RAIDER JM28EUI-144Hz 28 144hz 4k Ultra Gaming User Manual
- June 2, 2024
- Raider
Table of Contents
28″ RAIDER 144Hz
4K ULTRA GAMING
Please read this manual thoroughly before use,and keep it handy for future reference
SAFETY INFORMATION
- Read these instructions – All the safety and operating instructions should be read before this product is operated.
- Keep these instructions – The safety and operating instructions should be retained for future reference.
- Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
- Follow all instructions – All operating and usage instructions should be followed .
- Do not use this equipment near water, or in humid environments-The appliance should not be used near water or moisture e.g. in a wet basement or near a swimming pool.
- Clean only with a dry cloth. Do not use solvents or petroleum based fluids .
- Do not block any ventilation openings .
- Do not install near any heat sources such as radiators, stoves or other apparatus (including amplifiers) that produce heat.
- Do not tamper with the supplied plug. This plug is a 851363 standard plug .
- Protect the power cord from being walked on or trapped, particularly at the plug and at the point where it exits from the appliance.
- Only use attachments/accessories specified by the manufacturer .
- Use only with a cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart or stand is used, use caution when moving it to avoid any injuries or damage from it tipping over.
- Unplug the apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as if the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus or it has been exposed to rain or moisture, it does not operate normally or has been dropped.
- Please keep the unit in a well-ventilated environment.
- The monitor should only be connected to a mains power supply as rated on the back of the equipment.
- To prevent overload, do not share the same power supply socket with too many other electronic components.
- Do not place any connecting wires where they may be stepped on or tripped over.
- Do not place heavy items on the cable as this may cause damage.
- When removing from a socket hold by the plug and not the wires.
- Disconnect the power immediately and seek professional help if the plug or cable is damaged, liquid has spilt onto the set, if accidentally exposed to water or moisture, if anything accidentally penetrates the ventilation slots or if the set does not work normally.
- Do not remove the safety covers. There are no user serviceable parts inside.
- Trying to service the unit yourself is dangerous and may invalidate the product’s warranty. Only qualified personnel should service this apparatus.
- Donot block ventilation slots on the back cover. The monitor can be placed in a cabinet but ensure at least Scm (2″) clearance all around. Do not tap or shake the screen, this may damage internal components.
- WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and objects filled with liquids, such as vases, shall not be placed on the apparatus.
- WARNING: The wall plug socket is used as a disconnection device and should remain readily accessible.
- WARNING: The batteries shall not be exposed to excessive heat such as direct sunlight or fire.
AT FULL VOLUME, PROLONGED LISTENING MAY DAMAGE THE4 USER’S HEARING.
This warning sign is to warn of dangerous voltage inside the product.
CAUTION: To reduce the risk of electric shock, DO NOT remove the cover
(or back). No user serviceable parts inside. Refer servicing to qualified
service personnel.
This warning sign is to alert you of important instructions accompanying the
product.
WHAT’S INCLUDED
CONNECTIONS AVAILABLE ON THE MONITOR
- DC24 V
- HDMI1
- HDMI2
- DP
- USB-B
- USB-C
- USB-A
- USB-A
- AUDIO OUT
WALL MOUNTING
1E | Select signal source or Exit OSD |
---|---|
2 | Go Up on the Main OSD Menu increase the value of a selected item |
3 | Go Down on the Main OSD Menu and decrease the value of a selected item |
4M | Open the Main OSD Menu Select submenu |
5 | Turn the monitor on or Off |
INITIAL SETUP
Connect the monitor to a power outlet.
- Press the POWER button on on the monitor or to turn it on (The indicator will be blue)
- Connect the relevant cable to the corresponding input on the monitor. The source will be automa cally detected.
- To change between inputs, press the “Source” button on to enter the source menu. Use the“◄”and“► ” button to choose the input source between Auto Select, Type-C, DP, HDMI1 and HDMI2.
MENU OPTIONS
The menu for the monitor can be accessed by pressing the menu botton on on the
control panel.
This menu is separated into the following sub menus: Picture seting, Image
settng, Colour Temperature, OSD setings, Reset, and options, details of each
menu can be found in the following section
OSD MENU
A . Bri/ContrastBrightness: Change the brightness
value from 0 to 100
Contrast: Change the contrast ratio from 0 to 100
Black Level: Change the Black Level value from 0 to 100
Picture Mode: Change the picture mode to Standard/photo/movie/ game
DCR: Turn the Dynamic Contrast Ratio feature On or Off
Colour Gamut: Change the display color gamut value from 0 to 100
B . lmage Adjust Sharpness: Change the display
Sharpness value from 0 to 100 HDR: Turn HDR On or Off
Saturation: Change the display Saturation value from 0 to 100 Aspect Ratio:
Change the image aspect ratio to Wide Screen,4:3,1:1,Auto
Gamma: Change the display Gamma Value to:2.0,2.2,2.4
C . Color Temperature Color Temp.: Change the Color Temp
to 6500, 7500, 5800, 9300, sRGB, User
Red: Adjust red color effect
Green: Adjust green color effect
Blue: Adjust blue color effect
D . OSD Seting Language: Change the OSD Menu
display language
OSD H Position: Change the horizontal position of the OSD Menu
OSD V Position: Change the vertical position of the OSD Menu
Time Out: Change how long OSD Menu is on before it automatically exits
Transparency: Adjust transparency value from 0~100
E . Reset Reset: Press this function to
restore the original settings
KVM: Turn KVM On or OFF
DSC: Turn auto or off DSC
F . Other
SPECIFICATION
Model | 28″ RAIDER 144Hz 4K ULTRA GAMING |
---|---|
Screen Size | 28″ |
Aspect Ratio | 16:09 |
Backlight | LED |
Brightness | 400cd/m2 |
Panel Type | IPS |
Resolution | 3840×2160 |
Refresh Rate | 144Hz |
Response Time | lms |
Viewing Angle | 1789/1789 (CR>10) |
Contrast Ratio | 1000:1 |
VESA Mounting | 100x100mm |
Color | 1.07B |
AMD FreeSync | Yes |
G-Sync | Yes |
HDR | Yes |
USB-C Power Delivery | PD 65W |
MPRT | Yes |
Signal Input | HDMI1 + HDMI2 + DP1.4 + USB-C + USB-B + USBx2 |
Audio | out |
Speakers | 2x3W |
Power Cable | Yes |
DP Cable | Yes |
USB-C Cable | Yes |
USB A to B | Yes |
Low Blue Light | Yes |
Flicker Free | Yes |
Power | Typical ypical SOW |
Power Type | DC24V SA |