Loocam 18 Port Gigabit PoE Switch User Guide
- May 15, 2024
- Loocam
Table of Contents
Loocam 18 Port Gigabit PoE Switch
Specifications
- Model: 18-Port Gigabit Desktop Switch with 16-Port PoE
- Standards: IEEE802.3a, IEEE 802.3af/at, IEEE 802.3az, IEEE802.3x
- Interface: 2x 10/100/1000Mbps Uplink Port, 16x 10/100/1000Mbps RJ45 PoE Port; AUTO MDI/MDIX
- Network Media: 10BASE-Te UTP category 3, 4, 5 cable (Max 100m), 100BASE-TX UTP category 5, 5e cable (Max 100m), 1000BASE-T UTP category 5, 5e, 6 or above cable (Max 100m)
- Transmission Rate: Ethernet: 10Mbit/s (Full Duplex), Fast Ethernet: 100Mbit/s (Full Duplex), Gigabit Ethernet: 1000Mbit/s (Full Duplex)
- PoE Port (RJ45): Port 1 – Port 16
- PoE Power: Up to 156W for all PoE ports, Up to 30W for each PoE port
- MAC Address Table: 2K entries
- Switching Capacity: 36Gbps
- Forwarding Rate: 26.7Mpps (64-byte packet size)
- Buffer Memory: 128kb, Packet Buffer: 9 kb
- Architecture: Store-and-Forward
- Power Supply: External Power Adapter (Output: DC 100-240V 50/60Hz 52V/3A)
- Dimensions: 12.2 x 3.7 x 1.1 in (310mm x 30mm x 97mm)
- Weight: 1.7 lbs (750g)
Product Usage Instructions
This Gigabit PoE Switch supports IEEE 802.3 af/at standard allowing connection of PoE cameras, AP devices, and non-PoE devices compliant with this protocol for data transmission. It automatically detects device connections, restarts devices, and restores the network.
Overview
This is a 18-port Gigabit PoE switch. It has 16 10/100/1000Mbps RJ45 PoE ports and 2 10/100/1000Mbps RJ45 UPLINK port which is compliant with IEEE 802.3 af/at PoE power supply standard. The PoE ports can transfer power and data to the device via Ethernet cable, the uplink port can connect router, PoE switch, NVRs and other devices via Ethernet cables. The product also supports IEEE 802.3az energy-efficient Ethernet, so the PoE ports can automatically adjust the power according to the actual traffic.
This product supports IEEE 802.3 af/at standard, so it can connect PoE cameras, AP devices and non-PoE devices that are comply with this protocol for data transmission. And it can also automatically detect the connection of the device, restarting the device and restore the network. QoS is suitable for videos and audio transmission or other large data transmission and can avoid transmission congestion caused by too much data in a short period of time during large data transmission.
Highlights:
- Working with IEEE 802.3 at/af standard.
- Support PoE Power up to 30W for each PoE Port.
- Support IEEE 802.3x, Full Duplex data control and back panels half-duplex data control.
- Support IEEE 802.3az, energy-efficient Ethernet.
- Supports 16 10/100/1000Mbps RJ45 port.
- Support 2K MAC Address Table.
- AUTO MDI/MDIX.
Specifications
| Model | 18-Port Gigabit Desktop Switch with 16-Port PoE |
|---|---|
| Standards | IEEE802.3、IEEE 802.3af/at、IEEE 802.3az、IEEE802.3x |
Interface
| 2×10/100/1000Mbps Uplink Port； 16×10/100/1000Mbps RJ45 PoE Port; AUTO
MDI/MDIX
Network Media| 10BASE-Te UTP category 3, 4, 5 cable (Maximum 100m) 100BASE-TX
UTP category 5, 5e cable (Maximum 100m)
1000BASE-T UTP category 5, 5e, 6 or above cable (Maximum 100m)
Transmission Rate| Ethernet: 10Mbit/s (Full Duplex)
Fast Ethernet: 100Mbit/s (Full Duplex) Gigabit Ethernet: 1000Mbit/s (Full Duplex)
PoE Port (RJ45)| PoE Ports: Port 1 – Port 16
PoE Power up to 156W for all PoE ports PoE Power up to 30W for each PoE port
Mac Address Table| 2K
MAC Address Learning| Auto-Learning, Aging
Switching Capacity| 36Gbps
Packet Forwarding Rate| 26.7Mpps (64-byte packet size)
SRAM| 128kb
Jumbo Frames| 9 kb
Forwarding Mode| Store-and-Forward
External Power Supply| External Power Adapter (Output:DC 100-24V 50/60Hz
52V/3A)
Dimensions (W×D×H)| 12.23.71.1 in (310mm30mm97mm)
Weight (g)| 1.7Ib (750g)
Environment| Operating Temperature：-10°~55°；
Operating Humidity: 10% ~ 90%RH, non-condensing；
FAQ
What is the maximum PoE power supported on each port?
What is the maximum PoE power supported on each port?
Can this switch automatically detect connected devices?
Yes, the switch can automatically detect device connections and restart devices as needed.
What is the switching capacity of the switch?
What is the switching capacity of the switch?