RAIDER RD-JBC15 Jump Starter User Manual
- June 1, 2024
- Raider
Table of Contents
RAIDER RD-JBC15 Jump Starter
Product Specifications:
- Model: RD-JBC15
- Output Voltage: 5V/2.1A (MICRO USB)
- Input Voltage: 5V/1A
- Starting Current: 300A
- Capacity: 6Ah
Product Usage Instructions
-
Checking Jump Starter Capacity:
Press the switch button to check the capacity of the jump starter. The number of solid indicator lights will indicate the battery capacity. -
Charging Indicator:
When charging, indicator lights will flash one by one. Full indicator lights will be solid when charging is paused or complete. -
LED Illumination:
Press the switch button for 3 seconds to start the LED illumination. Four modes of LED lights will appear in sequence: normal, strobe, SOS, OFF, with each light press. -
Jump Starting a Vehicle:
- Ensure the jump starter is charged
- Connect the red clamp to the positive (+) terminal of the vehicle’s battery
- Connect the black clamp to the negative (-) terminal of the vehicle’s battery
- Start the vehicle
FAQ :
-
Q: How do I check the battery capacity of the jump starter?
A: Press the switch button to check the capacity. The solid indicator lights will indicate the battery capacity. -
Q: What should I do if the indicator lights do not function properly during charging?
A: If you encounter issues with the indicator lights during charging, please contact our customer support for assistance. -
Q: How should I dispose of the jump starter when it is no longer usable?
A: According to European Guideline 2012/19/EC, dispose of unusable power tools separately and in an environmentally correct manner. Contact local authorities for proper disposal methods.
USER’S MANUAL
Original Instruction for Use
- Dear Users,
- Congratulations on buying a machine from the fastest growing brand for electric, gasoline and pneumatic machines – RAIDER. With proper installation and operation, RAIDER are reliable and reliable machines, and the work with them will bring you real pleasure. For your convenience, there is an excellent service network with 45 service stations all over the country.
- Before using this machine, please read this „Instruction for Use“ carefully.
- For the sake of your safety and to ensure proper use, read these instructions carefully, including the recommendations and warnings therein. To avoid unnecessary errors and incidents, it is important that these instructions remain available for future reference to anyone who will use the machine. If you sell it to a new owner, the „Instruction for Use“ must be handed over to the new owner so that the new user can read the relevant safety precautions and operating instructions.
- „Euromaster Import Export“ Ltd is an authorized representative of the manufacturer and owner of the trademark RAIDER. The address of the company‘s management is in Sofia 1231, 244 Lomsko
- Shosse Blvd., tel. 02934 33 33, 934 10 10, www.raider.bg; www.euromasterbg.com; e-mail: info@euromasterbg.com.
- Since 2006 the company has introduced the ISO 9001: 2008 quality management system with scope of certification: Trade, import, export and servicing of professional and hobby electric, pneumatic and mechanical tools and general hardware. The certificate is issued by Moody International Certification Ltd, England.
Technical data
| parameter | measure unit | value |
|---|---|---|
| Model | – | RD-JBC15 |
| output voltage | V | 5V/2.1A (MICRO USB) |
| input voltage | V | 5V/1A |
| starting current | A | 300 |
| capacity | Ah | 6 |
Usage
- This appliance is not intended for use by young or infirm persons without supervision.
- Do not use as a toy. Do not allow the appliance to become wet. Do not immerse the appliance in water. Do not use the appliance in explosive atmosphere. Do not modify or disassemble the appliance.
- Do not expose to heat. Charge only at ambient temperature 0°C and 60 °C.
- Press the switch button to check the capacity of jump starter.
- When charging indicator lights will flash one by one . The number of solid indicator lights indicates the battery capacity of the appliance. Full indicator lights are solid when charging is pause or complete.
- Led illumination
- Press the switch button 3 seconds to start the LED illumination and then the 4 modes of LED lights appear in sequence (normal, strobe, SOS, OFF) if you press lightly.
- For jump starter of 12V gasoline vehicle below 3000cc.
- Make sure that the number of indicator lights is not less than 3. Take the positive (+) battery from the car then connect the red battery clamp of the jumper cable to the vehicle positive (+) battery terminal and connect the black battery clamp of jumper cable to the vehicles negative(-) battery terminal.
- Plug the cord of jumper cable into the jump starter socket . Start the vehicle . When the vehicle starts remove the jumper cable from jump starter and disconnect the red and the black clamps to the vehicle battery terminals within 30 seconds.
- Do not start the vehicle current more than 300A. Remove the appliance from the vehicle within 30 seconds after the vehicle started, if not it may lead dangerous.
- When you do the operation of pulling out the jumper cable from the main unit – please use your finger to hold and push the main unit as shown on picture to the opposite direction to help you put out the jump cable.
- Charging:
- Plug the micro input to the universal socket. Connect 5V/1A input port of jump starter.
- Make sure the mobile electronic device is 5V powered.
- Connect the USB charging cable to the USB power port on the power bank.
- Choose the proper charger connector head for the mobile electronic device and plug it into the mobile electronic device charging port.
- Press the power button start to charge the electronic mobile device. Charge mobile electronic device.
- This appliance will power off automatically when no load or charging is complete.
ENVIRONMENTAL PROTECTION.
In view of environmental protection electrical appliances, additional accessories and packing must be subject to appropriate processing for reuse of the compound materials. According the European Guideline 2012/19/EC for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally correct manner.
EUROMASTER IMPORT EXPORT LTD
- tel.: +359 700 44 155
- fax: + 359 2 934 00 90
- www.euromasterbg.com;
- e-mail: info@euromasterbg.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>