EDIFIER QR65 Multimedia Speaker User Guide
- June 1, 2024
- Edifier
Table of Contents
EDIFIER QR65 Multimedia Speaker
Specifications
- Total output power: R/L(Treble): 15W+15W, R/L(Mid-Bass): 20W+20W
- Frequency response: 55Hz-40kHz
- Power input: 100-240V~ 50/60Hz 1.5A
FAQ
Q: Can I connect a subwoofer to the speaker?
A: The subwoofer is not bundled with the speaker. To connect it with a subwoofer, you may need another suitable audio cable.
Q: What is the purpose of the MODE button?
A: The MODE button allows you to switch between different audio input modes such as Bluetooth and Line-In connections.
What’s in the box?
Cable connection
Source selection
Bluetooth connection
USB connection
Play Control
Light effects
Charging
Standby & wake-up
- Total output power: R/L(Treble): 15W+15W, R/L(Mid-Bass): 20W+20W
- Frequency response: 55Hz-40kHz
Note
- Images are for illustrative purposes only and may differ from the actual product.
- The bundled USB connecting cable is for audio streaming only. Do not use it for device charging.
- For the need for technical improvement and system upgrade, the information and specifications contained herein may be slightly different from the actual product. If any difference is found, the actual product prevails.
Note
- Power input: 100-240V~ 50/60Hz 1.5A * This plug type is meant for illustration purposes only.
- The subwoofer is not bundled. To connect it with a subwoofer, another suitable audio cable may be required.
- Power on: Switch the main power button on the rear panel of the active speaker to “ON”.
- Power off: Switch the main power button to “OFF”.
Note
- Pin code for connection is “0000” if needed.
- To enjoy all the Bluetooth functions of this product, make sure that your audio source device supports A2DP and AVRCP profiles.
- If no device is connected in 30 minutes, the speaker will switch to Bluetooth hidden mode. In this mode, (1) new devices cannot find the speaker, but (2) for a device that exists in the pairing record of this speaker, you can select “EDIFIER QR65” from its
- Bluetooth device list to reconnect. To exit from Bluetooth hidden mode, press and hold the ” VOLUME ” button for 1.5 seconds.
- To disconnect from the current Bluetooth device, press and hold the ” VOLUME ” button for 1.5 seconds.
Note
- In USB audio streaming mode, volume sync is not supported. To adjust the volume, adjust on the speaker and your computer separately.
- The following operating systems support USB audio streaming: Windows 11, Windows 10, Windows 8, and Windows 7.
- In LINE IN mode, volume sync is not supported. To adjust the volume, adjust on the speaker and your device separately.
Note
- Power input: 100-240V~ 50/60Hz 1.5A
- During charging, make sure that the power cable is properly connected and the main power button on the rear panel of the active speaker is switched to “ON”.
- To guarantee high-efficiency charging, use a charging cable that supports the charging current of 4.5A or higher.
- To learn more about EDIFIER, please visit www.edifier.com
- For EDIFIER warranty queries, please visit the relevant country page on www.edifier.com and review the section titled Warranty Terms.
- USA and Canada: service@edifier.ca.
- South America: Please visit www.edifier.com (English) or www.edifierla.com (Spanish/Portuguese) for local contact information.
Hereby, Edifier International Limited declares that the radio equipment type
EDF286005 is in compliance with Directive 2014/53/EU.
The full text of the EU Declaration of conformity is available at the
following internet address: https://www.edifier.com/int/eu-doc.html
Declaration for EU
Frequency Band: 2.402GHz ~ 2.480GHz RF Power Output: ≤12 dBm (EIRP) There is
no restriction of use.
FCC ID: Z9G-EDF218 IC: 10004A-EDF218
For more information, please visit our website
EDIFIER ConneX app
CONTACT
- Model: EDF286005
- Edifier International Limited
- P.O. Box 6264
- General Post Office
- Hong Kong
- Tel: +852 2522 6989
- Fax: +852 2522 1989
- www.edifier.com
- © 2023 Edifier International Limited. All rights reserved. Printed in China
NOTICE
For the need for technical improvement and system upgrade, information
contained herein may be subject to change from time to time without prior
notice.
Products of EDIFIER will be customized for different applications. Pictures
and illustrations shown in this manual may be slightly different from the
actual product. If any difference is found, the actual product prevails.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>