Schrader 33500 EZ-sensor Single SKU Programmable Snap In Fixed Angle Valve Tire Pressure Monitoring Sensor User Manual

Schrader 33500 EZ-sensor Single SKU Programmable Snap In Fixed Angle Valve Tire Pressure Monitoring Sensor User Manual

MOUNTING INSTRUCTIONS

• Tire mounting paste.

• Valve core torque tool.

• Rubber valve and valve puller.

• T-10 Torque Tool.

1. Lubricate and insert.

2. Pull the valve, making sure it remains parallel to the valve hole.

3. Position the sensor 180° from the mounting/dismounting head.

4. Install the tire.

5. Take out valve core.

6. Inflate tire until both beads are securely in place.

7. Insert valve core.

8. Inflate tire to recommended pressure

DISMOUNTING

1. Remove valve core

2. Position the valve at 90° from the bead breaker.

3. Place the valve under the mount/dismount head

4. Remove the screw and detach sensor body.

**Recycle

**

PROGRAMMING INSTRUCTIONS

This is a blank sensor (writable/empty).

Make/Model/Year info must be written with a compatible scan tool into sensor prior to installation. See second page for a list of compatible tools

Once programmed, install sensor onto the rim

Look up and perform relearn procedure

Family of Products

Service Pack Options

Black Anodized Aluminum Clamp-In Valve #34010

Aluminum Adjustable Angle Valve #20049

T-10 Screw 11.5 In lb (1.3 Nm)

Compatible TPMS Programming Tools*

Now offering TPMS tool and sensor bundles

• TECHRITEPRO

• TECH450PRO

• TECH550PRO

• TECH600PRO

• TECH1000

• TECH400PRO

• TECH300PRO

• TECH500

Scan to view full list

For training information, visit our webiste or scan the QR code

www.TPMSAcademy.co

Technical Support

USA | CA : 1.800.288.1804

MEX: SchraderMX@sensata.com

References

• Schrader Performance Sensor

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>