ZEBRA ZQ610 Mobile Printers User Guide
- June 1, 2024
- ZEBRA
Table of Contents
ZEBRA ZQ610 Mobile Printers
Product Information
Specifications:
- Models: Zebra ZQ610, ZQ620, ZQ630, ZR658, ZR668
- Manufactured in : China
- Compliance: RoHS, FCC, CE, ISED
- Website: www.zebra.com
Product Usage Instructions
Regulatory Information:
All Zebra devices are compliant with national and international regulations. For more information, visit www.zebra.com/compliance.
End User License Agreement:
For the complete End User License Agreement, visit www.zebra.com/eula.
Warranty:
For the hardware product warranty statement, visit www.zebra.com/warranty.
China RoHS Material Declaration:
This equipment complies with China RoHS regulations. Refer to the provided table for details on toxic or hazardous substances.
European Union (EU) Compliance:
Zebra Technologies Corporation declares compliance with Directive 2014/53/EU for WLAN and Bluetooth equipment. Full text available at www.zebra.com/compliance.
FAQ
- Q: Where can I find the latest version of the user guide?
- A: The latest version of the user guide can be found at www.zebra.com/support.
- Q: What should I do if I need to make changes or modifications to the Zebra equipment?
- A: Any changes or modifications not expressly approved by Zebramay void the user’s authority to operate the equipment.
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp.,
registered in many jurisdictions worldwide. All other trademarks are the
property of their respective owners. © 2022 Zebra Technologies Corp. and/or
its affiliates.
All rights reserved.
worldwide
Regulatory Information
All Zebra devices are designed to be compliant with the rules and regulations
in the locations they are sold and will be labeled as required. For more
information about Zebra’s compliance with national and international mandates,
go to: www.zebra.com/compliance
For the latest version of this guide, go to:
www.zebra.com/support
Any changes or modifications to Zebra equipment, not expressly approved by Zebra, could void the user’s authority to operate the equipment.
End User License Agreement
For the complete End User License Agreement, go to www.zebra.com/eula
Warranty
For the complete hardware product warranty statement, go to www.zebra.com/warranty
Brazil
This equipment’s operation is of a secondary character; that is, it doesn’t have the right to protection against damaging interference, even from stations of the same type, nor can it cause interference to systems with a primary operating character.
Innovation, Science and Economic Development Canada (ISED) Warning
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1) This device may not cause interference., 2) This device must accept any interference, including interference that may cause undesired operation of the device.
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
China
(ZQ610, ZQ620 , ZQ630, ZR658, ZR668 China RoHS Material Declaration)
European Union (EU)
Hereby, Zebra Technologies Corporation declares that the radio equipment type WLAN or Bluetooth is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of conformity is available at the following internet address: www.zebra.com/compliance
Waste Electrical and Electronic Equipment (WEEE)
Do not dispose of this product in unsorted municipal waste. This product is
recyclable and should be recycled according to your local standards. For more
information, please see our website at:
www.zebra.com/environment
Antenna Information:
- Type = Patch
- Gain = 3.66 dBi @ 2.4 GHz
- Gain = 3.19 dBi @ 5 GHz
Radio Frequency Bands and Maximum Power Levels EIRP:
Bluetooth
- 2.4 GHz
- 10 dBm
WiFi
- 2.4 GHz, 20 dBm
- 5 GHz, 27 dBm
Korea
The equipment is for home use (Class B) and has acquired electromagnetic conformity registration, so it can be used not only in residential areas but in other areas as well.
This radio device is not allowed to be used for human safety since it has the possibility of radio interference during operation.
- IFT ID : ANC2101C00000347
- IFT ID : ANC2101C00001779
- IFT ID : ANC2101C00000332
Antenna Information:
- Type = Patch
- Gain = 3.66 dBi @ 2.4 GHz
- Gain = 3.19 dBi @ 5 GHz
United States of America
FCC Compliance
This device complies with Part 15 rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for Class B Digital Devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the product manuals, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, the user is encouraged to do one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced RF service technician for help.
The user is cautioned that any changes or modifications not expressly approved by Zebra Technologies could void the user’s authority to operate the equipment. To ensure compliance, this printer must be used with fully shielded communication cables.
Statement of Compliance
United Kingdom
Non-radio devices: Zebra hereby declares that this equipment is in compliance with Electromagnetic
Compatibility Regulations 2016, the Electrical Equipment (Safety) Regulations
2016 and the Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment Regulations 2012.
Radio-enabled devices: Zebra hereby declares that this equipment is in
compliance with the Radio Equipment Regulations 2017 and the Restriction of
the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012.
Any radio operation limitations within UK are identified in Appendix A of UK Declaration of Conformity.
The full text of the UK Declaration of Conformities is available at: www.zebra.com/doc.
- UK Importer : Zebra Technologies Europe Limited
- Address: Dukes Meadow, Millboard Rd, Bourne End, Buckinghamshire, SL8 5XF
Worldwide
Regulatory Information
All Zebra devices are designed to be compliant with the rules and regulations in the locations they are sold and will be labeled as required. For more information about Zebra’s compliance with national and international mandates, go to: www.zebra.com/compliance
For the latest version of this guide, go to: www.zebra.com/support
Any changes or modifications to Zebra equipment, not expressly approved by Zebra, could void the user’s authority to operate the equipment.
End User License Agreement
For the complete End User License Agreement, go to www.zebra.com/eula
Warranty
For the complete hardware product warranty statement, go to www.zebra.com/warranty
Brazil
This equipment’s operation is of a secondary character; that is, it doesn’t have the right to protection against damaging interference, even from stations of the same type, nor can it cause interference to systems with a primary operating character.\
Printed in China on chlorine-free recycled paper
- Zebra Technologies
- 3 Overlook Point
- Lincolnshire, IL 60069 USA
- http://www.zebra.com
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp.,
registered in many jurisdictions worldwide. All other trademarks are the
property of their respective owners. © 2022 Zebra Technologies Corp. and/or
its affiliates.
All rights reserved.
Canada
DOC Compliance
This Class B digital apparatus complies with Canadian ICES-003.
Innovation, Science and Economic Development Canada (ISED) Warning
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1) This device may not cause interference., 2) This device must accept any interference, including interference that may cause undesired operation of the device.
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems
China
(ZQ610, ZQ620, ZQ630, ZR658, ZR668 China RoHS Material Declaration)
European Union (EU)
Hereby, Zebra Technologies Corporation declares that the radio equipment type WLAN or Bluetooth is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www.zebra.com/compliance
Technologies Europe Limited
Dukes Meadow, Millboard Road Bourne End, Buckinghamshire, SL8 5XF, UK
Waste Electrical and Electronic Equipment (WEEE)
Do not dispose of this product in unsorted municipal waste. This product is recyclable and should be recycled according to your local standards. For more information, please see our website at: www.zebra.com/environment
Antenna Information:
- Type = Patch
- Gain = 3.66 dBi @ 2.4 GH
- Gain = 3.19 dBi @ 5 GHz
Radio Frequency Bands and Maximum Power Levels EIRP:
Bluetooth
- 2.4 GHz
- 10 dBm
WiFi
- 2.4 GHz, 20 dBm
- 5 GHz, 27 dBm
Korea
The equipment is for home use (Class B) and has acquired electromagnetic conformity registration, so it can be used not only in residential areas but in other areas as well.
This radio device is not allowed to be used for human safety since it has the possibility of radio interference during operation.
United States of America
FCC Compliance
This device complies with Part 15 rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for Class B Digital Devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the product manuals, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, the user is encouraged to do one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced RF service technician for help.
The user is cautioned that any changes or modifications not expressly approved by Zebra Technologies could void the user’s authority to operate the equipment. To ensure compliance, this printer must be used with fully shielded communication cables.
United Kingdom Statement of Compliance
- Non-radio devices: Zebra hereby declares that this equipment is in compliance with the Electromagnetic Compatibility Regulations 2016, the Electrical Equipment (Safety) Regulations 2016 and the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.
- Radio-enabled devices: Zebra hereby declares that this equipment is in compliance with the Radio Equipment Regulations 2017 and the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.
- Any radio operation limitations within the UK are identified in Appendix A of the UK Declaration of Conformity.
The full text of the UK Declaration of Conformities is available at: www.zebra.com/doc.
- UK Importer : Zebra Technologies Europe Limited
- Address : Dukes Meadow, Millboard Rd, Bourne End, Buckinghamshire, SL8 5XF