Loocam PR1 Smart Button User Guide
- June 1, 2024
- Loocam
Table of Contents
Loocam PR1 Smart Button
Specifications
- Model: V6.W.02.L
- Compatibility: Requires Loocam Gateway
Product Introduction
The product is a smart button that requires the Loocam Gateway to function. It features a status indicator button, reset button, battery holder, and battery compartment cover.
Product Usage Instructions
Download Loocam App
Scan the QR code or search in the App Store or Google Play to download the
Loocam app.
Add Devices
- Connect WiFi to your phone.
- Follow the corresponding adding operation to add the gateway to the app.
- Enter the Gateway interface and select Add Sensor – Smart Button.
Pairing
- Open the smart button back shell and power on the device after removing the insulating sheet.
- Press and hold the Reset Button for about 5 seconds until the red light flashes, then release it.
- Press the button again to see the blue light flashing, indicating the device is in pairing mode.
Installation
You can place the smart button in common places, set up smart scenes with
other sensors, or use it as an emergency call button for the elderly.
Installation location can vary based on user requirements.
Note
- Reorient or relocate the receiving antenna if needed.
- Increase separation between equipment and receiver if facing interference.
- Do not make unauthorized changes or modifications to the product.
FAQ
-
Q: Can I use the smart button without the Loocam Gateway?
A: No, the smart button requires the Loocam Gateway to function properly. -
Q: How long does the battery last in the smart button?
A: The battery life can vary based on usage but typically lasts for several months before needing replacement. -
Q: What do the different indicator light colors signify?
A: The blue light indicates pairing/upgrading status, while the red light signifies resetting.
Quick Start Guide
Note: This product can not use alone and need to work with Loocam Gateway.
What’s in the Box
Product Introduction
Note: Pictures are for reference only, please refer to the actual product.
How to Use?
Download Loocam App
Scan the QR code below with your smartphone or search in the App Store or
Google Play to download Loocam app.
Add Devices
- Connect WiFi to your phone.
- Please follow the corresponding adding operation to add gateway to the App.
- Enter the Gateway interface and select “Add Sensor”— “Smart Button”.
- Open the smart button back shell (as shown in the picture), power on the device after taking out the insulating sheet.
- Press and hold the Reset Button for about 5 seconds until the red light flashes on the device and release it. Then press the button one more time and you will see the blue light flashes on the device. At this time, the device enters the pairing mode.
Important Notice : When replacing the battery, please use insulated tools to remove the battery. Do not use metal tools for prying the battery to avoid short-circuiting and damaging the motherboard.
Indicator Light Description
| Status | Color | Feature |
|---|---|---|
| Paring/Upgrading | Blue Light | Flash |
| Resetting | Red Light | Flash |
Installation
You can place the product in common places, set up smart scenes to work with other sensors or set it as an emergency call button to be placed around the elderly.
Installation location is for reference only, the specific usage location is subject to user requirements.
Note:
- After you turn on the emergency call button in the settings, you will can not set the smart scene for alarm ,and the button will no longer interact with other sensors too.
- When using smart scenes, you need to add other sensor devices to the gateway first, and then set up the smart button scene to be used in conjunction with other sensors.
- When you re-add the sensor to the gateway and the sensor has been triggered but no alarm push is received on the phone, please re-add the relevant sensors.
FCC
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
loocare@loocam.com
www.loocam.com
Responsible Part y:Ansjer Electronics Co., Ltd
Company name :Loocam Technology LLC
Address: 2205 Hutton Dr, Unit 100, Carrollton TX 75006
Tel: 657-223-3477
E-mail: lavenderl@loocam.com
Copyright 2022 © Loocam Technology LLC, All rights reserved. Apple and App
Store are trademarks of Apple Inc., registered in the U.S. and other
countries. Google and Google Play are trademarks of Google Inc.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>