Loocam 10 Port PoE Switch
- June 14, 2024
- Loocam
Table of Contents
Loocam 10 Port PoE Switch
Product Information
Overview
This is a 10-port PoE switch. It has 8 10/100Mbps RJ45 PoE port and 2
10/100Mbps uplink port, which is compliant with IEEE802.3 at/af PoE power
supply standard. The PoE ports can transfer power and data to the device via
Ethernet cable, the uplink port can connect router, PoE switch, NVRs and other
devices via Ethernet cables. The product also supports IEEE 802.3az energy-
efficient Ethernet, so the PoE ports can automatically adjust the power
according to the actual traffic.
This product supports IEEE 802.3 af/at standard, so it can connect PoE cameras, AP devices and non-PoE devices that are comply with this protocol for data transmission. And it can also automatically detect the connection of the device, restarting the device and restore the network. QoS is suitable for videos and audio transmission or other large data transmission and can avoid transmission congestion caused by too much data in a short period of time during large data transmission.
Highlights
- Working with IEEE 802.3 at/af standard.
- Support PoE Power up to 30W for each PoE Port.
- Support IEEE 802.3x, Full Duplex data control and back panels half-duplex data control.
- Support IEEE 802.3az, energy-efficient Ethernet.
- Support 8 10/100Mbps RJ45 port.
- Support 2K MAC Address Table.
- AUTO MDI/MDIX.
Specifications
| Model | 10-Port 10/100 Mbps Desktop Switch with 8-Port PoE |
|---|---|
| Standards | IEEE802.3、IEEE 802.3af/at、IEEE 802.3az、IEEE802.3x |
Interface
| 8×10/100Mbps RJ45 PoE Port; 2×10/100Mbps uplink port； AUTO MDI/MDIX
Network Media
| 10BASE-Te UTP category 3, 4, 5 cable (Maximum 100m) 100BASE-TX UTP category 5, 5e cable (Maximum 100m)
Transmission Rate
| Ethernet: 10Mbit/s (Full Duplex)
Fast Ethernet: 100Mbit/s (Full Duplex)
PoE Port (RJ45)| PoE Ports: Port 1 – Port 8 PoE Power up to 96W for all PoE
ports PoE Power up to 30W for each PoE port
Mac Address Table| 2K
MAC Address Learning| Auto-Learning, Aging
Switching Capacity| 1.6 Gbps
Packet Forwarding Rate| 3.8 Mpps (64-byte packet size)
SRAM| 128kb
Jumbo Frames| 9 kb
Forwarding Mode| Store-and-Forward
External Power Supply| External Power Adapter (Output:DC 100-24V 50/60Hz 48V
/2A)
Dimensions (W×D×H)| 197×97×30.25mm
Weight (g)| 505g
Environment|
- Operating Temperature：-10°~50°；
- Operating Humidity: 10% ~ 90%RH, non-condensing；
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>