hansgrohe 14872XXX Talis S2 Variarc Kitchen Mixer Tap Instruction Manual

: October 30, 2023
: hansgrohe

Table of Contents

hansgrohe 14872XXX Talis S2 Variarc Kitchen Mixer Tap
Product Information
Product Usage Instructions
Safety Notes
Technical Data
Assembly
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

hansgrohe 14872XXX Talis S2 Variarc Kitchen Mixer Tap

hansgrohe-14872XXX-Talis-S2-Variarc-Kitchen-Mixer-Tap-
product

Product Information

The user manual provides product information in multiple languages, including German, French, English, Italian, Spanish, Dutch, Danish, Polish, Swedish, Lithuanian, Croatian, Turkish, Romanian, Greek, Slovenian, Estonian, Latvian, Serbian, Norwegian, and Arabic. The product is a mixer with a hot water limiter and an anti-pollution function. It has a maximum operating pressure of 1 MPa and a test pressure of 1.6 MPa. The recommended operating pressure ranges from 0.1 to 0.5 MPa. The recommended hot water temperature is not specified. The rate of flow by 0.3 MPa is 11 l/min for the mixer and 9 l/min for the hand spray flow rate and aerator flow rate.

Product Usage Instructions

Wear protective gloves during installation to prevent crushing and cutting injuries.
Ensure that the hot and cold supplies have equal pressures.
Regularly check the non-return valves as per DIN EN 1717 in accordance with national or regional regulations (at least once a year).
To adjust the hot water limiter on single lever mixers, refer to page 39. No adjustment is necessary when using a continuous-flow water heater.
Do not use silicone-containing acetic acid.
If the water flow drops, clean the filter located between the hose and hand spray.
Refer to page 32 for assembly instructions.
Refer to page 34 for cleaning instructions.
Refer to page 36 for operation instructions.
Refer to page 38 for spare parts information.
Refer to page 35 for maintenance information.

Safety Notes

Gloves should be worn during installation to prevent crushing and cutting injuries.
The hot and cold supplies must be of equal pressure. Installation Instructions
The fitting must be installed, flushed, and tested after the valid norms!

Technical Data

Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 – 0,5 MPa
Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 80°C
Recommended hot water temp.: 65°C
Rate of flow by 0,3 MPa:
Handspray flow rate: 11 l/min
Aerator flow rate: 9 l/min anti-pollution function

Hansgrohe mixers can be used together with hydraulically and thermally controlled continuous flow heaters if the flow pressure is at least 0,15 MPa.

Maintenance (see page 35)
The nonreturn valves must be checked regularly according to DIN EN 1717 in accordance with national or regional regulations (at least once a year).
To adjust the hot water limiter on single lever mixers, please see page 39. No adjustment is necessary when using a continuous-flow water heater.
Do not use silicone-containing acetic acid!
Dimensions (see page 31)
Spare parts (see page 38)
Operation (see page 36)
Cleaning (see page 34)
If the waterflow drops, clean the filter located between hose and hand spray .