SOUNDPEATS Free2 Classic Wireless Earbuds User Guide

: June 6, 2024
: SoundPEATS

Table of Contents

SOUND PEATS Free2 Classic Wireless Earbuds
[
First Time Using
Reset
**Wearing
Product Diagram
Control
Q&A
FCC statement
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SOUND PEATS Free2 Classic Wireless Earbuds

[

SOUNDPEATS-Free2-Classic-Wireless-Earbuds ](https://manuals.plus/wp-content/uploads/2022/04/SOUNDPEATS- Free2-Classic-Wireless-Earbuds.webp)

First Time Using

SOUNDPEATS-Free2-Classic-Wireless-Earbuds-
fig-1

0pen the charging case lid and take out both earbuds. Two earbuds will turn on and enter pairing mode.
When the earbuds pair successfully, the red and white lights on the main earbud will flash alternately, the white light on the secondary earbud will stay on. Now you can connect the earbuds to your device.
Activate the Bluetooth on your device and choose “SOUNDPEATS Free2 classic11 to connect

Reset

Open the case lid, and make sure both earbuds or charging (the red lights on the earbuds stay on). Press and hold the MFBs on both earbuds for lO seconds until the red and white lights flash twice alternately, reset completely.

**Wearing

SOUNDPEATS-Free2-Classic-Wireless-Earbuds-
fig-3 **

Identify the le and right earbuds.
Rotate earbuds and find the most comfortable position.

Product Diagram

SOUNDPEATS-Free2-Classic-Wireless-Earbuds-
fig-4

Control

Power On| Auto: Open the case lid and take out both earbuds

Manually: Press and hold the MFB for l .Ss

---|---
Power Off| Auto: Place back Into charging case

Manually: Press and hold the MFB for 1 Os

Q&A

Ql: What does the indicator on the charging case tell?
When charging the charging case, the indicator light shows:

1. .Charging: blue light flashes
2. Fully charged: blue light stays on

Q2: How to charge the charging case?

1. Use a Type-C adopter to charge the case (current no more than l A).
2. Please charge the earbuds and charging case at least once per 3 months when not In use for a long time.

Q3: Why are the earbuds still connecting to my phone after placing them back and closing the case lid?

1. .The charging case has no remaining power. Placing the earbuds back into the charging case can’t turn them off if the case battery is dead.
2. Please make sure the earbuds are correctly placed In the charging case, and make sure the charging contactors ore clean. Please try to clean the places between the charging case and the earbuds with something like a microfiber cloth.

FCC statement

This equipment has been tested and found to comply with the trmlts for o Closs B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful Interference In o residential installation. this equipment generates uses and con radiate radio frequency energy and, II not Installed and used In accordance with the instructions, may cause harmful interference to radio communications. HoW9V8{, there Is no guarantee that interference will not occur In o particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment Off and on, the user IS encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment Into an outlet on a circuit different from! hot too which the receiver Is connected.
Consult the dealer or an experienced radio/TV technician for help.

The device complies with part 15 of the FCC rules. Operation Is subject to the following two conditions:

this device may not cause harmful lnt8fference.
this device must accept any interference received, Including Interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible tor compliance could void the user’s authority to operate the equipment.

ICED
This device complies with Industry Canada licence-exempt RSS standard(s). Operation ls subject to the following two conditions:
(I) this device may not cause interference, and
(2) this device must accept any interference, including Interference lithotomy cause und8Slred operation of the device.”