EDIFIER e25HD Multimedia Speaker User Manual

Table of Contents

EDIFIER-e25HD-Multimedia-Speaker-FIG-1

Specifications

Battery Replacement

Slide the switch along the slot to the end.
Simultaneously rotate the battery compartment lid counterclockwise until the point icon is aligned.

How do I replace the battery?
To replace the battery, slide the switch along the slot to the end and simultaneously rotate the battery compartment lid counterclockwise until it aligns with the point icon.
Where can I find the EU Declaration of Conformity?
The full text of the EU declaration of conformity is available at the following internet address: EU Declaration of Conformity.

EDIFIER-e25HD-Multimedia-Speaker-FIG-2

Note:

Images are for illustrative purposes only and may differ from the actual product.
For the need of technical improvement and system upgrade, information and specifications contained herein may be slightly different from actual product. If any difference is found, the actual product prevails.

EDIFIER-e25HD-Multimedia-Speaker-FIG-3

Note:

EDIFIER-e25HD-Multimedia-Speaker-FIG-4

EDIFIER-e25HD-Multimedia-Speaker-FIG-5

The speaker detects the plug-in or plug-out of an AUX or fiber optic audio cable.

If an AUX audio cable (or fiber optic audio cable) is connected, the speaker will switch to AUX mode (or OPT mode) automatically.
If the AUX or fiber optic audio cable is plugged out, the speaker will switch to Bluetooth mode automatically.

EDIFIER-e25HD-Multimedia-Speaker-FIG-6

Note:

Pin code for connection is “0000” if needed.
To enjoy all Bluetooth functions of this product, make sure that your audio source device supports A2DP and AVRCP profiles.
If no device is connected in 30 minutes, the speaker will switch to Bluetooth hidden mode. In this mode, (1) new devices cannot find the speaker, but (2) for a device that exists in the pairing record of this speaker, you can select “EDIFIER e25HD” from its Bluetooth device list to reconnect. To exit from Bluetooth hidden mode, press the ” ” button on the speaker or the ” ” button on the remote control.
To disconnect from the current Bluetooth device, press and hold the ” ” button on the remote control for 1.5 seconds, or tap and hold the buttons of ” “, ” “, and ” ” on the active speaker for 3 seconds.

The volume levels of the speaker and your device are not synchronized. To adjust the volume levels, you can adjust separately.

EDIFIER-e25HD-Multimedia-Speaker-FIG-7

EDIFIER-e25HD-Multimedia-Speaker-FIG-9

Battery replacement

Slide the switch along the slot to the end and simultaneously rotate the battery compartment lid counterclockwise until the point indicator aligns with the ” ” icon.
Remove the battery compartment and insert a new battery into the battery compartment with its positive electrode outwards.
Put back the battery compartment lid and rotate it clockwise until the point indicator aligns with the ” ” icon.

For more information, please visit our website:

EDIFIER-e25HD-Multimedia-Speaker-FIG-10

To learn more about EDIFIER, please visit www.edifier.com
For EDIFIER warranty queries, please visit the relevant country page on www.edifier.com and review the section titled Warranty Terms.
- USA and Canada: service@edifier.ca
- South America: Please visit www.edifier.com (English) or www.edifierla.com (Spanish/Portuguese) for local contact information.