COMMSCOPE SFG23RHDXL Sector Frame Line Card Installation Guide
- June 16, 2024
- CommScope
Table of Contents
SFG23RHDXL Sector Frame Line Card
1.0 GENERAL NOTES
1.1 ALL METRIC DIMENSIONS ARE IN BRACKETS [X.X] 1.2 FOR PATENT INFO:
https://www.cs-pat.com
2.0 DESIGN NOTES
2.1 ANY HAZARDS OR OBSTRUCTIONS TO THE CLIMBING FACILITY AND SAFETY CLIMB MUST
BE IDENTIFIED PRIOR TO INSTALLING THE APPURTENANCE. ADDITIONAL PRODUCTS MAY BE
REQUIRED TO MAINTAIN THE INTEGRITY OF THE SAFETY CLIMB. DURING INSTALLATION,
TEMPORARY AND/OR PERMANENT PRECAUTIONARY MEASURES SHOULD BE TAKEN TO PRESERVE
THE CLIMBING FACILITY AND/OR SAFETY CLIMB.
2.2 UP TO 5.0° TAPER AVAILABLE ON MODELS THAT SUPPORT ADJUSTMENT
3.0 MANUFACTURING/SPECIAL REQUIREMENTS
3.1 TIGHTEN ALL BOLTS SECURING FLAT PLATES BY THE TURN-OF-NUT METHOD. TIGHTEN
ALL U-BOLTS USING TURN-OF-NUT METHOD WITH ATTENTION TO LEAVE EQUAL DISTANCE
AND EQUAL FORCE ON EACH LEG OF THE U-BOLT.
4.0 TEST
5.0 PACKAGING
5.1 PACKAGING SHALL MEET COMMSCOPE REQUIREMENTS PER DOCUMENT IS-PL-3005.
5.2 PRINTED DOCUMENT TO BE PLACED INSIDE POLYBAG AND THEN IN SHIPPING
CONTAINER.
5.3 EXTRA HARDWARE MAYBE SUPPLIED, BAGGED AND SHIPPED.
REVISIONS
REV. | DESCRIPTION | DATE | APPROVED |
---|---|---|---|
A | INITIAL RELEASE | YMENG | |
08OCT23 | YW1047 |
40179448CMO
COMPONENT PART NUMBERS PROVIDED FOR ASSEMBLY PURPOSES;
INDIVIDUAL COMPONENTS MAY BE SHIPPED AS PARTS WITHIN AN INCLUDED KIT.
ITEM| PART NO.| DESCRIPTION| QTY.| WEIGHT| NOTE
NO.
---|---|---|---|---|---
1| SFG23180-00| ARM, STANDOFF, SFG23| 2| 120.07 LBS|
2| SFG2204| WELDMENT, BACK VERTICAL ARM MOUNT| 1| 97.29 LBS|
3| GB-05225| 5/8″ X 2-1/4″ GALV BOLT KIT| 14| 0.28 LBS|
4| SFG2380| WELDMENT, HD, TOP TAPER BRACKET| 1| 22.78 LBS|
5| SFG2381| WELDMENT, HD, LOWER TOWER LEG BRACKET| 1| 17.42 LBS|
6| SFG2289| G2 RRU BACK CLAMP, HD| 2| 18.65 LBS|
7| SFG2386| WELDMENT, SFG2 AZIMUTH BRACKET| 1| 10.69 LBS|
8| SFG2397-00| WELDMENT, G23 AZIMUTH BRACKET| 1| 8.56 LBS|
9| MT-382-18| 5/8″ X 18″ THREADED ROD| 8| 1.43 LBS|
10| GWL-05| 5/8″ GALV LOCK WASHER| 16| 0.03 LBS|
11| GN-05| 5/8″ GALV HEX NUT| 24| 0.08 LBS|
12| GUB-4355| 1/2″ X 3-5/8″ X 5″ GALV U-BOLT| 3| 0.71 LBS|
13| GWF-05| 5/8″ GALV FLAT WASHER, 1.7OD| 2| 0.06 LBS|
14| GUB-4352| 1/2″ X 3″ X 5-1/4″ GALV U-BOLT| 10| 0.71 LBS|
15| SAB01| FORMED CLAMP| 4| 1.35 LBS|
16| MT-379-8| 1/2″ X 8″ GALV THREADED ROD| 4| 0.45 LBS|
17| XAU01| ANGLE, CROSSOVER, 1.9-3.5″ X 1.9-3.5″ OD| 4| 2.98 LBS|
18| GB-04145| 1/2″ X 1-1/2″ GALV BOLT KIT| 2| 0.13 LBS|
19| GWF-04| 1/2″ GALV FLAT WASHER| 8| 0.04 LBS|
20| GWL-04| 1/2″ GALV LOCK WASHER| 10| 0.01 LBS|
21| GN-04| 1/2″ GALV HEX NUT| 10| 0.04 LBS|
22| XP-R| CROSSOVER PLATE, ROUND, UP TO 3.5″ OD| 2| 6.20 LBS|
23| MT546120120| PIPE, 2.875″OD X 120″| 2| 35.44 LBS|
24| MT546156276| PIPE, 2.875″OD X 156″| 2| 99.95 LBS|
25| SFG23100| LABEL, SFG23RHDXL| 1| 0.04 LBS|
26| XP-2525| CROSSOVER PLATE KIT, 2-7/8 OD X 2-7/8 OD| 8| 8.37 LBS|
27| MT-546-126| PIPE, 2.875″OD X 126″| 4| 61.05 LBS|
ACCESSORIES ORDERED SEPARATELY:
C 2023 CommScope, Inc. Confidential
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>