electric socket.
14. Do not immerse the MAIN BODY in water. To protect against electrical shock, do not immerse the cord, power plug, or appliance in any liquid, do not rinse under the tap.
15. Never use the appliance for any other purpose than what is described in this instruction book.
16. For indoor use only. Not intended for outdoor use.
17. The product must be allowed to cool before cleaning.
18. Be careful when handling and cleaning the blades. They are very sharp.
19. Always turn off the appliance and disconnect it from power socket by pulling the power cord, before doing any of the following: replacing accessories or accessible parts that move during operation, cleaning or maintenance, and assembly and disassembly.
20. If the processed food starts to stick to the appliance (e.g. on BLADE) , switch off the appliance and clean the accessories carefully .
21. Never insert e.g. fingers, fork, knife, spatula, spoon into rotating parts of the appliance or the accessories.
22. Before you remove the appliance or the drive unit from the container, let the rotating parts stop completely.
23. Make sure that your hair, clothes and accessories do not get into close vicinity to the rotating parts.
24. Make sure that the power supply cable does not get between the rotating parts of the accessories.
25. Do not process food at a temperature exceeding (max. temperature 60°C / 140 °F) should not be too hot, as splattering contents may cause scalding.
26. Do not wind the power cord around the appliance, this will reduce its life.
27. This appliance has a polarized plug (one blade is wider than another). To reduce the risk of electric shock, this plug will fit only one way into a polarized outlet. If the plug does not completely fit in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.
28. If the supply cord is damaged it must be replaced by the manufacturer or a authorized service agent or a qualified technician in order to avoid a hazard
29. The appliance cannot be used for chopping ice or blending hard and dry substance , other wise the blade could be blunted.
30. To reduce the risk of injury , never place cutting blade on base without first putting bowl properly in place
31. The use of accessory not recommended by the manufacturer may cause Injuries to persons.
32. Always remove the blade assembly before pouring contents from beaker.
    SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY

PARTS & ACCESSORIES

USING YOUR IMMERSION HAND BLENDER

Before the first use, clean the blender according to the section of “Quick cleaning”.
The maximum operation time should be less than 1 minute each time, and a 30-minute rest time must be maintained after 5 consecutive cycles (one minute of work and one minute of stop is one cycle).
WARNING: Sharp blade on BLENDER STICK! Handle with extreme care.

OPERATING INSTRUCTION FOR BLENDER

1. Align the MAIN BODY with the BLENDER STICK and push the pieces together until you hear and feel them click together. It may be helpful to press the RELEASE BUTTON when assembling.

2. Plug the Power Cord into power outlet.

3. Lower the blender into food.Then press and hold the low speed button or high speed button to start operating.

4. To stop the blender by releasing the low speed button or high speed button.

5. Unplug the Power Cord from the power outlet

6. To remove, press the RELEASE BUTTON and unplug the BLENDER STICK.

CLEANING AND MAINTENANCE

NOTE : Do not immerse the MAIN BODY in water.
NOTE: Do not immerse the detachable stem of the blender in water because overtime the lubrication on the bearings may wash away.

This appliance requires little maintenance. It contains no user serviceable parts. Do not try to repair it yourself. Contact the Customer Service Department for any unusual issues you may experience.

1. Always unplug the Immersion Hand Blender before cleaning.
2. Ensure the Immersion Hand Blender has cooled down before cleaning.
3. Be very careful when cleaning BLENDER STICK blades, the blades are very sharp.
4. To clean MAIN BODY, wipe down with a clean, damp cloth and dry thoroughly after every use. Never submerge in water or other liquids. DO NOT place BLENDER STICK COLLAR in water.
5. Never use harsh chemical detergents, powder or scouring pads on any of the parts.
6. To clean all detachable parts and accessories, wipe with a soft cloth and a mild detergent before rinsing again. Soak in hot water for a few hours for easy cleaning. Then wipe down with a damp cloth and allow to dry.
7. Do not place the Immersion Hand Blender, or any of its attachments in the dishwasher, as this will damage internal components. Do not use abrasive cleaners.
8. Store Immersion Hand Blender in a clean, dry place.
9. Contact Customer Service for any issues or malfunctions.

Quick cleaning
Between processing tasks, hold the hand blender in the beaker half filled with water and turn on for a few seconds.

TROUBLESHOOTING

Check whether the power cord plug position, pressed in place to check whether to send the opening.
The mixing rod and the MAIN BODY can not be assembled.| Check the mixingrod and the MAIN BODY need to be aligned with the silk screen solution position and the knob is in place as required .

DISPOSAL
Proper disposal of this product.
This label indicates that, in the EU, electronic devices cannot be disposed of with regular household waste.
Please use the return or collections systems of your municipality or contact the seller where you purchased this product.

INFORMATION AND SERVICE

If you have question or concerns about your product, please visit our website:

https://info.westinghousehomeware.com/

In line with our policy of continuous product development, we reserve the right to change product, packaging and documentation specifications without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>