nathan james 15901 Ezra Wall Light Instruction Manual
- June 2, 2024
- NATHAN JAMES
Table of Contents
nathan james 15901 Ezra Wall Light
Product Information
Specifications:
- Product: Ezra Wall Light
- SKU: 15901
- Assembly Time: 20 minutes
- Warranty: Free Lifetime Warranty
- Power Requirement: 120V 60Hz AC Only
- Recommended Bulb: B12 or T20 with a maximum wattage of 60 (not included)
Product Usage Instructions
What’s Included:
| Description | Qty |
|---|---|
| Fixture | 1 |
| Marble Diffuser | 1 |
Safety Instructions:
Safety first, fun later. Follow these guidelines to ensure safe use of the
product:
- Do not modify the structure of the product.
- Use the light fixture responsibly with primary concern for safety.
- Inspect the product upon receipt and before each use.
- Avoid commercial use, leaving spilled liquid on the fixture, using if damaged, making temporary repairs, or using outdoors.
Installation Steps:
Pre-Installation:
Step 1: Remove the Mounting Screws (E) from the sides of the Fixture (1)
to separate it from the Mounting Plate (A).
Important Notes:
- Do not tighten bolts/screws completely until all are lined up.
- Avoid over-tightening to prevent stripping.
- Use hand tools for assembly, not power tools.
Frequently Asked Questions (FAQ):
- Q: What type of bulb is recommended for the Ezra Wall Light?
A: We recommend using a B12 or T20 light bulb with a maximum wattage of 60 (not included).
Ok, let’s get rolling
This should be easy, just follow our instructions and you will be back to
Netflix in no time.
Estimated time for assembly
20:00
What you need
- Your favorite snack or energy bar (Save the bubbly for once your fixture is safely installed!)
- Use the packaging carton as a working surface to prevent product damage during assembly
- Phillips head screwdriver
Toll-free at 1-866-619-1004
Help@nathanjames.com
Nathanjames.com/help
What’s included
Safety first, fun later
Use this light fixture responsibly with the primary concern for your safety. Follow assembly instructions carefully and inspect product upon receipt and each use. Nathan James and its parent companies cannot be held legally responsible for any injuries or death resulted from failure to follow instructions or improper use of this product.
Do not modify the structure of this product in any way.
Our products have been tested to meet specific safety measures as they were
originally intended to be sold. Any modifications will present the risk of
creating significant safety issues which Nathan James will not be responsible
for.
Proper use
- DO NOT use for commercial purposes
- DO NOT leave spilled liquid on fixture
- DO NOT use light fixture if damaged
- DO NOT make temporary repairs
- DO NOT use outdoors
WARNING
Inspect the wire insulation for any cuts, abrasions, or exposed copper that
may have occurred during shipping. If there is a defect in the wire, do not
attempt installation. Please reach out to our Customer Happiness team at
help@nathanjames.com or
1-866-619-1004
WARNING: RISK OF ELECTRIC SHOCK
Before starting the installation, disconnect the power by turning off the
circuit breaker or by removing the appropriate fuse at the fuse box. Turning
the power off at the switch is NOT SUFFICIENT to prevent electrical shock.
PLEASE CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS.
The goods
IMPORTANT
- Do not tighten bolts/screws completely until all bolts/screws are lined up and inserted into holes.
- Do not over tighten screws and bolts to avoid stripping.
- Please use hand tools to assemble this product. Do not use power tools.
Pre-Installation
- Read all instructions prior to beginning assembly.
- To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
- Keep the receipt and these instructions for proof of purchase.
- Suggested Bulb: B10 Vintage LED 60 Watt Equivalent | E12 Candelabra Base | Dimmable
- Fixture Max Wattage: 60W
INSTALLATION
-
Step 1
It’s as easy as it looks! Remove the Mounting Screws (E) from the sides of the Fixture (1) to separate it from the Mounting Plate (A). -
Step 2
Using the Mounting Screws (B), secure the Mounting Plate to your pre-existing electrical box. -
Step 3
Insert the bulb. We recommend one B12 or T20 light bulb with a maximum wattage of 60 (not included). -
Step 4
Slide the Marble Diffuser (2) into place on the Fixture (1). -
Step 5
Using the Mounting Screws (F), secure the Marble Diffuser (2) place. Use the Allen Key (D) to tighten.
Be sure not to over-tighten the decorative screws. -
Step 6
Wrap the ground wire from the Fixture (1) around the grounding screw on the Mounting Plate (A) and secure in place with a screwdriver.
-
Step 7
Join the ground wire from the electrical box with the ground wire from the Fixture (1) using the Wire Connector (C).
-
Step 8
Use Wire Connectors (C) to join the matching colored wires (white to white, black to black). Once complete, be sure to tuck the excess wire into the electrical box.
-
Step 9
You made it to the last step! We’re so proud of you. Now would be a great time to order a celebratory pizza (or two, you deserve it). First, be sure that you have tucked all of the excess wires back into the electrical box. Lastly, attach the Fixture (1) to the Mounting Plate (A) on the electrical box using the Mounting Screws (E).
Questions
Don’t worry, we’ve got the answers
-
What other light bulbs can fit in this light?
The bulb must not be greater than the max wattage for the fixture. It must match the base size, and the diameter of any area of the bulb should be less than diameter of any area of shade, so that it can fit. -
Can I use an LED light bulb?
Yes, so long that the base size matches and the diameter of any area of bulb is less than diameter of any area of shade, so that it can fit. -
Is this UL/ETL certified?
Yes, all our products are either UL or ETL. -
Do I need an electrician to set up the hardwire?
We recommend using a certified electrician for all hardwiring, although all of our fixtures can be set up without an electrician, as long as you are replacing an existing fixture or have an existing junction box ready for a fixture installation. ENSURE POWER IS OFF WHEN INSTALLING. For all new constructions, please use a certified electrician. -
Can I retrofit this hard-wired to a plug-in or vice-versa?
Yes, a plug-in fixture can be turned into a hardwire fixture and a hardwire fixture can become a plug-in fixture. For many products we will provide all the necessary hardware to make these changes, if not, you will need to purchase the necessary hardware. -
Is this light compatible outside North America?
Our lighting is only warranted in Canada and the United States. -
What do I do if the product is not working?
Try a different light bulb and confirm proper installation. -
Can these lights work on a dimmer?
Dimmability is related to the light bulb and the wall switch, not the light fixture. All our hardwire fixtures are compatible with dimmable light bulbs. We recommend using a dimmer switch, as it extends the life of the bulb and allows for energy saving and great ambiance. If using a LED bulb, please ensure both your LED bulb and dimmer switch are compatible. -
Can I use the fixture outdoors?
No, this product was not designed to be used outdoors.
No heartburn, when we handle the return
Give us a call 1-866-619-1004 or shoot
us a message at help@nathanjames.com we will
issue you a free replacement with zero hassle.
We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.
We are only in business if you’re happy
For starters, thanks for being you.
- Toll-free at 1-866-619-1004
- Help@nathanjames.com
- NathanJames.com/help
We do our best to ensure your product arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. If a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free.
Warranty
This product comes with a lifetime warranty from the date of purchase. Please
use your phone to scan the QR code to register your product or visit
https://goo.gl/i9dk3q
Did we do alright? Please spread the love!
If you are happy with your product, tell your friends and family about us or
even better leave us a review online. Spreading the word allows us to make
more people happy and keep our prices low for your next purchase.
Scan me!
Free Lifetime Warranty:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>