INTEX 64701 Fiber Tech Dura Beam Airbed Owner’s Manual

: June 5, 2024
: INTEX

Table of Contents

IMPORTANT SAFETY INSTRUCTIONS
TO INFLATE
TO DEFLATE
IMPORTANT NOTE
MAINTENANCE
STORAGE
Documents / Resources

INTEX 64701 Fiber Tech Dura Beam Airbed Owner’s Manual

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING THIS PRODUCT

WARNING

NEVER PLACE AN INFANT TO SLEEP ON AIR MATTRESSES.
Never introduce any flammable substance into the inflatable airbed, SUCH AS AEROSOL TIRE REPAIR PRODUCTS, as it may ignite or explode.
Only for domestic use. Only for indoor use.
This is not a toy. Children should be supervised to ensure that they do not play with the appliance/airbed.
Do not walk, stand on or jump on or use the airbed as a trampoline.
Do not use on or near water. This is not a raft.
Do not set up bed near stairs, doors, sharp edges or breakable objects. Provide adequate space between bed and objects to avoid entrapment.
Make sure the area is flat, smooth, even and free of sharp objects that could puncture the bed.
Keep pets away from the airbed. Pets may puncture the surface of the bed.
Avoid sleeping on the edge of the airbed. Edges produce less support than the middle of the bed.
Recommended working pressure: 0.025bar (0.36psi). Rated maximum weight capacity: Model 64701 / 64707: 136kg (300Lb); Model 64702 / 64703 / 64708 / 64709: 273kg (600Lb).

FOLLOW THESE RULES AND ALL INSTRUCTIONS TO AVOID SUFFOCATION, PROPERTY DAMAGE OR OTHER INJURY.

TO INFLATE

Make sure the air pump inflation valve insert plug is properly positioned and the 2 in 1 exhaust valve cap is securely tightened.
Pull 2 in 1 valve cap to open.
Insert the nozzle from an air pump into the 2 in 1 inflation valve.
Inflate the product to approximately 80% of desired firmness.
CAUTION: To prevent bursting, do not over inflate or use high pressure air compressor.
Close 2 in 1 valve cap securely after inflation.

TO DEFLATE

Pull out 2 in 1 valve cap.
Pull inflation valve base to release air. CAUTION: When opening, point the exhaust valve away from any person.
Replace inflation valve base and cap securely.

IMPORTANT NOTE

Proper inflation of the airbed.

The ambient temperatures of air have an effect on the airbed internal pressure. At low ambient temperature the air will contract within the airbed and the airbed will feel softer: add air as necessary. At high ambient temperature the air within the airbed will expand significantly and the airbed will become hard and may burst: release air to avoid damage to the airbed or to soften the feel. Do not expose the airbed to extreme temperatures (hot or cold).

Air inside of bed may expand and contract with varying temperature leading to reduce pressure inside of the bed. If this occurs, simply add more air using the pump to achieve desired firmness. If puncture occurs, please refer to instruction.
Repair kit/patch is enclosed.
Stretching is a natural characteristic of new vinyl. During initial use, the airbed may become soft and require additional inflation to maintain desired firmness. This is normal for the first few days of use.
Dimensions shown are approximate and will vary due to the vinyl temperature and the air temperature.

In no event shall Intex, their authorized agents or employees be liable for damages (such as pin holes) to the airbed caused by negligence, ordinary wear and tear, abuse and carelessness, or external forces.

MAINTENANCE

For cleaning use only mild soapy solution. Do not use any chemicals.
In case of repairs, use only common PVC repair glue and patches.

STORAGE

Make sure the airbed is completely deflated, clean and dry.
Lay bed flat with sleeping surface facing upwards and follow the folding steps on Figs (1-5). Fold the airbed loosely and avoid sharp bends, corners and creases which can damage the airbed.

FIG (1)

FIG (2)

FIG (3)

FIG (4)

FIG (5)

Store in a safe, dry and cool place when not in use.

SAVE THESE INSTRUCTIONS

Documents / Resources

| INTEX 64701 Fiber Tech Dura Beam Airbed [pdf] Owner's Manual
64701, 64702, 64703, 64707, 64708, 64709, Fiber Tech Dura Beam Airbed, 64701 Fiber Tech Dura Beam Airbed
---|---