RAIDER RD-EFH10 Electric Ceramic Fan Heater User Manual

RAIDER RD-EFH10 Electric Ceramic Fan Heater

Product Information

Specifications

• Model: RD-EFH10
• Current: 230V
• Frequency: 50Hz
• Nominal Heat Capacity: 2000W
• Power Settings: 30W/2000W/2000W
• Max Current Consumption: 13A
• Air Volume Flow: 150m3/h
• Heated Area: 30m2
• Resistance Norm (Ingress Protection): IP24

Product Usage Instructions

Initial Setup and Safety Precautions
Ensure the device is placed on a stable surface and not obstructed. Check the power supply voltage and switch off the device before any maintenance.

Thermostat Control and Power Settings
Use the thermostat control switch to adjust the desired temperature. The power switch allows for three settings: 30W, 2000W, and 2000W. Ensure proper ventilation around the heater.

Operating the Heater
Ensure the heater is plugged into a suitable power outlet (230V) and not overloaded. Follow the recommended heated area guidelines and adjust settings accordingly.

Cooling Fan Setting
The cooling fan setting can be used to circulate air without heating. Ensure proper airflow and avoid obstructing the fan vents.

FAQs

Q: How do I clean the heater?
A: Switch off the heater and allow it to cool. Use a soft, dry cloth to gently wipe the exterior. Do not use water or abrasive cleaners.

Q: Can I leave the heater unattended?
A: It is recommended not to leave the heater unattended while in operation for safety reasons. Always switch it off when not in use.

Dear Customer,
Congratulations on the purchase of appliance from the fastest growing brand of electric,gasoline and pneumatic tools – RAIDER. When properly installed and operating, RAIDER are safe and reliable machines and work with them will deliver a real pleasure. For your convenience has been built and excellent service network of 45 service stations across the country.
Before using this machine, please carefully acquainted with these “instructions for use.
In the interest of your safety and to ensure proper use and read these instructions carefully,including the recommendations and warnings in them. To avoid unnecessary errors and accidents,it is important that these instructions will remain available for future reference to all who will use the appliance. If you sell it to a new owner “Instructions for Use” must be submitted along with it to enable new users to become familiar with relevant safety and operating instructions.
RAIDER exclusive representative of a company EUROMASTER Import Export Ltd., Sofia 1231, “Lomsko shosse 246, tel 02 934 33 33, 934 10 10, www.raider.bg; www.euromasterbg.com; e-mail: info@euromasterbg.com.

Since 2006 the company introduced the system of quality management ISO 9001:2008 with scope of certification: Trade, import, export and servicing of hobby and professional electrical,mechanical and pneumatic tools and general hardware. The certificate was issued by Moody International Certification Ltd, England.

Technical data

Description of second page

1. Thermostat control switch.
2. Power switch with function:

General instructions for safe operation.

Read all instructions! Failure to follow all instructions can lead to unintended consequences. Keep these instructions in a safe place.

Safety workplace.

1. Keep the space around the heater always clean.

2. The heater is not designed for heating in wet premises. Whatever falls of water or falling of the appliance in water is very dangerous and is a prerequisite for electric shock and / or serious damage!
   Do not use the heater in the immediate surroundings of baths, showers, or swimming pool!

3. Never place the heater on carpets with long fibres!

4. Make sure the heater is positioned on a stable, horizontal surface.

5. Do not place the heater near furniture!

6. Do not use the heater near open windows and flammable objects such as curtains, tablecloths, clothes and similar.

7. Do not switch the heater within the environments with increased risk of explosion in the vicinity of flammable liquids, gases, dust, etc.

8. Be vigilant when you turn on the heater in rooms where present children or disabled persons!

9. Be vigilant when you turn on the heater in rooms with pets!

10. Never leave alone your pet in a room with switched on heater!

11. Warning! To prevent overheating, do not cover the heater!

12. Warning! The heater must not be placed directly under, or towards a wall socket!

13. Do not use the heater outside.

14. Store the heater in places out of reach for children.

15. Do not attempt to insert your fingers or any objects in the front or the rear fan grille when the item is plugged in.

Safety requirements for working with electricity

1. The plug of the heater should not be damaged. Never modify the plug. Do not use any other additional electrical appliances. Do not use plug adapters.
   Using the original plugs and sockets reduces the risk of electric shock.

2. Place the cord away from the heating of the heater as to avoid overheating of the cable.

3. Do not use the cable cord for purposes for which it is not intended, for example to move or re-position the heater by pulling the cable cord or to try to unplug the heater from the wall socket by the cable cord. Keep the cable cord away from heat and sharp edges or objects.

4. Damaged or entangled cords increase the risk of electric shock!

5. Before plugging the socket make sure the switch (2) is in the “0” “off”.

6. Always unplug the heater from the wall socket before moving it.

7. Before cleaning, always unplug the heater.

8. Do not switch the heater if you have dropped it, or if its body is damaged.

9. Do not unplug the heater by pulling the wire out of the wall socket.
   The appliance should cool down through the ventilation effect.

10. Do not use this heater with a programmer, timer or any device that switches the heater on automatically, since a fire risk exists if the heater is positioned incorrectly.

Functional description and purpose of the heater
The heater is an electrical appliance with insulation class II. Basically, it consists of a heater and a fan powered by a single phase electric motor. This item is intended for indoor use with normal humidity and is not suitable for outdoor use.
Operate this appliance according to the manufacturer’s instructions only.

Switch on, switch off.

Be careful with the voltage! The voltage of the network must correspond to the data described on the appliance nameplate. Items marked with 230 V, can be supplied with a voltage of 220 V.

1. Place the plug into the socket.

2. Switch on (2) of the desired mode. (See the second page). Turn the switch and leave it for 5 seconds in the positions!

3. Turn the thermostat (1) in a clockwise direction to its maximum grade.

4. When the room temperature reaches the desired degree, slowly turn the thermostat (1) in counter clockwise direction until the heater is off. You can hear a slight click. This will set the automatic inclusion of the heater to a temperature limit.
   The heater will maintain the chosen temperature automatically and will switch on and off at certain intervals.

5. The heater has built protection against overheating. Thermal circuit breaker.
   The appliance has been equipped with an integrated thermal circuit breaker ensuring high safety level. The breaker will automatically switch the power supply off once a limit temperature is exceeded.

6. It is normal some smell to appear when you switch on the fan heater for the first time or if you have not used it for a long time. This will be short and the smell will gradually disappear.

7. To switch off the item, turn the power switch (2) in counter clockwise direction so that the power switch is at “0” position. Once the heating is off, leave the fan operating for 3 minutes. Then you can unplug the appliance from the wall socket.
   Do not do this by pulling out the power cord!

Service and support

1. Always switch off the plug from the socket before cleaning the heater. Wait until it cools down completely! Use a dry cotton cloth to remove dust. Do not allow water droplets or other liquids to fall inside the heater. When cleaning the heater, do not use harsh chemicals, abrasive materials or inappropriate chemicals.
   The vent of the heater must be always clean and free. Keep the heater in a dry place.

2. Functional inspection.
   The appliance should be checked at least once a year by competent service personnel approved by the manufacturer. Any inspections or repairs should be conducted by competent personnel only.

Environmental protection.
The unit is supplied in packaging to prevent its being damaged in transit. This packaging is raw material and can therefore be reused or can be returned to the raw material system. In view of environmental power, additional accessories and packaging must be subjected to appropriate processing for reuse of the information contained in these materials.
Do not dispose of household waste power! Under the EU Directive 2012/19/EC on scrapped electrical and electronic devices and to win recognition as a national power law, which can be used more, must be collected separately and be subjected to appropriate processing for recovery of contained therein scrap.

“RAIDER” Power Tools are designed and manufactured in accordance with the Balgarian regulations and standards for compliance with all safety requirements.
Content and scope of the commercial guarantee

Warranty

The warranty period “EUROMASTER Import-Export Ltd. gives the territory of Bulgaria, respectively: for persons who have purchased Instrument:

• For domestic use (private) – 24 months.
• Professional use (legal persons who have purchased the product with the invoice) – 12 months. (applies to: hammers, hammers, grinders (180-230 millimeters), circular (handheld and desktop), petrol and electric cutters and moto-cutters and mixers for adhesives and solvents)
  The consumer is entitled to a free repair service in insured warranty period, if warranty is made to fill the signature and stamp dealer, sold the instrument, signed by the customer that is familiar with the warranty conditions and fiscal cash bond or invoice showing the date of purchase.
  Repair and claim to only accept well-cleaning machine!
  Removal of us recognized defect warranty is made as follows: at our option, we are free repair defective instrument or replacing it with a new guarantee period is not renewed.
  Instruments should be used appropriately and in accordance with the instructions.
  To ensure safe operation, the client should be well acquainted with the instructions for use of power tools, safety rules when working with it and its particular purpose. The appliance requires regular cleaning and proper maintenance.

The warranty does not cover:

• Wear colored coating of tools;
• Parts and consumables, which are subject to wear caused by use, such as: grease, oil, brushes, guides, up rollers, drive belts, shaft with a flexible core;
• Additional accessories and consumables such as: handles, batteries, cases, chargers, drills, disc cutters, chisel knives, chains, sandpaper, limiters, polished-washers, chucks, cord reel and a cord for lawn itself and others.;
• Hot melt electrical fuses and bulbs;
• Mechanical damage to the body of the device or decorative elements on it, eye guards, guards on cutting tools, rubber plates, fasteners, linear, power cord and plug;
• The overall damage to the instrument caused by natural disasters such as fires, floods, earthquakes, etc..;

Dropping out of warranty
“And EUROMASTER / E Ltd has the right to refuse warranty service in cases where:

• Inconsistent (or blank) serial number of the device with that of the completed warranty card;
• Indetifikatsionniyat label of the product is deleted or completely missing one;
• Is the attempt to unauthorized interference with unauthorized service maintenance center;
• Damage caused due to misuse (non-instructions) of the device by the customer or third parties;
• Damage caused due to careless handling of the device;
• Damage to rotor or stator, which is designed to clumping between them, due to melting of the insulation caused by prolonged congestion;
• Damage to rotor or stator caused by overload or impaired ventilation, as evidenced by a uniform darkening of the collector or coils;
• No protective discs, load-bearing panels and other components that are part of the structure of the instrument and are intended to ensure its safe and proper operation;
• Power cord of the instrument is extended or replaced on the client;
• Damage caused by overload or lack of ventilation and insufficient lubrication of moving components;
• Wear on bearings due to overloading or prolonged work;
  The deadline for otremontirane adopted in the service of power within a month.

Workshops are not responsible for tools, unclaimed by their owners one month after the legal time frame for repairs!
Regardless of the commercial warranty, the seller is responsible for the lack of conformity of consumer goods with the contract under LCP.
The manufacturer or importer shall not be liable for any injury to the user or material damage. The manufacturer or importer does not provide compensation for losses caused by any failure of the machine.

Exploded Drawing and Spare Parts List

(65c Overheating protection)

6| SWITCH
7| THERMOSTAT

(85c Adjustable thermostat )

8| KNOB
9| CONTROL BOX
10| CABLE GRIP
11| POWER CORD AND PLUG
12| PLUM NUT
13| RUBBER FEET  BACK
14| SUPPORT BRACKET
15| LOCATING PIN
16| RUBBER FEET FRONT
17| CASING
18| FIXING RACK
19| MOTOR AND FAN
20| WIND TURNNEL
21| BACK COVER FOR GRILLER

EU DECLARATION OF CONFORMITY

Euromaster Import Export Ltd.

• Address: Sofia 1231, Bulgaria, 246 Lomsko shausse Blvd.
• Product: Electric Fan Heater
• Brand: RAIDER
• Type Designation: RD-EFH10 is designed and manufactured in conformity with following Directives:

2014/30/EU of the European parliament and of the council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonization of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits

The product fulfils the essential requirements of the following standards:

• EN 60335-1:2012+A11:14+AC:14+A13:2017+A1:2019+A14:2019+A2:2019
• EN 60335-2-30:2009/A11:2012
• EN 62233:2008
• EN 55014-1:2017
• EN 55014-2:2015
• EN 61000-3-2:2019
• EN 61000-3-3:2013

Place&Date of Issue:
Sofia, Bulgaria Brand Manager:
April 14, 2023

«RAIDER» power tools are designed and manufactured in accordance with the regulations and standards for compliance with all safety requirements.
Content and scope of the commercial guarantee.

WARRANTY CONDITIONS

The warranty period is:

• For domestic use (private) – 24 months.
• For professional use (for companies) – 12 months.
  User is entitled to free repair service in insured warranty period if the warranty card is filled properly made with signature and dealer’s stamp, sold the instrument signed by the client that is aware of the warranty conditions and fiscal cash register receipt or invoice showing the date of purchase.
  Repairs are accepted only cleaned machines!
  Appliances should only be used appropriately and in accordance with the instructions.
  To ensure safe operation is required the customer to be familiar with instructions for use of power tool safety rules when working with it and its particular purpose. The unit requires periodic cleaning and proper maintenance.

Warranty does not cover:

• Wear of colored coating of tools;

• Parts and consumables, which are subject to wear caused by use such as: grease, oil, brushes, guides, rollers, pads, drive belts, flexible wire shaft, bearings, seals, piston with a hammer tackers, etc.;

• Accessories and supplies such as: handles, nose, batteries, cases, chargers, drills, cutting discs, chisel knives, chains, sandpaper, stops, polishing discs, chucks (grip, holder of the cutting tool) to cord reel itself cord for lawn mowers, etc.;

• Fusible fuses and bulbs;

• Mechanical damage to the hull and all external components of the device, including ornamental;

• Fuses eye fuses cutting tools, rubber plates, frames, rulers, etc.;

• Cord and plug;

• Overall damage to instruments caused by natural disasters such as fires, floods, earthquakes, etc.;
  The warranty is not valid in cases where:

• Inconsistent serial number of this article with a completed warranty card;

• The label is removed or completely missing one;

• Is attempting to unauthorized interference with unauthorized service base camp;

• Damage caused due to misuse (non instructions) of the device by the customer;

• Damage caused due to careless handling of the device;

• Damage to rotor or stator, consisting of the bonding between them, due to melting of insulation caused by the continuous overload;

• Damage to rotor or stator caused by overload or impaired ventilation, expressed in the change of the collector or windings;

• No protective disks, support panels or other components that are part of the structure of the instrument and are intended to ensure its safe and proper operation;

• The cord of the instrument is extended or replaced by the customer;

• Damage caused by overload or lack of ventilation and insufficient lubrication of moving components;

• Wear and tear bearings or blocked due to overloading, or powder;

• Broken bearing collar;

• Breach the integrity of the teeth of gears (broken, worn);

• Broken spline or bolting;

• Failure On/Off switch or electronic control caused by dust or breakage;

• Broken gear box (head) caused by the lock mechanism;

• Occurrence of abnormal clearance between piston and cylinder as a result of overloading or dust;

• Tightening between piston and cylinder as a result of overloading or dust;

• Damaged centrifugal wheel and brake (discolored) – due to work by a blocked brake;
  The deadline for a renovated adopted in electric service is within a month.
  Workshops are not responsible for the instruments are not contacted by the owners one month after the statutory period for repair!

www.raider.bg

EUROMASTER IMPORT-EXPORT LTD
1231, Sofia, Bulgaria, 246 Lomsko shose Blvd.,
tel.: +359 700 44 155
fax: + 359 2 934 00 90
www.euromasterbg.com; e-mail: info@euromasterbg.com

References

• EUROMASTER Import Export LTD.
• EUROMASTER Import Export LTD.
• Topmaster – Orodja za mojstre

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>