Bateria Power American Standard 110V Portable Mobile Power Supply User Guide
- June 3, 2024
- Bateria Power
Table of Contents
- Bateria Power American Standard 110V Portable Mobile Power Supply
- Product Overview
- Product Features
- Product Details Description
- Description of Port
- LED Screen Description
- Function Operating Description
- Product Electrcal Performance Index& Specification
- Reliability Testing & Standard
- Product Transportation Info
- Use Environment Note
- FCC statement
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Bateria Power American Standard 110V Portable Mobile Power Supply
Product Overview
Product profile
The product defined in this specification is American standard 110V portable
mobile power supply, which integrates portable energy storage power supply
system with multiple functional modes. The product has built-in high-
efficiency 32700 lithium iron phosphate cell, safe battery BMS management
system and high-efficiency energy conversion circuit, which can be placed
indoors or in cars. And can be used as home, office, outdoor emergency backup
power supply. Charging can choose mains electricity or solar power to charge
the product, without external adapter, the product is directly connected to
the mains power supply, charging capacity can reach 98% in 1.6 hours, to
achieve a real sense of fast
charging. The product system can provide rated 110V 1200W AC output, and is
equipped with 5V, 12V, 15V, 20V DC output and 15W wireless charging output to
meet the requirements of different scenarios. Meanwhile, advanced power
management system is configured to ensure long battery life and safety.。
Docs Release Notes
This document is mainly used for product research and development, production,
inspection, sales and product promotion. The customer acknowledges that this
document is issued after review and approval. If there is any amendment, the
latest version shall prevail.
Product Design Standard Ref
- IEC62133 lithium battery product safety requirements.
- UL1642 lithium battery pack safety requirements.
- UL2743 portable power pack safety requirements.
- EN55022 electromagnetic compatibility related.
- IEC60950-1:2005+A1:2009+A2:2013 safety standards.
- UN38.3 safety requirements for transport of lithium battery products international maritime dangerous goods code.
- Ambient temperature: 25℃, humidity: 45 ~ 75% RH, air pressure 86 ~ 106 KPa.
Product Features
- Compact, lightweight and Portability,Multiple Output Ports；
- Support mains and photovoltaic charging modes;
- Ac 110V, DC 5V, 9V, 12V, 15V, 20V and other voltage output;
- High-performance, high safety and high power 32700 lithium iron phosphate cell;
- Under voltage, over voltage, over current, over temperature, short circuit, over charge, overrelease and other system protection functions;
- Use large LCD screen to display power and function indication;
- Support QC3.0 quick charge function, support PD65W quick charge function;
- 0.3s fast start, high efficiency;
- 1800W constant power output;
- Larger Capacity and Higher Wattages
Product Details Description
Product appearance pictures
Product Process Specification
- Using engineering ABS+PC materials, rigid degree, shape the perfect curve.
- The surface of the shell is clean and clean, without scratches, deformation, and no front.
- Contact points of output and input interfaces have no corrosion, and the socket is suitable for tightness and smooth sliding cover.
- The joints between shells should be in close contact, and the visible gap width at the joints should not be greater than 1mm;
- The internal wiring layout is beautiful and neat.
- Foot pad is non-slip, shockproof, prevent smooth.
Description of Port
| No. | Item | Functional Decription |
|---|---|---|
| 1 | DC ON/OFF Switch | Turn on DC function，DC Output |
| 2 | Power Button | Click second to power on and Screen light up |
| 3 | Phone wireless charge switch | Turn On the wireless charge to charge phone |
| 4 | Wireless cell phone charging pad | 15W wireless cell phone pad charging |
| 5 | AC outlets protection | Slides up to open the AC outlet cover， |
| --- | --- | --- |
6
|
AC Outlet
| 12V AC Outlet，it can match Chinese，USA,Japan and European multiple standards
.three pure sine wave AC outlets
7| AC ON/OFF Switch| Turn on AC function，AC Output 1200W
8| TYPE-C Output Ports| 2 ports/ PD65W
9| Display Screen| Instructions follow the display screen
10| DC Car Port| 12V（Max 100W Output）
11| USB Output Ports| 5V 2.4A / 1 Port， QC3.0 /2 Ports
12| USB ON/OFF Switch| Turn on USB function
13| Solar Charge Port| XT60F（Port）Solar charging input（ support 26V-40V）
14| Fuse| Protector（15A overload protection）
15| AC Quick Wall Outlet| Insert AC power line ， Charge time：2.5hrs
LED Screen Description
No.|
LED Screen Displays
|
Function Profile
---|---|---
1|
Input Power
|
Display input wattage
2|
Cooling System Display
|
Display cooling system operation
3|
Output Power
|
Display output wattage
4/5
|
Hertz Display
| 50Hz（Click“POWER”Switch +AC Switch 3 seconds to Swtic h Frenquency
autermatic）
6|
Wireless Charge Display
|
Display the status of wireless charging
7|
Battery Percentage
|
100% battery input
8|
Alarm Display
|
Disply the malfunction and lightflash warning
9|
Power Input Display
|
Flashing while power charging
10|
DC ON/OFF Display
|
Display the status of DC switch operation
11|
USB ON/OFF Display
|
Display the status of USB port operation
12|
AC ON/OFF Display
|
Display the status of AC switch operation
Function Operating Description
Product charging
- Plug the power cord into the AC charging input port of the host power supply, or connect the solar panel to the XT60 port, and the display panel will blink incrementally from left to right. When all the 10 panels are on and the battery percentage is 100%, it means that the product is fully charged.
- When charging, pay attention to the power supply voltage must be the same as the required input voltage, otherwise it will cause overvoltage protection or mains trip.
Ac discharge
- Click the “POWER” button for 1S, and the screen lights up. Click the AC button, and the screen displays AC. At this time, insert the load line arbitrarily into the AC/110V output port (6), and the device can be used normally.
- Note: Please do not exceed the maximum output power of the machine 1200W. If the load exceeds 1200W, the power supply will enter the protection state and cannot output, and the buzzer alarm will be issued, and the alarm symbol will appear on the display screen. At this time, the load device needs to be removed, press any set of switches to remove the alarm, and the load power will be reduced to the rated power for normal use.
Dc discharge
- Press the “POWER” button for 1S, and the screen lights up. Press the “USB” button to display USB on the screen. Click the “DC” button to display DC on the screen. If a DC or USB function is not used, press the button for 1 second to disable it.
- QC3.0 port: it can charge devices that support fast charging.
- Type-c port: it can support CHARGING of PD65W fast charging device.
Hertz conversion
When the AC is off, hold down the “POWER” button and the AC button for 3
seconds to automatically sw
itch to 50Hz or 60Hz. The normal factory setting is 60Hz for the
Japanese/American and 50Hz for the Ch
inese/European.
Product standby and shutdown
- When all output DC/AC/USB/ wireless charging is off, the display enters hibernation mode for 50 seconds, and automatically shuts down within 1 minute, or long press “POWER” to shut down.
- If the output AC/DC/USB/ wireless charger are all turned on or one of them is turned on, the display will enter hibernation mode within 50 seconds, and the display will enter the steady state and will not automatically shut down.
Click the “POWER” button or the indicator button to turn on, and long press the “POWER” button for 3 seconds to turn off.
Product Electrcal Performance Index& Specification
Battery Pack
| No. | Item | Performance Index | Note |
|---|---|---|---|
| 1 | Cell Type | 32700 | LIFEPO |
| 2 | Single Cell Capacity | 6700mAh | |
| 3 | Battery Combination Mode | 7P7S | 7P 7S |
| 4 | Battery Rated Capacity | 328300mAh | All battery pack capacity |
| 5 | Battery Rated Power | 1050Wh | |
| 6 | Battery Rated Voltage | 22.4V | Declared voltage 3.2V |
| 7 | Release Cut-off Voltage | 19V | |
| --- | --- | --- | --- |
| 8 | Battery Internal Resistance | ≤10mR | AC testing internal resistance |
| 9 | Battery operating Temprature | -10～60℃ | |
| 10 | Lifecycle | 2000 cycles to 70%+ capacity |
Battery BMS Safety Management
| No. | Item | Performance Index | Note |
|---|---|---|---|
| 1 | Series Circuit Support | 7 series | |
| 2 | AC Charging Current | 110V7.2A/220V/3.6A/100V/8A（MAX） | |
| 3 | AC Release Current | 110V10.9A/220V/5.4A/100V/12A | |
| 4 | Monomer Overvoltage | 3.7V | |
| 5 | Responsive Time | 0.5S | |
| 6 | Overvoltage Reset | 3.65V | |
| 7 | Monomer Undervoltage | 2.2V | |
| 8 | Responsive Time | 2S | |
| 9 | Undervoltage Reset | 2.7V | |
| 10 | Short Circuit Protection | Its short circuit while Positive/Negative | |
| resistance less than 50mΩ， | |||
| 11 | Reset | Software delete | |
| 12 | Overcurrent Protection | 100A | |
| 13 | Responsive Time | 1S | |
| 14 | Reset | Software delete | |
| 15 | Charging Overtemperature Protection | 65℃ | |
| 16 | Recovery Temperature | 55℃ | |
| 17 | Release Overtemperature Protection | 65℃ | |
| 18 | Recovery Temperature | 55℃ | |
| 19 | Battery Equalization | 80mA | |
| 20 | Storage Temperature | One year：-20℃ to 35℃,(45-85%RH) | |
| Half year：-20℃ to 40℃,(45-85%RH) | |||
| --- | --- | --- | --- |
| Three month:-20℃ to 45℃,(45-85%RH) | |||
| 21 | Static Consumption Current | <0.15mA | |
| 22 | Product Weight | 14KG | |
| 23 | Operating Temperature | -10-40℃ | |
| 24 | Voltage Accurancy | 1% | |
| 25 | Current Accurancy | 1% | |
| 26 | Temperature Accurancy | ±3 | |
| 27 | SOC Accurancy | 8% |
Power Charging Supply
| No. | Item | Performance Index | Note |
|---|---|---|---|
| 1 | Multiple Input Ports | AC input/solar power input/Type-c input | |
| 2 | Recharge Mode Supply | Support wall input，Solar power input，PD-65W input | |
| 3 | Input Voltage Range | Wall input 110V，Solar power input 26V~40V ， PD3.25A | |
| 4 | Max Input Voltage | Wall input 110V，Solar power 26V~40V ，PD20V | |
| 5 | CV Voltage | 16.8V | |
| 6 | AC Max Charging Current | 110V/7.2A | |
| 7 | Max Charging Power | 800W | |
| 8 | Charging Time | 110V/2.5hrs wall input ，3hrs solar power input |
AC Release
| No. | Item | Performance Index | Note |
|---|---|---|---|
| 1 | Operating Mode | Click AC Switch（1S） ON/OFF | |
| 2 | Output Port | 3 Circuits in Parallel | |
| 3 | Output Wave | Pure sine wave | |
| 4 | Output Rated Voltage | 110V | |
| 5 | Output Rated Frenquency | 50Hz/60 Hz±1HZ(transformation) | |
| 6 | Output Voltage Range | 110～115V/ 10.9A MAX | |
| --- | --- | --- | --- |
| 7 | Output Rated Power | 1200W around 50mins | |
| 8 | Overpower Protection | 1800W | |
| 9 | Inversion Efficiency | >90% | |
| 10 | Output Short Circuit Proteciton | Available | |
| 11 | No-load Power Off | 50s go into sleep mode ，60s power off | |
| 12 | Overtemperature Protection | Temperature more than 65°,85℃overtemperature | |
| protection | |||
| 13 | Overtemperature Protection Reset | When temperature less than 60℃ to remove | |
| proteciton |
TYPE-C Release
| No. | Item | Performance Index | Note |
|---|---|---|---|
| 1 | Operating Mode | Click USB switch（1S） ON/OFF | |
| 2 | 协议 | PD3.0 | |
| --- | --- | --- | --- |
| 3 | Port No. | 2 | |
| 4 | Port Type | USB-C | |
| 5 | Output Power | 65W MAX | |
| 6 | Output Voltage/ Current | 5~20V/3.25A | |
| 7 | Efficiency | >90% | |
| 8 | Output Voltage Wave | <200mV | |
| 9 | Output Overcurrent Proteciton | 3.3±0.2A | |
| 10 | Output Short Circuit Protection | Available |
DC Release Performance
| No. | Item | Performance Index | Note |
|---|---|---|---|
| 1 | Operating Mode | Click DC switch（1～2S） ON/OFF | |
| 2 | 协议 | / | |
| 3 | Port No. | 1 | |
| 4 | Port Type | / | |
| 5 | Output Power | 100W | |
| 6 | Output Voltage/ Current | 12.5V 8A | |
| 7 | Efficiency | >90% | |
| 8 | Output Voltage Wave | / | |
| 9 | Output Overcurrent Proteciton | Available | |
| 10 | Output Short Circuit Protection | Available |
Wireless Release
| No. | Item | Performance Index | Note |
|---|---|---|---|
| 1 | Operating Mode | Press key（1S） ON/OFF | |
| 2 | 协议 | / | |
| --- | --- | --- | --- |
| 3 | Port No. | 1 | |
| 4 | Port Type | / | |
| 5 | Output Power | 15W | |
| 6 | Output Voltage/ Current | 15V/1.25A | |
| 7 | Efficiency | >90% | |
| 8 | Output Voltage Wave | / | |
| 9 | Output Overcurrent Proteciton | / | |
| 10 | Output Short Circuit Protection | / |
Display Screen
| No. | Item | Performance Index | Note |
|---|---|---|---|
| 1 | Display Content | Details please reference point 4 | |
| 2 | Display Type | LCD color screen 25*30mm | |
| 3 | ON/OFF Mode | 60s automitic | |
| 4 | Warning Tone | Available |
Product Safety
| No. | Item | Performance Index | Note |
|---|---|---|---|
| 1 | Port- Shell Insulation Resistance | ≥2MΩ 500Vdc | |
| 2 | AC Port-Shell Voltage Resistance | 2KVAC/50HZ 1min | |
| 3 | Other Ports -Shell Voltage Resistance | 500VAC/50HZ 1min | |
| No. | Item | Performance Index | Note |
| --- | --- | --- | --- |
| 1 | Heat dissipation | Bidirectional Air cooling | |
| 2 | Operating Noise | ≤5dB | |
| --- | --- | --- | --- |
| 3 | IPX Level | IP53 |
4
|
Operating Environment Temperature
| Charge ：0℃~40℃|
Discharge：-10℃~40℃|
|
Storage Environment Temperature
| -20~20℃ （12 months）| Keeps battery power
| | beteween 45%~55%
-20~40℃ （3 months）
5| | before storage，Please
| -20~60℃ （1 month）| charging power in time
| | after power off.
6| Operating Environment Humidity| 65±20%RH|
7| Operating Environment Humidity| 65±20%RH|
Reliability Testing & Standard
Testing Instrument
No.| I n s tr u me n t Name| E
q u ip m en t Standard| Note
---|---|---|---
1| Electronic load meter| Accuracy：Voltage 0.01V/ Current 0.01A|
2| DC| Accuracy：Voltage 0.01V/ Current 0.01A|
3| Humidity& Constant| Accuracy：Temperature deviation：＋/-5℃|
Testing Project
No.| T e sting item| T e s t i
ng Request & Standard| Note
---|---|---|---
1
| Room temperature charge-discharge performance testing| According to the requirements of charging voltage and charging current in the specification, each function should meet the requirements of the specification after two
cycles of charging and discharging
|
3
| Overdischarge safety performance testing| Use 110V port to discharge, the power is 1200W, from 100% electric discharge to automatic shutdown of the
product, and then charge the product to 100% electric, the function should be consistent with the specification.
|
4| Overcharge safety performance test| After charging the product to 100% with
AC power cord or solar energy board, continue charging for 12 hours, product
functions should be consistent with the|
| | specification.|
---|---|---|---
5
|
Low temperature charge- discharge performance test
| Under 0℃, according to the specification of charging voltage and charging current requirements, charge and
discharge two cycles, the function should meet the specification requirements.
|
6
|
High- temperature charge- discharge performance test
| In the environment of 40℃, according to the specification
of charging voltage and charging current requirements,
charge and discharge two cycles, the function should meet the specification requirements.
|
7
| High and low temperature storage performance testing| After 7 cycles of low temperature -5 ℃ and high
temperature 35 ℃ , the function of the product should meet the requirements of the specification
|
Product Transportation Info
| No. | Item | Performance Index | Note |
|---|---|---|---|
| 1 | Net Weight | 14KG | |
| 2 | Product Size | 366235266 mm | |
| 3 | Total Weight | ||
| 4 | Packing Size | 450320350 | |
| 5 | HS code | ||
| 6 | Container Qty | 20GP |
Product Packling List
| No. | Item | Accessories | Note |
|---|---|---|---|
| 1 | Power station | 1pc | |
| 3 | Wire | Adaptor wire * 1 | |
| 4 | Specification | Operation guide and warranty card |
Use Environment Note
No.| I t e m| T e c hn i ca l
Index
| Unit| Note
---|---|---|---|---
1
| ****
Operating Temperature
| ****
0-40
| ****
℃
| 1. Do not work in an environment higher than 40 ° C
2. It is recommended not to work in an
environment lower than 0℃
---|---|---|---|---
2| Storage Temperature| -5-35| ℃| Do not be used for a long time above 35 ℃
ambient temperature
3| relative humidity| 20%－90%| |
4| Heat dissipation| Air cooling| | If the temperature of the product is too
high, it will work normally after cooling down
- Please pay attention to the input and output voltage range when using this product. The input voltage and power range required by your device is not within the range of the energy storage power supply.
- The connection cables must be matched, because different load cables correspond to different equipment. Therefore, in order to normally use the energy storage power supply for your equipment, please use the original connection cable 3 with guarantee.
- The energy storage power supply needs to be stored in a dry environment. Proper storage method can prolong the service life of the energy storage power supply.
- If you do not use the product for a long time, please charge and discharge the product once a month to improve the service life of the product.
- Do not place the product in a place where the temperature is too high or too low
- High or too low ambient temperature will shorten the service life of electronic products and seriously damage the product shell
- Do not use corrosive chemical solvent to wipe the product surface stains can be swab with a small amount of anhydrous alcohol to scrub
- Please handle the product gently when using, do not fall down or disassemble violently
- There is high pressure in the product, do not disassemble by yourself, lest it may cause safety accident
- It is recommended that the device be fully charged for the first time to avoid inconvenience caused by low power. After the device is fully charged, the fan will continue to work for 2-5 minutes after the charging power cable is removed for standby heat dissipation (the specific time may vary with the scene temperature)
- When the fan is working, prevent dust particles or foreign matters from being inhaled into the device. Otherwise, the device may be damaged.
- After the discharge is terminated, the fan continues to work to lower the temperature of the device to a proper temperature for about 30 minutes (the time may vary with the scene temperature). When the current exceeds 15A or the temperature of the device is too high, the automatic power-off protection is triggered.
- During the charging and discharging process, connect the device to the charging and discharging device properly before starting the charging and discharging device; otherwise, sparks may occur, which is a normal phenomenon
FCC statement
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. During the operation of
device a distance of 15 cm surrounding the device and 20 cm above the top
surface of the device must be respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>