Ampeg SVT-112AV Speaker Cabinets Owner’s Manual
- June 1, 2024
- ampeg
Table of Contents
SVT-112AV & SVT-212AV
Speaker Cabinets
Owner’s
Manual
What’s in the Box
SVT ® -112AV or SVT-212AV Speaker Cabinet, Quick Start Guide.
Introduction
The Ampeg SVT®-112AV and SVT-212AV bass cabinets deliver unmistakable Ampeg
tone in rugged, ported cabinet designs that bridge the gap between the fast
transient response you want and the rich low end you deserve.
The authentic Ampeg round sound is provided courtesy of stamped frame ceramic
12″ Eminence speakers. The lightweight, yet road-worthy, professional grade
cabinets are made of 15 mm poplar plywood, have a ported design, vintage AV
style cosmetics, and the classic Ampeg clamshell logo.
The rear panel control features two 1/4″ inputs wired in parallel for flexible
patching capabilities. Also included is a 3-way level control that allows you
to control how much signal you want to pass on to the HF horn.
Rated at 300W RMS power handling at 8 Ω, the SVT-112AV is a great match with
the PF-350 or MICRO-VR amplifiers, or for integrating with other Ampeg
cabinets into a single rig. The SVT-212AV is a 4 Ω cab rated at 600W RMS. This
is perfect for the latest V-4B, along with other amplifier heads, like the
SVT-CL, SVT-VR or PF-500.
In order to get the most out of your new cabinet, please read this manual, as
well as the Important Safety Instructions included with your SVT-112AV or SVT-
212AV cabinet, before you begin playing. Best of luck in all of your musical
endeavors!
Features
And thank you for choosing Ampeg.
- Custom Eminence LF driver(s)
- Ported for additional low-frequency extension
- Integrated side handle(s)
- Ampeg AV finish [Classic black grille sold separately]
Rear Panel Connector Plate
-
1/4″ TS Full Range Input / Output Jacks: The jackplate features two 1/4″ jacks wired in parallel, allowing easy daisy-chaining from one speaker to another. Each of the jacks may be used as an input or a through connection.
Connect the speaker-level output of your amplifier to the cabinet’s Input jack using a good quality (non-shielded) speaker cable. Never use (shielded) instrument cable to connect speakers to an amplifier.
You can optionally utilize the unused jack as an output/through jack to connect a second speaker cabinet in parallel. -
High Frequency Horn Level Switch: The three-position HF Horn switch allows for:
- Full high frequency output (0 setting)
- High frequencies reduced by 6 dB (–6 setting)
- Horn shutoff (OFF setting)
System Block Diagrams
Technical Specifications
| SVT-112AV| SVT-212AV
---|---|---
Frequency Resonse (+ / – 3 dB)| 70 Hz – 18 kHz| 71 Hz – 18 kHz
Usable Low Frequency (-10 dB)| 35 Hz| 40 Hz
Power Rating| 300W RMS| 600W RMS
Sensitivity| 96 dB SPL 1W/1m| 99 dB SPL 1W/1m
Maximum SPL| 121 dB SPL| 127 dB SPL
Cabinet Construction| Rugged 15 mm poplar ply enclosure
Speaker Specs| 1 x 12″ custom Eminence LF driver
1 HF horn with 3-position switch| 2 x 12″ custom Eminence LF driver
1 HF horn with 3-position switch
Inputs/Outputs| Dual 1/4″ parallel jacks
Size (H x W x D)| 17 in x 24 in x 16 in
432 mm x 610 mm x 406 mm| 25 in x 24 in x 16 in
635 mm x 610 mm x 406 mm
Weight| 45 lbs / 20.4 kg| 66 lbs / 29.9 kg
The cabinet is covered with a durable, fabric-backed vinyl material. Clean
with a dry lint-free cloth. Never spray cleaning agents onto the cabinet.
Avoid abrasive cleansers which would damage the finish.
Ampeg continually develops new products, and improves upon existing ones. For
this reason, the specifications and information in this manual are subject to
change without notice.
Warranty and Support
Visit WWW.AMPEG.COM to…
- identify WARRANTY coverage provided in your local market. Please keep your sales receipt in a safe place.
- REGISTER your product.
- CONTACT Technical Support, or call 818-575-3600.
© 2019 Yamaha Guitar Group, Inc. All rights reserved.
Ampeg, the Ampeg logo, and SVT are trademarks or registered trademarks of
Yamaha Guitar Group, Inc. in the U.S. and/or other jurisdictions. Eminence is
a registered trademark of Eminence Speaker, LLC.
www.ampeg.com
Yamaha Guitar Group, Inc.
26580 Agoura Road, Calabasas, CA 91302-1921 USA Rev. A
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>