Ampeg BSE410H Series Bass Cabinets User Guide

: June 1, 2024
: ampeg

Table of Contents

Ampeg BSE410H Series Bass Cabinets
Product Information
Product Usage Instructions
Frequently Asked Questions
IMPORTANT SAFETY INSTRUCTIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Ampeg BSE410H Series Bass Cabinets

Product Information

Ampeg BSE410H Series Bass Cabinets

The Ampeg BSE410H Series Bass Cabinets are quality two-way speaker cabinets suitable for all venue sizes. They feature heavy-duty recessed handles, removable casters, and a heavy gauge steel grill for maximum speaker protection.

The jackplate of the cabinets features two 1/4 jacks wired in parallel, allowing easy daisy chaining from one speaker to another. Each jack may be used as an input or a through connection. The three-position HF Horn switch allows for:

High Frequency Attenuation
Off
Full Range Inputs

Technical Specifications

| BSE410H| BSE410HS| BSE410HLF
---|---|---|---
Type| 4×10 Bass Enclosure| 4×10 Bass Enclosure| 4×10 Bass Enclosure
Usable Low Freq (-10dB)| 40Hz| 40Hz| 36Hz
Power Handling (RMS)| 200W| 400W| 400W

Product Usage Instructions

Setting Up the Bass Cabinet

Place the bass cabinet in the desired location, ensuring it is stable and secure.
Connect your amplifier output to one of the 1/4 input jacks on the jackplate of the cabinet.
If using multiple cabinets, daisy chain them by connecting the output of one cabinet to the input of the next using the provided jacks.

Adjusting the HF Horn Switch

The three-position switch on the jackplate allows you to adjust the high-frequency attenuation levels.
Set the switch to ‘High’ for maximum high-frequency output, ‘Off’ for a neutral sound, and ‘0’ for attenuation.

Important Safety Instructions

Read and follow all safety instructions provided in the user manual.
Do not exceed the recommended power handling capacity of the bass cabinet to prevent damage.

Frequently Asked Questions

Q: Can I connect multiple instruments to the bass cabinet?

A: Yes, you can connect multiple instruments by using a mixer or a signal splitter before connecting to the cabinet’s input jack.

Q: How do I transport the bass cabinet?

A: Use the heavy-duty recessed handles or attach the removable casters for easier transport. Ensure proper lifting techniques to prevent injury.

BSE410H Series
Bass Cabinets

Ampeg-BSE410H-Series-Bass-Cabinets-fig-1

Please read this user’s guide prior to using your new enclosure.

Ampeg BSE410H Series 4×10 Bass Cabinets are quality two-way speaker cabinets suitable for all venue sizes.
The cabinets feature heavy duty recessed handles, remove-able casters, and a heavy gauge steel grill for maximum speaker protection.
The jackplate features two 1/4” jacks wired in parallel, allowing easy daisy chaining from one speaker to another. Each of the jacks may be used as an input or a through connection. The three position HF Horn switch allows for:

Full high frequency output (0 setting)
6dB reduction of the high frequencies though the horn (-6 setting)
Horn shutoff (off setting)

IMPORTANT SAFETY INSTRUCTIONS

Read, follow and keep these instructions. Heed all warnings.
This speaker is capable of producing high sound pressure levels that may cause permanent hearing damage. User caution is advised and ear protection is recom-mended during use.
This speaker is designed for use on a level floor or mounted to a properly rated speaker stand with the supplied stand mount adapter. The use of a speaker stand poses a risk of personnal injury. Installations should be performed by a profes-sional installer in accordance with local building codes.
Speaker cables are a tripping hazard and must be routed out of traffic areas and away from any possible accidental contact.
Do not expose this speaker to rain or moisture. Do not place liquid filled contain-ers on this speaker. Clean only with a damp cloth.
Repair or service of this speaker should be performed only by qualified personnel.

The BSE410H Series Jackplate