Dongguan Pinmi Electronic Technology S32 TWS Earbuds User Manual

Dongguan Pinmi Electronic Technology S32 TWS Earbuds User Manual

Specifications

Diagram

Power ON

Power OFF

Pairing:

1. Earbuds pairing
The earbuds will enter pairing mode and pair once you open the case.

One flash blue and red, other one flash blue 1 time every 5  seconds means 2 earbuds are paired.

2. Earbuds pair with phone
Turn on the Bluetooth of your phone, search for “S32” and connect.

2 earbuds indicator both flash blue I time every 5 seconds  means paired with phone.

3. Open your phone music player and hit play, you can enjoy music wirelessly.

Auto Power Off:

The earbuds will power off automatically if not paired with  phone in 3 minutes.

Auto-connect:

The earbuds will auto connect the last paired phone when  turned on next time. (Turn on the Bluetooth of your phone  first, and then power on the earbuds.)

Clear pairing history:

In power off state, touch and hold the MFB for 10 seconds  until LED flash red and blue 3 times. You need to put the  earbuds back into the case and close it, then open the case  and pair again.

Button Operation

• Touch 1 time: Play/Pause music
• Touch 2 times: Answer/Hang up phone calls
• Touch 3 times: Activate phone voice control
• Touch and hold for 2 seconds: Reject phone calls /Switch phone call from earbuds or cellphone
• Touch and hold for 3 seconds: Power on
• Touch and hold for 5 seconds: Power off

Low Power Warning:

Earbud: The earbud indicator flash red, voice prompt 1 time  every 2 minutes.
Case: The middle case indicator turn red.

Charging:

Open the charging chamber, put the earphone into the charging  chamber, close the cover, and the earphone will automatically turn  off for charging.

When charging, the earbud charging indicator flash green  15s and go off.

Case charging: Use type-c cable to charge the case with  DC5V power supply only. (Do not use power supply higher  than 5V)

The case battery level indicator flash red when charging, turn green after charging finished.

Earbud Indicator:

Case Indicator:

Packing Include:

Case 1
Earbud 2
Silicone earmuffs 2 pairs
Type-C Cable 1
User Manual *1

FAQ:

Q1: The product can’t pair with my phone.

1. Please make sure the earbuds are in pairing mode and  not paired by other device, the indicator flashes red and  blue means it’s in pairing mode.
2. Clear the pairing history of the product. Power on and  pair again.
3. Clear the pairing history of your phone. Turn off the  Bluetooth then turn on, and pair again.

Q2: The Bluetooth range or the sound quality is not  good.

1. Bluetooth signal can be blocked by surrounding objects  thus affect the audio quality, if no obstacle between the  product and your phone, the range and sound quality will  be better.
2. Turn off the unnecessary wireless device around.
3. Turn off your phone’s unnecessary APPs running in the  background.

Q3: Why there is a delay?
There is a data transmission process from your phone to  the product, so sometimes you can feel delay. It’s a  common issue for all the Bluetooth devices, and Bluetooth  V5.O already made it better than the old versions.

Q4: Why the case can’t charge the earbuds, or the  earbuds won’t power off after put back in case?

1. 1f the case has no power, then above issues happen, please  charge the case, and it will turn normal after the case has power.
2. Please make sure you didn’t put the right & left earbud in the  opposite place, and the magnet contacts well.
3. 1f the earbuds come with blue charging insulation sticker,  please make sure you removed them before charge.

Q5: Why people can’t hear me in the call?
Please make sure you wear 2 earbuds when making calls.

Q6: Only I earbud pair with my phone.
You need to let the 2 earbuds pair first, one indicator flash blue  and other one flash blue and red means 2 earbuds paired, and  then turn on phone Bluetooth to pair with the earbuds.

FCC Compliance Statement:

Changes or modifications not expressly approved by the party  responsible for compliance could void the user’s authority to  operate the equipment.

This equipment has been tested and found to comply with the  limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable  protection against harmful interference in a residential  installation. This equipment generates, uses and can radiate  radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful  interference to radio communications. However, there is no  guarantee that interference will not occur in a particular  installation.

If this equipment does cause harmful interference to radio or  television reception, which can be determined by turning the  equipment off and on, the user is encouraged to try to correct  the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
• Connect the equipment into an outlet on a circuit  different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV  technician for help.

RF Exposure Compliance Statement:
This equipment complies with FCC radiation exposure  limits set forth for an uncontrolled environment. This  transmitter must not be co-located or operating in  conjunction with any other antenna or transmitter.

CORRECT DISPOSAL OF THIS  PRODUCT

(Waste Electrical & Electronic Equipment)
This making shown on the product or its literature,  indicates that it should not be disposed with other  household wastes at the end of its working life.

To prevent possible harm to the environment or human  health from uncontrolled waste disposal, please separate  this from other types of wastes and recycle it responsibly  to promote the sustainable reuse of material resources.

Household user should contact either the retailer where  they purchased this product or their local government  office for details of where and how they can take this item  for environmentally safe recycling.

Business users should contact their supplier and check the  terms and conditions of the purchase contract. This  product should not be mixed with other commercial wastes  for disposal.

This device complies with Part 15 of the FCC Rules. Operation is  subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including  interference that may cause undesired operation.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>