MLOVE D5 Outdoor Busking Speaker User Manual

MLOVE D5 Outdoor Busking Speaker

Precautions

• Please read the instructions first.
• Please follow the instructions carefully.
• Please store and use this product at room temperature.
• Do not use this product near heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Do not block the opening of the speaker, and do not insert objects into the vents or slots of the music.
• Do not throw or drop the product to avoid damage. Please charge the speaker with product-rated voltage. ›If the connection line does not match your device, please contact the dealer.
• Please keep the volume(s) of the speaker moderate to avoid temporary or permanent hearing impairment.
• No matter how the equipment is damaged it must be repaired by a qualified technician. Unauthorized disassembly will void the warranty.
• Batteries should be replaced by qualified technicians to avoid dangers associated with improper replacement.
• Do not disassemble, puncture, compress or throw the battery into fire. If swelling occurs, do not continue to use a battery. Do not place batteries in high-temperature environments. Do not use it after the battery is soaked in water.
• Batteries (battery packs) should not be exposed to conditions such as sunshine, fire, or similar excessive heat conditions.
• If a power adapter is used to charge the unit, ensure to use a supporting power adapter that meets the standard requirements.

Package Content

Key Functions Display

1. Master Volume Adjust
   Clockwise rotating the knob to turn up the volume, Counterclockwise rotating the knob to turn down the volume.

2. Input Audio Volume Adjust
   Clockwise rotating the knob to turn up the volume, Counterclockwise rotating the knob to turn down the volume.

3. OTG Volume Adjust
   Clockwise rotating the knob to turn up the live OTG output volume, Counterclockwise rotating the knob to turn down the live OTG output volume.

4. Mic Control: Mic Priority
   Short press the “MIC Control” to turn on or turn off. After the Mic Priority is turned on, the input audio backgroud will decrease automatically when receiving singnal from the microphone, press again to resume.

5. Mic Control: Wireless Mic Pair
   Long press to start UHF connection, the mic icon blinks on the speaker screen, and the icon stays on while connected.

6. Mode
   Short press to switch from Bluetooth mode, Micro SD card mode, USB mode, and AUX external audio source mode. The default mode is Bluetooth mode.

Loop Play
Short press to start single loop playback and it is valid in micro SD card and USB mode. The will flash slowly on the speaker screen while in single loop mode, the icon stays on while single loop mode ending. (Default is all loop.)

Local Record

Short press to start recording, press again to pause the recording and save it.

1. Support Bluetooth or AUX sound recording toMicro SD card /USB.
2. It will record prior to USB while a Micro SD card and USB is used at the same time.
3. The icon will blink while in the recording.
4. , The icon will stay on while in playback.

Key Functions

• EQ sound mode : Short press to switch between Music and Busking EQ mode.

  • Music mode: better mode for music listening M
  • Busking mode: better mode for outdoor busking

• Previous
  Short press: Previous track

• Play/Pause : Short press to play or pause Long press the Play/Pause button to disconnect with the current device. (While a Bluetooth device is connactad

• Next
  Short press: Next track

• Rec Play
  Short press to play the recording file and the @ icon stays on.

• Mute
  Short press the mute button to mute the speaker, and press again to resume.

• Wireless MIC and CH1 wired MIC effect adjustment Microphones can be adjusted separately, Treble / Bass / Reverb/ Gain

• CH2
  CH2 Multi-function channel adjust Gain/Reverberation/Timbre can be adjusted separately

• CH2 channel option
  Acoustic Guitar / Electronic Instrument / Wired Microphone

Screen Display Instructions

Indoor music mode
The frequency response curve is flatter, and the low-frequency diving is more, which is more suitable for indoor listening to music.
Outdoor Busking mode

The middle and high frequencies are more prominent, the human voice and Musical Instruments have stronger penetration and the sound pressure is larger, which is more suitable for outdoor busking and playing.

Ports Instructions

Ports Instructions

1. CH1 Wired MIC input port
   Plug with a 6.35mm wired MIC

2. CH2 / Multi-channel instrument input port
   Plug with XLR/6.35mm Wired MIC/Wooden Guitar
   and other electronic instruments.

3. Micro SD card port
   Insert a Micro SD card into the card slot and the unit
   will automatically play the audio files stored.

4. USB PORT
   Insert a USB into the USB interface and the unit will
   automatically play the audio files stored.

5. AUX input

6. Type-c Live Streaming interface
   Connect to mobile phone for wired Live Streaming (Output 5V-1A Max)

7. Earphonio local music playback and microphone sound.
   Type-c battery charging Can connect to a PD charger to fast-charge.

8. Type-c reverse charging
   External charging for mobile devices (Output max support 5V-1A)

9. LED charging indicator
   Red Led is charging, Green Led is fully charged. Red led is discharging. 3.5mm universal audio input interface for external audio source devices.

Electronic instruments include Digital Wind Instrument, Electronic Organs, Electronic Drum etc.

Bluetooth Connection

1. Turn on the speaker
   Flip the power switch to turn on, the Bluetooth icon on the screen will flash and wait for Bluetooth pairing. The default mode is Bluetooth mode.

2. Connect the device
   Activate the Bluetooth on your device and search for “Mlove Rangers D5”. Once the connection is established, a voice prompt will be heard and the Bluetooth indication light will stay on. When used gain, the speaker will re-connect to the last device automatically once the device’s Bluetooth is activated.

Tips

• Press and hold the button to disconnect current device and set the Mlove Rangers D5 to pairing mode. Short press the button to reconnect last paired device.

Local Recording Function

1. Start to record
   Insert the micro SD card or USB into the speaker, short press the “Local Recording” button, the screen recording icon flashes and the digital time counting starts recording.

2. Save the recording
   During the recording, short press the “Local Recording” button to stop and save the recording.

3. Recording playback
   Short press “Rec Replay” button to play the recording, short press “Rec Replay” again or short press “M” button to exit from playing recording file.

4. Other Instructions

5. Support Bluetooth mode or AUX sound recording to micro SD card/ USB.

6. If a micro SD card and USB inserted at the same time,the recording files will be stored in the USB by default.

7. When recording and playing back, if the USB and micro SD card exist at the same time, the USB recording will be played first.

8. When recording, the system will automatically generate a folder named “REC” in the USB or micro SD card to store the recorded files.

Specifications

FAQ

FCC STATEMENT

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>