FiTORCH EA25 Compact Flashlight User Manual

June 1, 2024
FITORCH

FiTORCH EA25 Compact Flashlight

FiTORCH EA25 Compact Flashlight 

COMPACT FLASHLIGHT
3000 LUMENS MAXIMUM OUTPUT

Specifications

  • 3000 lumens maximum output and 250 meters maximum beam distance.
  • High performance LUMINUS SST70 LED.
  • High-transmitting optical glass with AR coating. 21700-5000mAh USB rechargeable battery.
  • Two-way clip.
  • Modes: Turbo-High-Medium-Low-Eco and Strobe & SOS.
  • Lock & unlock function
  • Beacon guidance function.
  • Power indication and low-voltage warning function.
  • Dimensions: φ26.2φ24.8L126.2MM
  • Weight: 75g(without battery)
  • Accessories Included: 1charging cable, 121700 USB rechargeable battery, 1 lanyard, 1 holster, 1* O-ring

EA25 Data

Mode Turbo High Medium Low ECO Strobe
OUTPUT 3000LM 800LM 300LM 150LM 10LM 3000LM
RUNTIME 2.6h 5.25h 14.2h 29h 227h
INTENSITY 15,577cd
DISTANCE 250m
IMPACT RESISTENCE 1m
WATERPROOF IPX-8

Note all datas above were generated in Fitorch lab.
Differences may happen basing on usage and conditions.

Operation

  • On/Off
    Click the side switch to turn on the light, and then press the side switch and hold on 0.5s to turn off the light.

  • Mode change:
    when power on, click the side switch to cycle through Turbo-High-Medium-Low- Eco-Low-Medium-High-Turbo.

  • Strobe & SOS:
    Double click the side switch to activate Strobe, and then double click the side switch again to enter SOS.

  • Lock & Unlock:
    When power off, press the side switch and hold on 5s until the LED blinks, and then the light is locked. Click the side switch 3 times or 4 times quickly, and then click the switch 1 time to unlock the light.

  • Power Detection:
    When the light is off, click the side switch 3 times quickly to activate the power detection function. The indicator light on the switch will blink to indicate the voltage. Each green blink indicates 1.0V, and each red blink indicates 0.1V.

  • Beacon Function:
    When power off, click the side switch 4 times to activate Beacon function.

  • Charging
    Take out Fitorch battery came with your flashlight, and then connect the charging port and the power source by charging cable. The indicator on the battery will be red during charging, and it will change to green after charging.
    Operation

Usage and Maintenance

  • Disassembling the sealed head will damage the lights and void the warranty.
  • High quality batteries are recommended.
  • O-ring will be wear after a Long-term use, change it In included spare one to maintain watertight seal.
  • Unload the batteries if assure the light won’t use a bit of long time, then better put It into Inner box(Built-in battery excluded).
  • Store and keep the light off fire, statics, steaming and humidity surroundings.
  • Clean the body with soft fabric clothing then lubricate In silicon grease per half a year.
  • Periodic cleaning of batteries contacts to improve the flashlight performance as dirty contacts cause the lamp flicking, shine intermittently or even fail to illuminate for below factors(Built-in battery excluded).
    A: Battery needs replacing ( choose the battery which mentions on this manual)
    B: PCB, Spring or other contacts is dirty (clean the contacts In cotton swab In soaked rubbing alcohol)

WARNING!

  • Looking at the light for a long time will harm your eyes. Don’t shine the light directly into anyone’s eyes.
  • The light will accumulate a lot of heat when used for extended periods, resulting in a high temperature of the light housing. Pay attention to safe use to avoid scalding.
  • Do not shine the light to an object at close range to avoid burning the object or causing danger due to high temperature.
  • The LED and battery of this light are not replaceable.

Warranty

  • 15 days replacement: Fitorch will replace identical or equal products with documented manufacturing defects within 15 days of purchase.
  • 5-year free repair: This light is non-detachable and enjoy the service of 5-year free repair of purchase if problems happen in normal use. Rechargeable battery enjoys 1- year warranty.

QR code| QR
code
---|---
Facebook| Website

Customer Support

ShenZhen Fitorch Electronics Technology Co., Ltd
Office Address:6F, Longsheng Commercial Building
Dalang St, Longhua new district
ShenZhen City, China
Tel: +86-755-2101-3606
Web: www.fitorchworld.com
E-mail: [email protected]

Logo

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

FITORCH User Manuals

Related Manuals