Lifa Garden 30x34x9 Letterbox With Newspaper Roll Anthracite User Manual

: May 15, 2024
: Lifa GARDEN

Table of Contents

PACKAGE CONTENTS
SAFETY INSTRUCTIONS
GENERAL INFORMATION
USING THE PRODUCT
ASSEMBLY INSTRUCTIONS
MAINTENANCE
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Garden 30x34x9 Letterbox With Newspaper Roll Anthracite

Garden 30x34x9 Letterbox With Newspaper Roll Anthracite

PACKAGE CONTENTS

Mailbox
2x keys
4x screws
4x rubber stops
4x 6.5 mm wall plugs

SAFETY INSTRUCTIONS

Always take the following precautions before using the “Mailbox with newspaper compartment”, hereinafter referred to as the ‘product’

| REMARK!
Follow the instructions in the user manual!
---|---
| WARNING!
Warning for potential danger to life and/or serious irreversible injury!
| WARNING! Risk of suffocation
Warning for potential danger to life and/or serious irreversible injury!
| CE MARKING
Indicates that the product sold in Europe has been assessed to meet high safety, health, and environmental protection requirements.

GENERAL INFORMATION

Read the instructions for use carefully and keep them safe. If you give this product to other people, please also pass on this manual.
Only use this product in accordance with the instructions in this user manual.
This product is intended for domestic or similar use, not for professional use.
WARNING! Do not leave packaging material lying around carelessly.
This may become dangerous playing material for children.
Risk of suffocation!
WARNING! Danger because small parts may be swallowed.
The product contains small parts that could be swallowed. Keep this away from children under the age of 36 months.
GENERAL SAFETY INFORMATION AND INSTRUCTIONS
The product is not a toy. Keep it out of the reach of children and pets.
Do not allow unsupervised children to clean or maintain this product.
Prior to installation, check if the wall is suitable for carrying the capacity of the product. If necessary take corresponding measures to ensure stable and safe installation of the product.
Installation of the product must be done by two people to avoid injury or damage to the product.
Prior to use, check the product for visible external damage. Never operate the product if it is damaged.
Regularly check that all screws are tightened securely.
Do not place the product under any mechanical stress.
Please handle the product carefully. Jolts, impacts or falls, even from a low height, can damage the product.
Do not use the product in the immediate vicinity of heat sources such as naked flames.
Do not hang anything from the product.
The warranty will expire immediately if the product is damaged as a result of not observing this user manual. The manufacturer accepts no liability for damage caused by non-compliance with the user manual, negligent use or use which does not comply with the conditions of this user manual.
Do not attempt to disassemble or repair the product or modify it in any manner.

USING THE PRODUCT

Open the packaging carefully before taking out the product. Make sure the product is complete and undamaged. If any
components are missing or damaged, contact the vendor and do not use the product. Retain the packaging or recycle it in accordance with local regulations.

ASSEMBLY INSTRUCTIONS

Installation must only be carried out by qualified personnel. Incorrect assembly can result in severe personal injury and damage.

If you intend to install this product yourself, you must check for installations such as electrical wiring and plumbing that may be buried inside the wall. The installer is responsible for verifying that the wall will safely support the total load of the product.

Additional tools (not included) are required for installation.
Do not over-tighten screws.
Use an electronic stud finder to check the wall before drilling and mounting.
Ensure the wall can bear the weight of the product.
Assemble the product according to the assembly instruction steps and images. Scrupulously follow the assembly steps.

Choose a covered location for the product, for example at the front of your house, near the driveway or along paved areas of your home.
Hold the product against the wall with the help of a spirit level to ensure the product is straight and levelled.
Once the product is positioned in your desired height and location and levelled, mark where the holes need to be drilled through the back holes of the product.
When you are satisfied with the markings, move the product away and place it away in a safe place.
Before drilling make sure there is no electrical wiring and/or plumbing buried inside the wall.
Drill into the wall with a 6.5 mm masonry drill where the markings are.
Gently hammer the wall plugs into the drilled holes in the wall.
Attach the rubber toppers between the product and wall plugs and screw the product onto the wall. Tighten the screws until the product is securely attached to the wall.

MAINTENANCE

Wipe with a damp cloth using a mild detergent and dry thoroughly with a dry cloth. Do not use foreign objects or abrasive cleaning solvents to clean the product. This causes stains and other damage.

All contents and specifications mentioned in this manual are subject to change without prior notice.

Dispose of the packaging materials and product in accordance with current local regulations. You can ask your local competent council about the location of your nearest collection point.

Maintenance