Ampeg HSVT Series Speaker Cabinets User Guide

June 1, 2024
ampeg

Ampeg-logo

Ampeg HSVT Series Speaker Cabinets

Ampeg-HSVT-Series-Speaker-Cabinets-prodcut

Technical Specifications

Model| Impedance| Power Rating (rms)| Sensitivity (dB SPL 1W/1m)| Maximum SPL (dB)| LF drivers| HF horn| Inputs/Outputs| Size (H x W x D)| Weight
---|---|---|---|---|---|---|---|---|---
HSVT-810AV| Mono: 4 (8×10) Stereo: 8 (4×10)| Mono: 800 W (8×10) Stereo: 400 W 2x (4×10)| 100 dB| 130 dB| 8×10| P| 1 x 1/4 (Mono) / 1 x Speakon (Mono), 2 x 1/4 (Stereo)| 48 x 26 x 16 in| 137 lb

Product Usage Instructions

Standard Setup
To set up your speaker cabinet in a standard configuration, follow these steps:

  1. Place the speaker cabinet in the desired location.
  2. Connect the amplifier output to the cabinet’s input jack using a 1/4″ cable.
  3. Adjust the High-Frequency Horn Level Control to your preference.

Parallel Setup
If you want to set up multiple speaker cabinets in parallel, be sure to:

  • Use cabinets with the same impedance.
  • Daisy chains the cabinets by connecting them in a series.

Rear Panel Connector Plate Styles
The rear panel features various connector plate styles for different setups. Refer to the user manual for detailed illustrations and instructions on using each style.

What’s in the Box

HSVT-810AV, HSVT-810E, SVT®-810AV, SVT-810E, SVT-610HLF, HSVT-410HLF, SVT- 410HLF, SVT-410HE, SVT-210AV, SVT-212AV, SVT-112AV, SVT-15E, PN-115HLF, PN- 210HLF, PN-410HLF, PF-115HE, PF-210HE, PF-115LF, PF-410HLF, or PF-112HLF Speaker Cabinet, Quick Start Guide.

Hookup Diagrams

Standard Setup

Ampeg-HSVT-Series-Speaker-Cabinets-fig-1

Parallel Setup

Ampeg-HSVT-Series-Speaker-Cabinets-fig-2

Daisy Chaining

Ampeg-HSVT-Series-Speaker-Cabinets-fig-3

Rear Panel Connector Plate Styles

Ampeg-HSVT-Series-Speaker-Cabinets-fig-4

  1. 1/4″ Input / Output Jacks: Connect the speaker-level output of an amplifier to the cabinet’s Input jack. Each of the jacks may be used as an input or a through connection.
  2. Speakon® Input / Output Jacks: Connect the speaker-level output of an amplifier to the cabinet’s Input jack. Each of the jacks may be used as an input or a through connection.
  3. High-Frequency Horn Level Control / Attenuator: Adjusts the level to the high-frequency horn.

Technical Specifications

| Frequency Response (+/–3 dB)| Usable Low Frequency (–10 dB)| ****

Impedance

| ****

Power Rating (rms)

| Sensitivity (dB SPL 1W/1m)
---|---|---|---|---|---
HSVT-810AV| 58 Hz – 5 kHz| 40 Hz| Mono: 4Ω    (8×10)

Stereo: 8Ω      (4×10)

| Mono: 800 W (8×10)

Stereo: 400 W 2x (4×10)

| 100
HSVT-810E| 58 Hz – 5 kHz| 40 Hz| Mono: 4 Ω     (8×10)

Stereo: 8 Ω     (4×10)

| Mono: 800 W (8×10)

Stereo: 400 W 2x (4×10)

| 100
SVT-810AV| 58 Hz – 5 kHz| 40 Hz| Mono: 4Ω      (8×10)

Stereo: 8Ω      (4×10)

| Mono: 800 W (8×10)

Stereo: 400 W 2x (4×10)

| 100
SVT- 810E| 58 Hz – 5 kHz| 40 Hz| Mono: 4Ω      (8×10)

Stereo: 8Ω      (4×10)

| Mono: 800 W (8×10)

Stereo: 400 W 2x (4×10)

| 100
SVT- 610HLF| 53 Hz – 18 kHz| 42 Hz| 4| 600 W| 98
HSVT- 410HLF| 48 Hz – 18 kHz| 28 Hz| 4| 500 W| 98
SVT- 410HLF| 48 Hz – 18 kHz| 28 Hz| 4| 500 W| 98
SVT-410HE| 60 Hz – 18 kHz| 43 Hz| 8| 500 W| 98
SVT-210AV| 58 Hz – 5 kHz| 40 Hz| 8| 200 W| 97.8
SVT-212AV| 71 Hz – 18 kHz| 40 Hz| 4| 600 W| 99
SVT-112AV| 70 Hz – 18 kHz| 35 Hz| 8| 300 W| 96
SVT- 15E| 50 Hz – 3 kHz| 33 Hz| 8| 200 W| 98
PN-115HLF| 48 Hz – 10 kHz| 28 Hz| 8| 575 W| 98
PN-210HLF| 70 Hz – 10 kHz| 40 Hz| 8| 550 W| 97
PN-410HLF| 70 Hz – 10 kHz| 38 Hz| 8| 850 W| 100
PF-115HE| 50 Hz – 17 kHz| 35 Hz| 8| 450 W| 99.5
PF-210HE| 53 Hz – 17 kHz| 38 Hz| 8| 450 W| 99.6
PF-115LF| 57 Hz – 3.7 kHz| 32 Hz| 8| 400 W| 99.5
PF- 410HLF| 55 Hz – 17 kHz| 30 Hz| 8| 800 W| 101
PF- 112HLF| 68 Hz – 14 kHz| 49 Hz| 8| 200 W| 96

All specifications subject to change

Maximum SPL (dB)|

LF drivers

|

HF horn

|

Inputs/Outputs

|

Size (H x W x D)

|

Weight

---|---|---|---|---|---
130| 8×10″| | 1 x 1/4″ (Mono) / 1 x Speakon® (Mono) 2 x 1/4″ (Stereo)| 48 x 26 x 16 in

1219 x 660 x 406 mm

| 137 lb

62.1 kg

130| 8×10″| | 1 x 1/4″ (Mono) / 1 x Speakon® (Mono) 2 x 1/4″ (Stereo)| 48 x 26 x 16 in

1219 x 660 x 406 mm

| 137 lb

62.1 kg

130| 8×10″| | 1 x 1/4″ (Mono) / 1 x Speakon (Mono) 2 x 1/4″ (Stereo)| 48 x 26 x 16 in

1219 x 660 x 406 mm

| 140 lb

63.5 kg

130| 8×10″| | 1 x 1/4″ (Mono) / 1 x Speakon (Mono) 2 x 1/4″ (Stereo)| 48 x 26 x 16 in

1219 x 660 x 406 mm

| 140 lb

63.5 kg

125| 6×10″| ✓| 2 x 1/4″

2 x Speakon

| 40 x 24 x 16 in

1016 x 610 x 406 mm

| 115 lb

52.2 kg

125| 4×10″| ✓| 2 x 1/4″

2 x Speakon

| 30 x 24 x 19 in

762 x 610 x 483 mm

| 73 lb

33.1 kg

125| 4×10″| ✓| 2 x 1/4″

2 x Speakon

| 30 x 24 x 19 in

762 x 610 x 483 mm

| 74 lb

33.6 kg

122| 4×10″| ✓| 2 x 1/4″

2 x Speakon

| 25 x 24 x 16 in

635 x 610 x 406 mm

| 71 lb

32.2 kg

121| 2×10″| | 2 x 1/4″| 25 x 13 x 11 in

635 x 330 x 280 mm

| 26 lb

11.8 kg

127| 2×12″| ✓| 2 x 1/4″| 25 x 24 x 16 in

635 x 610 x 406 mm

| 66 lb

29.9 kg

121| 1×12″| ✓| 2 x 1/4″| 17 x 24 x 16 in

432 x 610 x 406 mm

| 45 lb

20.4 kg

123| 1×15″| | 2 x 1/4″

2 x Speakon

| 24 x 22 x 16 in

610 x 559 x 406 mm

| 72 lb

32.7 kg

125| 1×15″| ✓| 2 x 1/4″

2 x Speakon

| 23.5 x 22.8 x 17.5 in

597 x 578 x 445 mm

| 59 lb

26.8 kg

124| 2×10″| ✓| 2 x 1/4″

2 x Speakon

| 18 x 22.8 x 17.3 in

456 x 578 x 439 mm

| 44 lb

20 kg

127| 4×10″| ✓| 2 x 1/4″

2 x Speakon

| 26.5 x 22.8 x 17.5 in

673 x 578 x 445 mm

| 64 lb

29 kg

125.5| 1×15″| ✓| 2 x 1/4″| 23 x 21 x 14.3 in

584 x 533 x 363 mm

| 44.8 lb

20.3 kg

125.6| 2×10″| ✓| 2 x 1/4″| 23 x 21 x 14.3 in

584 x 533 x 363 mm

| 47.6 lb

21.6 kg

125.5| 1×15″| | 2 x 1/4″| 23.5 x 22.75 x 17.5 in

598 x 578 x 445 mm

| 55.8 lb

25.4 kg

130| 4×10″| ✓| 2 x 1/4″| 27.3 x 22.75 x 17.5 in

693 x 578 x 445 mm

| 73.4 lb

33.3 kg

122| 1×12″| ✓| 2 x 1/4″| 19.8 x 17.1 x 13.1 in

503 x 434 x 333 mm

| 30.8 lb

14.0 kg

WARRANTY

WARRANTY AND SUPPORT
Visit WWW.AMPEG.COM to…

  1. Identify warranty coverage provided in your local market. Please keep your sales receipt in a safe place.
  2. retrieve a full-version, printable OWNER’S MANUAL (English only) for your product.
  3. REGISTER your product.
  4. CONTACT Technical Support, or call 818-575-3600.

Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information

Unique Identifiers: Ampeg HSVT-810AV, HSVT-810E, SVT®-810AV, SVT-810E, SVT-610HLF, HSVT-410HLF, SVT-410HLF, SVT-410HE, SVT-210AV, SVT-212AV, SVT- 112AV, SVT-15E, PN-115HLF, PN-210HLF, PN-410HLF, PF-115HE, PF-210HE, PF-115LF, PF-410HLF, and PF-112HLF Speaker Cabinets

Responsible Party – U.S. Contact Information:
Yamaha Guitar Group, Inc.
26580 Agoura Road
Calabasas, CA 91302-1921
818-575-3600
https://ampeg.com/

FCC  Statement

FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

www.ampeg.com
Yamaha Guitar Group, Inc.
26580 Agoura Road, Calabasas, CA 91302-1921 USA Part No. 40-00-0527 Rev. C

Ampeg-HSVT-Series-Speaker-Cabinets-fig-5

© 2019 Yamaha Guitar Group, Inc. All rights reserved.
Ampeg, the Ampeg logo, and SVT are trademarks or registered trademarks of Yamaha Guitar Group, Inc. in the U.S. and/or other jurisdictions. Speakon is a registered trademark of Neutrik AG Corporation.

Serial Number: __

FAQ

  • Q: Can I mix different impedance speaker cabinets in a parallel setup?
    • A: It is recommended to use speaker cabinets with the same impedance to avoid any issues with the overall setup and performance.
  • Q: How should I connect the amplifier to the speaker cabinet?
    • A: Use a 1/4″ cable to connect the speaker-level output of the amplifier to the input jack on the cabinet. Ensure a secure connection for optimal sound quality.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals