Boxinda B-25 Three in One Wireless Charging User Manual
- June 15, 2024
- Boxinda
Table of Contents
Boxinda B-25 Three in One Wireless Charging User Manual
Foreword
Dear users, thank you for purchasing our products. In order to learn more
about the product.
Please read this manual carefully before use. Have a nice experience.
Product parts and their descriptions
Foldable 4-in-l wireless charger
- Headphone induction area
- Mobile phone sensing area
- Watch induction area
- Ambient light button
- TYPE-C power port
- Apple power port
Ambient light description
According to customer needs, you can freely choose to turn on/off the light.
Use Ambient Temperature Instructions
For normal use, please keep it below the room temperatureof26degrees; when the room temperatureexceeds28degrees, the watch may not be charged. When fully charged, the charging time of the mobile phone will be extended.
How to solve abnormal charging
Please confirm whether your mobile phone has wireless charging function before use; Check if the plonk de,,;Ares from the. ireless inductive charging area of the charger; Whether to use a non-metallic protective case for charging the mobile phone, and the thickness of the protective case is not recommended more than 4 mm; When a metal object in the charging area, the charger will automatically identify and prover off Protect.
When the charger temperature is too high, the protection will be automatically activated. Please unplug the power first, wait for the charger, Return to temperature before use.
Frequently Asked Questions
Why do wireless charging and induction products generate heat when charging? During the charging process, there will be a certain loos of magnetoelectric conversion, and this pert of the loss will be normal tothephone and charger to generate heat.
Suggest:
l’n1en the device is fully charged, please disconnect the charging in time to
avoid long-term <)<:le charging reselling in The product and charger continua
to heat up;.
When the mobile phone is chargin11, ~dose the mobile phone bad<ground soft
autorun software.
Precautions
It can only be used indoors or in a dry environment, avoid placing it in high
temperature, humidity, strong static electricity and
Place or use in the environment of strong magnetic field;
For your safety, please don not plug and unplug electrical appliances whit wet
hands
Keep out of reach of babies and children~
Do not use if the product gets into water or is stuck with dirt or dust;
Non-professionals are not allowed to disassemble and repair without
authorization.
Product parameters
- Model: B-25
- Input: 5V=3A
- Mobile phone output: IOW
- Headphone output: SW
- Watch out ut: 2W
Packing list
Wireless charging stand x 1
TYPE-C Charging Cable x 1
Manual x 1
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The FCC certification of this device refers to RF exposure testing performed
in typical operating conditions, where a person is no closer than 20
centimetres from the device surface at all times, except for non-repetitive
patterns with transient time intervals in the order of a second. Only in the
stated conditions, the device is shown to fully comply with the FCC RF
Exposure requirements of KDB 447498.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>