RAIDER MM25DFA Full HD 240Hz Gaming Monitor Instruction Manual
- June 1, 2024
- Raider
Table of Contents
RAIDER MM25DFA Full HD 240Hz Gaming Monitor
Specifications
- Product Name: 25 RAIDER-240Hz PRO Gaming
- Refresh Rate: 240Hz
- Usage: Gaming Monitor
- Power Supply: Provided Power Unit
- Cleaning: Rub delicately with a dry cloth
- Privacy: Subject to local laws and regulations
Product Usage Instructions
Warnings
Only use the provided power unit to power the device. Check the mains
rating before plugging in. Avoid pulling the cable to unplug the device.
Safety Precautions
Keep the device away from rain and humidity. Do not introduce any material
inside. Do not open the device. Keep away from children and use with dry
hands. Disconnect power if not in use for an extended period.
Installation Precautions
Avoid overheating by allowing airflow through the slots. Maintain free
space around the device. Do not install near heat sources, direct sunlight,
dust, vibrations, or shocks. Place on a stable surface. Avoid exposure to
humidity or water.
Cleaning the Device
Rub gently with a dry cloth to remove dust and dirt. Use neutral detergent
if necessary. Avoid volatile liquids or chemically treated clothes.
Privacy and Copyright
The monitor is for CCTV systems. Follow local laws on recording images and
copyright protection. The manufacturer is not liable for non-compliance.
GENERAL INFORMATION
Dear Customer,
Thank you for having purchased this product. This document describes how to
install and use the LED-backlit LCD color monitor. Read this manual which
contains information for correct, safe use. Keep this manual at hand so that
you can refer to it when needed.
PRODUCT DESCRIPTION AND TYPE OF USE
The LED-backlit LCD color monitor presents a very rugged structure. It is
designed for continuous operation and can be used in closed-circuit TV systems
without risk of excessive fatigue. The Flat Panel Display has an active
matrix, thin-film transistor (TFT), and liquid crystal display (LCD).
GENERAL FEATURES
- DC 12V Power Input
- Display area
- Wall mounting VESA standard 75*75mm (Not included bracket)
- DP Input video input Interface
- HDMI Input video input Interface
- Audio Onput Interface
- Multilingual OSD menu for easy setting and optimization of the display
OPENING THE BOX
Check that the packing and the contents are not visibly damaged. Contact the
reseller immediately if parts are either missing or damaged. Do not attempt to
use the device in this case. Send the product back in its original packing if
it is damaged.
CONTENTS OF THE BOX
- Monitor
- Power Adapter
- DP cable
- User’s manual
- Table stand
Important Note : Accessories may be changed without prior notice.
WARNINGS
POWER
- Only use the power unit provided to power the device. Check mains rating before plugging the power unit in.
- Do not pull the cable to unplug the device.
SAFETY PRECAUTIONS
- Keep the device away from rain and humidity to prevent risk of fire and electrocution. Do not introduce material (solid or liquid) inside. If this should accidentally occur, disconnect the device from the mains and have it inspected by qualified personnel.
- Never open the device. In all cases, contact the qualified personnel or authorized service center for repairs.
- Keep the device away from children, to prevent accidental damage.
- Do not touch the device with wet hands to prevent electrical shock or mechanical damage.
- Do not use the device if it should fall or the external casing is damaged. Risk of electrocution
if the device is used in such conditions. Contact the reseller or your installer.
It is advisable to disconnect the power wire if the monitor is not used for an extended period.
INSTALLATION PRECAUTIONS
- To prevent overheating the device, arrange it in a position allowing the flow of air through the slots in the casing. Ensure at least 5 cm of free space when installing inside a rack. For the same reason, do not install near sources of heat, such as radiators or hot air ducts. Keep away from direct sunlight. Do not install in areas subject to excessive dust, mechanical vibrations or shocks.
- Do not arrange this device on an unstable surface, such as a tottering or slanted table.
- The device could fall causing injury or mechanical failures.
- Do not install the device in a place where it could be exposed to humidity or water. Do not direct a jet of water onto the device: risk of fire, electrocution or mechanical failure.
- Stop using the device if water or other material should penetrate inside: risk of fire and electrocution. Contact the retailer or authorized installer.
- Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or covered.
- Do not place heavy or heat generating objects on top of the device: this could damage the casing and/or increase internal temperature causing faults.
- Do not cover the device with a cloth while it is running to prevent deforming the external casing and overheating the internal parts: risk of fire, electrocution and mechanical failure.
- Keep magnets and magnetized objects away from the device to prevent faults.
- Do not use the device in the presence of smoke, vapor, humidity, dust or intense vibrations.
- Wait for a while before operating a device immediately after transporting it from a cold place to a warm place and vice versa. Wait on average for three hours: this will allow the device to adapt to the new ambient temperature and/or humidity, etc.
- The monitor is provided with a plastic base and rubber feet. It can be positioned on a hori-zontal surface, such as a desk or a table. Make sure that the device is fastened firmly and that it is not resting on unstable supports or surfaces. Dropping could cause severe injury and damage the device.
- Remember to adjust the brightness and contrast to obtain a perfect image.
- The monitor can also be installed on the wall by means of a bracket (not provided).
CLEANING THE DEVICE
- Rub delicately with a dry cloth to remove dust and dirt.
- Dip the cloth in neutral detergent if dirt cannot be eliminated with a dry cloth alone.
- Do not use volatile liquids (such petrol, alcohol, solvents, etc.) or chemically treated cloths to clean the device to prevent deformation, deterioration or scratches to the paint finish.
PRIVACY AND COPYRIGHT
- The monitor is a device for CCTV systems. Recording of images is subject to the laws in force in your country. Recording of images protected by copyright is forbidden.
- Product users shall be responsible for checking and respecting all local rules and regulations concerning monitoring and recording video signals. The manufacturer SHALL NOT BE LIABLE for use of this product not in compliance with the laws in force.
Monitor Inputs
Accessories
Monitor Control Buttons
How to Use the Monitor Button
- When the monitor displays nothing, the Monitor Button could be used as below.
INITIAL SETUP
Connect the monitor to a power outlet.
- Press the POWER button on the monitor or to turn it on (The indicator will be blue).
- Connect the relevant cable to the corresponding input on the monitor. The source will be automatically detected.
- To change between inputs, press the “Source” button to enter the source menu. Use the
buttons to choose the input source between Auto Select, DP, HDMI1 and HDMI2.
OSD MENU CONTROLS
A . View Mode
B . Manual Image Adjust
**C. Color Adjust
**
D . Audio Adjust
E. Input Select
F. Setup Menu
Technical Specifications
- Model No.: 25″ RAIDER-240Hz PRO Gaming
- Screen Size 24.5”
- Panel Type: VA
- Backlight type: LED
- Aspect Ratio: 16:9
- Brightness (Typical.): 350cd/m²
- Contrast Ratio (Typical.): 3000:1
- Resolution: 1920×1080 @ 240Hz
- Response Time (Max. with OD): MMPRT 1ms
- Viewing Angle (Horizontal/Vertical): 178º/178º (CR>10)
- Color Support: 16.7M (8bit 100% sRGB)
- Video Signal: Analog RGB/Digital
- Sync. Signal : separate H/V, Composite, SOG
- Connector: HDMI2.0x2+DP1.4×1
- Power Consumption: <0.5W
- Type :DC12V, 4A
- Freesync and Adaptive sync: Supported
- HDR: Supported
- Plug & Play: Supported
- Cabinet Color: Matt Black
- Flick free:” Supported
- Over Driver: Supported
- Low Blue Light Mode: Supported
- VESA mount: 75x75mm
‘The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
FAQ
Q: Can I use a different power unit to power the device?
A: No, it is recommended to only use the provided power unit to avoid damage.
Q: How often should I clean the device?
A: Clean the device regularly with a dry cloth and use detergent if needed.
Q: What should I do if water gets inside the device?
A: Stop using the device immediately and contact the retailer or authorized installer for assistance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>