IRIS Rechargeable Mattress Cleaner User Manual

Rechargeable Mattress Cleaner
by IRIS USA, Inc.
Series IC-FDC1U

Thank you for your purchase. Please read this instruction manual carefully to ensure proper use. Read all safety precautions prior to use. Please store this instruction manual in a safe place for future reference.
READ AND SAVE THESE INSTRUCTIONS

SAFETY PRECAUTIONS

When using an electrical appliance, basic precautions should always be followed. Please read the manual before use and carefully follow all safety precautions to avoid injury or property damage and to reduce the risk of fire or electrical shock. Save the instructions in a safe place for later use.
Graphic Symbol Indications: Indicates content that could lead to death or injury if handled incorrectly.

| |
---|---|---
CAUTION| PROHIBITED| INSTRUCTIONS THAT MUST BE FOLLOWED

IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE)

WARNING – To reduce the risk of fire, electric shock, or injury:
a . Do not leave the appliance when plugged in. Unplug from outlet when not in use and before servicing.
b . Do not allow to be used as a toy. Close attention is necessary when used by or near children.
c . Use only as described in this manual. Use only the manufacturer’s recommended attachments.
d . Do not use with damaged cord or plug. If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
e . Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners.
Do not run appliance over cord. Keep cord away from heated surfaces.
f . Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.
g . Do not handle plug or appliance with wet hands.
h . Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
i . Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
j . Turn off all controls before unplugging.
k . Use extra care when cleaning on stairs.
l . Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
m . Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
n . Do not use without a dust bag and/or filters in place.
o . Do not use outdoors or on wet surfaces.
SAVE THESE INSTRUCTIONS

Disassembly prohibited.

• Do not disassemble, repair, or modify. Doing so can cause fire, electric shock, or injury.
• Repair by persons other than trained repair technicians can be dangerous.

Product use.

•  For household use only. Do not use it for commercial use. Do not use the product for anything other than its intended use. Doing so could cause the product to malfunction or cause a fire.
• Do not use the product outdoors.
•  Before use, make sure that the filter is installed correctly. Use only manufacture recommended filter.
•  Please do not splash or immerse the vacuum in water.
•  Do not use near water or in spaces with high humidity levels, such as bathrooms.
• Please do not clean large amounts of litter/debris in one pass to avoid blocking the intake port and decreasing suction.
• Do not use to clean liquid or damp materials as this may cause a short circuit, electrical shock or breakage.
• Pick up the device by the handle to avoid risk of dropping and property damage.
• Do not run the vacuum for extended periods of time.
•  Do not drag the device as this may damage the floor.
•  Do not drop, break, hit against other objects, or put pressure on the vacuum.
•  Please do not splash or immerse the vacuum and battery in water.
• Please do not use it while the unit is charging. Unplug the unit prior to use. (Improper uses could cause injury, property damage, deformation, etc .)

Cleaning and replacement parts.

• Please change any replaceable parts per manual directions.
• Please clean the dust off the device regularly to avoid buildup resulting in poor insulation.
•  To avoid electrical shock, please remove the battery before changing replaceable pieces.
•  Please clean the contents out of the dust cap, and avoid collected dust splattering. (Parts of the mesh file should be cleaned in water .)
•  Do not use without the dust cup and/or filters in place.
• Please properly assemble the dust cup and place it into the device to avoid injury or product damage.
• Clean using a fully wrung cloth. See Cleaning and Maintenance for further instructions.

Use power plugs and power cords correctly.

•  Please charge the battery in a 120V AC outlet. Do not charge in a DC outlet or with an electric generator as this may cause fire or electrical shock.

• To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other).
  This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug.
  If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plugin anyway.

•  Please remove the plug from the outlet and remove dust or dirt regularly to avoid electrical shock or injury.

• Please be sure that the plug is tightly inserted into the power base to avoid electrical shock, short circuits, or fire.

• Please do not insert or pull the plug with wet hands to avoid electric shock, burn, or injury.

• Do not damage, modify, bend forcibly, pull, twist, pinch, or put heavy objects on the power cord. This may cause damage to the cord, fire, or electrical shock.

• Do not bundle and use the power cord. This may cause overheating of the cord or fire. Be sure to extend the power cord .

•  Do not use outlet or extension cords if they exceed power ratings.

Abnormalities and malfunctions can cause smoke, fire, or electric shock.
Stop use immediately, cut power, and unplug from the electric socket when abnormalities or malfunctions occur.
Examples of Abnormalities

• Abnormal sounds or odors.
•  Power plug or power cord becomes abnormally hot.
•  Loss of power, etc . when the power cord is moved.
• The product periodically stops during operation.
• Tingling sensation from electric current felt when the product is touched.
• Stop use and contact IRIS USA, Inc . customer service at 1-800-320-4747.

Avoid fire hazards.

•  Please keep away from heat as this may damage the vacuum and can result in a short circuit or fire.
•  Using the vacuum with a buildup of dust may result in overheating, product damage, breakage, or fire.
• Do not use or store the product in areas of high heat with temperatures reaching 104°F/40°C (near heaters, etc .) in case the vacuum becomes damaged, resulting in short circuits or fire.
• Do not spray or apply insecticide, hair spray, lubricant and etc.
•  Do not vacuum oil, gasoline, paint thinner, copy toner, or any other flammable things.
• Do not vacuum carpet cleaning soap, foam, or liquid.
•  Do not vacuum oil smoke or steam.
• Do not use near flammable substances (kerosene, gasoline, paint thinner, etc .), objects that have flames (cigarettes, incense, etc .), or combustible materials. Can cause fires.

Usage Cautions
Use only on cloth products such as mattresses, futons, pillows, carpets, sofas, etc.
Do not use to clean the following:

• Liquid, wet litter/debris, powder, broken glass, and sharp or pin-type objects.
• Do not use on floors, walls, or unupholstered furniture. Do not pull on the main body and avoid hitting walls or furniture.

Battery

• Please remove the battery when the unit is not in use.
•  Placing the battery into the water to avoid overheating may result in leakage or fire.
•  Please use only the manufacturer-recommended battery. Use of any other battery may cause a risk of fire.
• Only use the manufacturer recommended charger. Using another device to charge the battery may cause leakage, overheating, or other damage.
•  Dropping or pressing firmly on the battery may cause leakage, overheating, or other damage.
•  Battery may leak if misused, dropped, or damaged. Avoid contact, as this can cause irritation or burns. Flush with water. If battery liquid comes into contact with eyes, do not use your hands to wipe or rub. Flush eyes thoroughly with water and seek medical help.
• Do not use if battery or vacuum is damaged or modified as this may result in fire, explosion, or injury.
•  Please do not connect the power terminals to any other pieces of metal. (Do not connect batteries together using metal chains,  hairpins, etc . as this may cause leakage, overheating, breakage or fire .)
• Please do not splash or immerse the battery in water as this could cause a short circuit resulting from overheating.
•  To ensure that the safety of the product is maintained, please do not disassemble, repair or reassemble the battery on your own as this may cause leakage, overheating or breakage. If an issue occurs, please contact IRIS USA, Inc . Customer Service
• Do not expose the vacuum and battery to fire or temperatures above 265°F/130°C as this can cause the product to explode
• Please follow charging instructions carefully and within the optimal temperature range (41°F/5°C to 95°F/35°C) to reduce the risk of fire or damage.
• Be careful not to hold the menu button down when picking up or carrying the vacuum as this can cause the product to accidentally start and cause accidents.

PARTS

Cleaner Body

Collection Head

CHARGING BATTERY

WARNING
Do not charge the battery with another charger except the original brand.
Battery does not come fully charged. Please charge to full power before first use. The full charge will take approximately 3 .5  hours.
Please do not use the device while charging.

1. Please put the battery into the vacuum cleaner.
   Place the battery into the vacuum. Press the battery into the socket until you hear a clicking sound.
   *Failure to fully insert the battery into the socket will affect the operation and can result in injury or damage.
   Please insert the battery tightly and firmly into the socket until there is a clicking sound.

2. Plug the charger plug into the power outlet.

3. Insert the charger into a power socket.
   Please insert the charger into the power socket tightly and firmly.

• The Battery Level red indicator light means the product has started charging. 4. Battery is fully charged.
  The indicator light will shut off when done charging.
  • For first-time use or non-use for more than 6 months, please charge 2 or 3 times before use to achieve a full charge.
  • If more than 10 days since last use, charge before next use.
  • Continual charging will decrease charge hold time.
  • Charging and running time will vary due to temperature and operating conditions.
  • Charge between temperatures of 41°F/5°C and 95°F/35°C.
  Charging in too low or too high temperatures can cause decreases in working time or lengthening in charging time.
  • Charger will be warm. This is normal.

  5. Removing the battery.
     Press the battery release button and take out the battery.

HOW TO USE

CAUTION

Do not use this vacuum cleaner to clean the following objects:
Liquid, wet litter/debris, powder, broken glass, sharp or pin-type objects, sand or gravel, plastic bags.
Please do not clean large amounts of litter/debris in one pass to avoid blocking the intake port and decreasing suction.
Do not use on floors, walls, or furniture. Do not pull on the main body and avoid hitting walls or furniture.
Empty the dust cup after use to avoid decreased suction or issues with the sensor.

1.  Adjust the collection head angle.
   Please place the vacuum on the floor, then adjust the angle up and down by hand.
   • Please adjust the vacuum body to the horizontal position, which should be used for soft surfaces such as bedding.
   • The collection head is fastened in a horizontal position by a magnet to keep it in place during use.

2. Unlock.
   Hold the Menu ON/OFF button for 3 seconds, wait for the Safety Lock indicator to light up, then start cleaning as directed below.
   • Safety Lock will automatically lock again after one minute of non-use.
   • Device will not work when locked. Pressing the Menu ON/ OFF button to start when it is locked will cause the Safety
   Lock light to blink.

3. Start the product.
   Pressing the Menu ON/OFF button changes the mode.
   • Press the Menu ON/OFF button to change to High mod
   • Press the Menu ON/OFF button again to change to Low mode.

4. When finished cleaning.
   Press the Menu ON/OFF button to change the mode until the vacuum stops and the indicator light shuts off.
   • Device will automatically lock after one minute of non-use.
   • Please follow step 2 to restart.
   • Battery Level indicator light will blink when battery power is low.
   • When the battery runs out of power, the Battery Level indicator light will blink rapidly before shutting off, and the motor will stop. Please recharge.

Cleaning Bedding

1. Please spread out the bedding or mattress pad to lay flat  (no folds).
2.  Adjust the vacuum to the horizontal position.
3. When the device is in High mode, move back and forth every 10 seconds.
   Please do not forcefully press down the collection head. Adjusted to 90°, the device will not work.
   • Adjusted to the horizontal position, the collection head is fastened in place by a magnet.
   • When cleaning furniture, cushions, carpets, etc . with the collection head in between, the head is not locked in place and maybe unstable.

Dust Sensor
Dust and dust mite sensor works during use, and light indicates the amount of dust on the surface area.
*When cleaning carpets or other items with high dust levels, the indicator light will not turn green.

Bedding Sensor
Device will conserve power and decrease speed when both sensors lose contact with the object being cleaned.

CLEANING AND MAINTENANCE

CAUTION

Cleaning and maintenance must be done after removing the battery.
Please do not splash water on the vacuum body as this could cause damage.
Use a diluted neutral cleaning agent.
Use of strong cleaning agents such as amyl acetic ester, alcohol, oil, etc . can cause fading, deformation, or breakdown.
Using the product in dusty condition can cause it to malfunction. Check and clean the product regularly.

Vacuum Body
Fully wring out a rag and use it to wipe down the body and any remaining cleaner.

Battery
Please use a dry rag on the terminal parts of the battery to clear out accumulated dirt which can disrupt product use.

• Incorrect assembly of the mesh filter and dust cup can allow dust and dirt inside which can damage the terminals.

Dust Indicator Sensors
Remove the dust cup and clean both sides of the sensors with a cotton swab.

•  Please clean regularly to avoid dust buildup, causing the sensor to function poorly.

Collection Head

• Clean hair, string, and other small objects from the dust intake port using tweezers to prevent dust buildup and decreased suction. Please clean it regularly.
• Please clean dirt on the agitator with a brush.
• Please clean bedding sensors with a cotton swab.
• Clean regularly to prevent dust buildup causing sensors to function poorly.

Mesh Dust Filter
Please clear and clean regularly to maintain higher suction capabilities

1. Remove the dust cup.
   Press the buttons on either side of the dust cup to remove it.

2. Remove the mesh filter in water.
   To avoid splattering of dust, please remove the mesh filter from the dust cup in water.

3. Clean the mesh filter.
   Remove the dust stuck to the filter, then rinse the filter with running water.
   Soak the dust cup in water with a diluted cleaning agent for several minutes for easy removal of accumulated dust.

4.   Dry.
   Place the dust cup and filter in a well-ventilated area until fully dry.
   *When cleaning the mesh filter set, please do not use a washing machine or another heated device as this may cause product deformation.

5. Reassemble the mesh filter se t.
   Place the mesh filter set back into the dust cup.
   *Pay attention to the direction. CAUTION
   Please reassemble correctly to avoid damaging the product.

6.   Reattach the dust cup.
   Place the mesh filter set in the dust cup, and then place the dust cup back into the vacuum body until you hear it click into place. Please verify that both buttons are clicked firmly in place.![IRIS Rechargeable Mattress Cleaner

• . Reattach the dust](https://manuals.plus/wp-content/uploads/2021/08/IRIS- Rechargeable-Mattress-Cleaner-.-Reattach-the-dust.jpg)

REPLACEABLE COMPONENTS

Please follow the instructions below for replacing the mesh dust filter, mesh exhaust filter, and battery.

Dust Filter Replacement
*Please see Cleaning and Maintenance (P9) for how to remove the filter set.

1.   Remove the dust filter.
   • Press the filter frame with fingers.
   • Pull the filter button out of the hole and the filter away from the frame.

2. Insert new dust filter.
   • Insert the joint jaw of the new mesh filter into the frame.
   • Press the filter button into the frame until it clicks into place.

Exhaust Filter Replacement

1.  Remove exhaust filter cover.
   • Use a coin to pull out filter covers on both sides.

2. Change exhaust filter.
   • Remove filters from both sides and insert new filters.

3.  Replace filter cover.
   • Put both filters covers back into place.![IRIS Rechargeable Mattress Cleaner

• Exhaust filter cover](https://manuals.plus/wp-content/uploads/2021/08/IRIS- Rechargeable-Mattress-Cleaner-Exhaust-filter-cover.jpg)

Battery Replacement

1. Remove the battery.
   • Remove the battery by pressing the battery release button.

2.  Assemble the new battery.
   • Insert the new battery facing correctly until it clicks into place. Failure to do so could result in the battery falling out and breaking.

Battery Disposal

Replace the battery as instructed above. Please dispose of old batteries according to proper governmental regulations.

SPARE PARTS

Please purchase replacement parts from IRIS USA, Inc.

Mesh Dust Filter, (3 PC)
Should be replaced every 6 to 12 months depending on the frequency of use.
If broken or damaged, please replace.
Model number: CF-FS1

Exhaust Filter, (4 PC)
Should be replaced every 2 years. If broken or damaged, or if poor ventilation or abnormal odors occur, please replace.
Model number: CF-FH1

Battery
Should be replaced when operating time greatly decreases.
If broken or damaged, please replace.
Model number: CBN-1420WP (white)
CBN-1420B (brown)

TROUBLESHOOTING

Before making repairs, please read the following content carefully to fix common problems.

place.
Device is connected to the charger.| Please unplug the charger.
Still in Safety Lock mode.| Please hold the Menu ONOFF button for 3 seconds to unlock.
Low suction| Battery power is low.| Please charge the battery.
Filter is clogged.| Please clean or replace.
Dust cup is clogged.| Please remove dust.
Won’t charge| Charger is not plugged into the power
outlet| Please make sure the charger is plugged in.
Charger plug isn’t fully plugged into the charging port.| Please make sure the charger is firmly in place.
Battery not assembled co dirty| Please make sure the battery clicks into place.
| Please remove the battery and clean terminals with a rag.
Stops during operation| Battery is dirty.
Battery Leal fight is OH while
running| Charging time varies based on conditions and lengths of use.
Charging may take up to 5 hours
If charged for more than 5 hours and the indicator light is still on, please contact IRIS USA, Inc. customer service.
Decreased running S on full battery| Device was charged ii a high-temperature area.| Please charge in recommended temperature conditions.
Battery has lost the ability to hold a charge.| Please replace the battery.
Vacuum and charger heat up while
charging| Temperature rise is caused by the current. This is normal.
Vacuum body heats up while running| Temperature S is caused by the battery heating up from use. This is normal.
Not running, but the dust sensor is on| The sensor is coated in dust.| Please clean the sensor (1,8).
Running, but dust seism is off| Significantlylowersuction.| Please clean or replace the filter and empty contents from the dust cup.

Problems that could not be resolved.
Please contact the dealer of purchase or IRIS USA, Inc . Customer Service.
Warning: Do not disassemble, repair or modify the product yourself. Any other servicing should be performed by an authorized service representative.

SPECIFICATIONS

PRODUCT SIZE
(NOT INCLUDING THE POWER CORD)| OPERATING| 10.0 x 17.7 x 6.2 in
254 x 449 x1 58 mm
STORED| 10.0 x 6.0 x 18.0 in
254 x 153 x 458 mm
PRODUCT WEIGHT| About 4.6 lbs / 2.1 kg (body and battery)
WORKING TEMPERATURE RANGE| 32°F/0°C – 104*F/40°C
DUST CUP CAPACITY| 6.8 oz / 0.2 L
CHARGER MODEL NUMBER| YLS0241A-T200120
CHARGER MANUFACTURER| Dongguan Yinli Electronics Co., Ltd.
CHARGER POWER| INPUT| AC100-240V 50/60Hz 0.8 A
OUTPUT| DC2OV 1.2 A
CHARGING CORD LENGTH| About 70.8in / 1.8m
BATTERY| Ni-MH battery (CBN-1420WP or CBN-1420B)
BATTERY CAPACITY| SC2,000mAh
BATTERY LIFESPAN| About 300 times (full charges)
CHARGING TIME| About 3.5 hours
RUNNING TIME| About 20 minutes (full power/new battery/68°F/20°C)
ITEMS INCLUDE (INCLUDED IN UNIT)| Vacuum, charger, battery (1 PC)

MANUFACTURER 1-YEAR WARRANTY

THE MANUFACTURER WARRANTS
Your IRIS USA, Inc . products are to be free from defects in material and workmanship under normal non-commercial, household use, when operated and cared for in accordance with the Manufacturer’s written instructions provided.
THE 1-YEAR WARRANTY (“WARRANTY”) DOES NOT COVER
Any damage caused by accident, misuse, or abuse, including without limitation, damage caused by use in a humid area, improper cleaning, neglect, alteration, fire, theft, non-recommended temperature use and does not apply to minor imperfections, scratches,  stains, discoloration, surface markings as a result of shipping or other damage to external or internal surfaces which does not impair the utility and/or functionality of the product.
TO OBTAIN SERVICE
If service should be necessary, you should contact IRIS USA, Inc . Customer Service (“Customer Service”) at 1-800-320-4747.
You may then return the properly packaged product(s), (using adequate packing and shipping material to prevent damage in transit), with postage prepaid along with the name, address, telephone number, model number, and proof of date of purchase (a copy of the receipt) and a detailed description of the claimed defect. This warranty shall not cover any damage incurred to the products during transit to Customer Service. You shall have the obligation and responsibility to pay for all services and parts not covered by the warranty.
MANUFACTURER’S OBLIGATION
The Warranty may not be altered, expanded, extended, revised or varied except by a written instrument executed by the Manufacturer.
THE MANUFACTURER’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT(S) AT THE MANUFACTURER’S SOLE AND EXCLUSIVE  OPTION. THE MANUFACTURER WILL REPLACE ANY ITEM FOUND TO BE DEFECTIVE IN MATERIAL OR WORKMANSHIP WITH THE MOST COMPARABLE CURRENT ITEM. IRIS USA, INC. DOES NOT ACCEPT SPECIAL REQUESTS, NOR DO WE HAVE THE ABILITY TO UPGRADE IN EXCHANGE FOR MONEY. THE  MANUFACTURER SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,  WHETHER DIRECT OR INDIRECT. THE WARRANTIES SET FORTH HEREIN ARE EXCLUSIVE  AND NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE ARE MADE WITH RESPECT TO THE PRODUCTS.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation exclusions may not apply. This Warranty gives specific legal rights, and there may also be other rights that vary from state to state.
DISCONTINUED ITEM RETURNED
If the item returned is discontinued and is no longer available, IRIS USA, Inc . will automatically replace your item with the most comparable item currently manufactured.

Attn: Customer Service (Returns Department)
IRIS USA, Inc.
13423 West Cactus Road
Surprise, AZ 85379
©2019 IRIS USA, Inc . All rights reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>