COOl FUN SYL-10B Electric Scooter User Manual
- June 12, 2024
- COOL FUN
Table of Contents
**COOl FUN SYL-10B Electric Scooter User Manual
**
PACKAGE CONTENTS
- 1 skateboard and remote
- 1 cable and power supply
- 1 user manual
SECURITY & ENVIRONMENTAL INFORMATION
Before your starting, familiarize yourself with how to operate, o that you can keep the skateboard in best condition.Otherwise you will get crashed fell down or lose control.
When you are learning the skateboard, make sure that all safely measres are
made. Like wearing a helmet, kneo pads, elbow pads and other protective gears.
Please wear appropriate clothes, Which this will help you to handle
emergencies better. Chack the condition of your product before each use. “The
product is not allowed o uso th lanes reserved for motor vehicles., When using
the product, you must respect local trafic laws, and give priority to
pedestrians.
It is recommended to use the cycle paths. We advise the elder and pregnant
women do not to use the product. The use of the product is prohibited below
-14 years old.
This device maybe used by persons with reduced physical,sensory or mental capabilities or lack of experience and knowledge, f they are properly supervised, or if the instructions for the use of the device safely were given to then, and f the risk were apprehended. Always sack before USA the correct charge of the battery (see charging section of the manual) Do not use after crinkling o taking narcosis. Do not carry objects while driving. The product is designed to carry one person at a time. Do not do acrobatics.
B aware of surrounding things fike sidewalks, bumps or uneven fioors. Do not
use the product on steps higher than 3em, on an ol surface, frozen, or on
damaged roads or with signage works. Do ot se the product under the rain or in
an environment with water, Avoid driving on steep siopes or in dark places.
When using the product, make sure your feet are always in the correat
position,
Do not start or stop suddenly, otherwise the battery and the product may be
damaged.
o prevent product damage.do not place the urit near water or objeats filed with fiuids. f a heavy object or iquid should fallon the device,have it checked by qualfied personnel before using it agan,
PRODUCT PRESENTATION AND DETAILS
The illustrations in this guide are for reference only and may vary from
the actual product.
It possesses fashionable appearance, simple operation, easy to control and
environment protection.
- Power Switch
- Skateboard battery indicator
- Charging port
- Rear wheels/Motor
- Deck
PRODUCT PRESENTATION AND DETAILS
LED Lights as indicator
Brake Modes
- Hard brake
- Strong brake
- Midium brake
- Gentle brake
Ride modes
- Pro mode
- Expert mode
- ECO mode
- Beginner mode
POWER SUPPLY
The charger supplied with the product is specific to the product. Using another charger may damage the product or cause accidents. Do ot touch substances leaking from the battery. Do not let animals and children touch the battery. Batteries contain dangerous substances, do not open the battery, do not insert anything into the battery. If the storage temperature is below 0 * G, do not charge the product. You can place it in a temperate environment (over 10° G) for charging. Do not leave the product charged unattended. Do not et the product charge more than 5 hours.
Waning!
Air transport of your product may be reguiated or prohibited because of the
lithium battery.
PRECAUTIONS OF USE
We are not responsible for the improper use of the product. Don’t use the
product in heavy vain or when the temperature is lower than -5 C or higher
than 45 C
HOW TO USE
LOAD THE PRODUCT
- Make sure the charging connector is clean and y.
- Start by plugging the switch into the power interface, then plug the other end of the charger into the product.
- When the red indicator lights up on the charger,t means that the charging is carried out correctly, i it s not the case, check al the connections of the cables.
- When the LED on the charger changes from red to green, the battery is fully charged. Stop loading. Too long charging time could affect the battery.
- When the remote-control battery is low, the connection indicator (7) flashes. Tum off the skateboard and charge the remote control.Do not use the product when the remote-control battery is low.
Remote control pairing and disintegration steps
-
Press the scooter power switch, then press and hold the power button for 3 seconds After the scooter indicator flashes once every 0.5 seconds, the scooter enters the pairing mode.
-
Press the remote control switch button to activate the remote control
-
There is a hidden button on the back of the remote control, Use a long neede to poke into the small hole and press it once to release for the *pairing. Don’t hold it for a long time, just release it after a short time.
-
The first light on the remote control flashes and the scooter power indicator light flashes, then the pairing is successful
Note: Long press the power button of the scooter, short press on the remote control
USE THE PRODUCT
- Make sure skateboard and remote control are fully charged before use, Tur on the skateboard and the remote control
- Stand on the skateboard, both feet apart,
- Push and hold the button (3) to accelerate siowly. Release slowy to slow down. Hold the button to stop. Use the body weight to turn,
- Side the *speed mode” button (4) to adjust the speed. It is recommended to se the “slow” speed when starting,
- Tum off the skateboard and the remote control when you are o longer using the produt, If you do ot tur off the device, it willremain on for 10 minutes. After 10 minutes without using the product, it will turn off automatically
CLEANING
Never disassemble the product to clean otherwise will void the product. Clean
the outside of the product with a damp cloth. Never use abrasive warranty.
Unplug the product from the wal outiet before cleaning the oth, scouring
powder or solvent such as alcohol or gasoine.
TROUBLE SHOOTING
Do not disassemble or modify the battery of the device. Refer all servicing to qualified personnel. Troubleshooting is necessary if the appliance has been damaged in any way: plug or power cord damaged, liquid spilled on the produat, introduction of smll objects in the product, exposure to rain or moisture, malfunctions, dropping the products.
GUARANTEE CONDITIONS
COOL&FUN available guarantee is valid for 1 years for your product and 3
months for ts accessories (power supply, cables…) ‘COOL&FUN guarantees your
products against any manufactuing or assembing faults. This guarantee only
apples o the first pLrchase of your product by the end user and is not
transferable If the device is resold. This warranty does not cover any
incompatibiites found by end user apart from recommendations specified on the
packaging. The quarantee doesn’t cover failures or defects induced by non-
compliance to this manual’s instructions, neglect, alteration, improper
instalation or maintenance, reparation or alteration not authorized by
COOL&FUN, improper testing, accident or external factors such as excessive
heat or humidity, power faiures or improper installation of the product (not
exhaustive). The only contractual obligation endorsed by GOOL&FUN pertains to
the reparation or replacement of a defective product, In any case, COOL&FUN
won’t be bound to any financial responsibilty for any amount exceeding the
value of the product purchased by the end user. This guarantee is wel defined
and cannot be modfied, decreased or increased without wiitten consent from
COOL&FUN. In addiion, GOOL&FUN cannot be held responsible for any technical
advice or service provided in relation to your product For any request not
covered by this guarantee, please contact GOOL&FUN support
PARAMETER
Outer packing size: 1050’330*170MM
Weight net: 7Kg(15.43L8S) P
Product size 970°265MM
Max speed: 22.25kmin (13-15MPH)
Max range: 14-16km (810 m)
Max capacity: 120KG (265185)
Certifcation: ce
Charging time: 3-ah
Battery: 4.08h
Motor power: 0.4KW
Ride up hill with an inciine of up to 15°
Maintanance contact informatiol
We have a professional team that provides warranty services and lfetime after-
sales consulting services for all our products. If you have any problems while
sing our products, please contact our customer service team in time. We will
reply you as soon as possible and provide you with a satisfactory solution.
FCC Statement:
“This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmfil
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. “This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC. Rules These limits are designed to provide
reasonable protection against harmful interference in a esidential
insallation. This equipment generates, uses and can radiate radio frequency
energy and, i not insalled and usedinaccordance with the instructions, may
cause harmiul interference to radio communications. However,there is no
‘guarant ee that interference will not occur ina particular instalation. I
this equipment does cause harmful interférence toradio or television
reception, which can be determined by turning the equipment offand on, the
user is encouraged to try o correct the intrference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that o which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’sauthority to operate the equipment. “This equipment complies with FCC radiation exposure limts set forth for an uncontrolled environm ent. This transmifter must not be co – located or operatingin conjunction with any other antenna or transmiter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>